The minimum number of errors that must be observed
within the number of events specified by usdFrDlcmiMonitoredEvents,
to declare the interface down.
'error' is lack of receipt of a Status, in response to an
issued Status Enquiry, within the Polling Interval (T391).
Pertains to DTE/NNI operation only. This parameter can
be reconfigured only when the Frame Relay interface
is acting as a DTE or NNI.
Parsed from file usDataFr.mi2.txt
Company: None
Module: Unisphere-Data-FRAME-RELAY-MIB
The minimum number of errors that must be observed within the number of
events specified by juniFrDlcmiMonitoredEvents, to declare the interface
down.
'error' is lack of receipt of a Status, in response to an issued Status
Enquiry, within the Polling Interval (T391).
Pertains to DTE/NNI operation only. This parameter can be reconfigured
only when the Frame Relay interface is acting as a DTE or NNI.
Parsed from file Juniper-FRAME-RELAY-MIB.mib
Module: Juniper-FRAME-RELAY-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-FRAME-RELAY-MIB
[Automatically extracted from oidview.com]
usdFrDlcmiErrorThreshold OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum number of errors that must be observed within the number of events specified by usdFrDlcmiMonitoredEvents, to declare the interface down. 'error' is lack of receipt of a Status, in response to an issued Status Enquiry, within the Polling Interval (T391). Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI." REFERENCE "American National Standard T1.617-1991, Section D.5.1 Counter N392." DEFVAL { 3 } ::= { usdFrDlcmiEntry 7 }
juniFrDlcmiErrorThreshold OBJECT-TYPE SYNTAX Integer32 (1..10) MAX-ACCESS read-create STATUS current DESCRIPTION "The minimum number of errors that must be observed within the number of events specified by juniFrDlcmiMonitoredEvents, to declare the interface down. 'error' is lack of receipt of a Status, in response to an issued Status Enquiry, within the Polling Interval (T391). Pertains to DTE/NNI operation only. This parameter can be reconfigured only when the Frame Relay interface is acting as a DTE or NNI." REFERENCE "American National Standard T1.617-1991, Section D.5.1 Counter N392." DEFVAL { 3 } ::= { juniFrDlcmiEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.1 | juniFrDlcmiIfIndex, usdFrDlcmiIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.2 | juniFrDlcmiState, usdFrDlcmiState | 0 | 0 | This variable states which Data Link Connection Management scheme is active (and by implication, what DLCI it uses) on the Frame … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.3 | juniFrDlcmiAddress, usdFrDlcmiAddress | 0 | 0 | This variable states which address format is in use on the Frame Relay interface. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.4 | juniFrDlcmiAddressLen, usdFrDlcmiAddressLen | 0 | 0 | This variable states the address length in octets. In the case of Q922 format, the length indicates the entire length of the ad… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.5 | juniFrDlcmiPollingInterval, usdFrDlcmiPollingInterval | 0 | 0 | This is the number of seconds between successive status enquiry messages sent by the DTE. Pertains to DTE/NNI operation only. Th… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.6 | juniFrDlcmiFullEnquiryInterval, usdFrDlcmiFullEnquiryInterval | 0 | 0 | Number of status enquiry intervals that pass before issuance of a full status enquiry message. Pertains to DTE/NNI operation only… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.8 | juniFrDlcmiMonitoredEvents, usdFrDlcmiMonitoredEvents | 0 | 0 | The number of status polling intervals over which the error threshold is counted. For example, if within 'MonitoredEvents' numb… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.9 | juniFrDlcmiMaxSupportedVCs, usdFrDlcmiMaxSupportedVCs | 0 | 0 | The maximum number of Virtual Circuits allowed for this interface. Usually dictated by the Frame Relay network. In response to a … |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.10 | juniFrDlcmiMulticast, usdFrDlcmiMulticast | 0 | 0 | This indicates whether the Frame Relay interface is using a multicast service. |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.11 | juniFrDlcmiStatus, usdFrDlcmiStatus | 0 | 0 | This indicates the status of the Frame Relay interface as determined by the performance of the DLCMI. If no DLCMI is running, t… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.12 | juniFrDlcmiRowStatus, usdFrDlcmiRowStatus | 0 | 0 | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the fol… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.13 | juniFrDlcmiLowerIfIndex, usdFrDlcmiLowerIfIndex | 0 | 0 | The ifIndex of an interface over which this Frame Relay interface is to be layered. A value of zero indicates no layering. An imp… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.14 | juniFrDlcmiRole, usdFrDlcmiRole | 0 | 0 | Specifies the role this interface assumes with respect to the remote end. When acting as a DTE, the following objects are not rel… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.15 | juniFrDlcmiDcePollingInterval, usdFrDlcmiDcePollingInterval | 0 | 0 | The number of seconds within which a DCE expects to receive a Status Enquiry from the DTE. This value corresponds to the T392 tim… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.16 | juniFrDlcmiDceErrorThreshold, usdFrDlcmiDceErrorThreshold | 0 | 0 | The minimum number of errors that must be observed within the number of events specified by juniFrDlcmiDceMonitoredEvents, to de… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.17 | juniFrDlcmiDceMonitoredEvents, usdFrDlcmiDceMonitoredEvents | 0 | 0 | The number of DCE polling intervals over which accumulated errors are counted against the threshold specified in juniFrDlcmiDceE… |
| 1.3.6.1.4.1.4874.2.2.10.1.1.2.1.18 | juniFrDlcmiMultilinkFrBundleName | 0 | 0 | This represents multilink frame relay bundle name. This object must be configured to associate the bundle name to the frame rel… |