Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
usdIpIfRowStatus
usdIpIfLowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for usdIpIfIndex must have been determined previously,
typically by reading usdIpNextIfIndex.
The interface identified by a nonzero usdIpIfLowerIfIndex must exist.
If usdIpIfType is configured to be 'loopback' or 'null',
usdIpIfLowerIfIndex must be set to zero.
The selected value of usdIpIfType must be compatible with the
underlying media interface identified by usdIpIfLowerIfIndex.
Once created, the following objects may not be modified:
usdIpIfLowerIfIndex
usdIpIfType
usdIpIfTypeId
A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed
as a result of creating/destroying an entry in this table.
Parsed from file usDataIp.mi2.txt
Company: None
Module: Unisphere-Data-IP-MIB
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniIpIfRowStatus
juniIpIfLowerIfIndex
In addition, when creating an entry the following conditions must hold:
A value for juniIpIfIndex must have been determined previously,
typically by reading juniIpNextIfIndex.
The interface identified by a nonzero juniIpIfLowerIfIndex must
exist.
If juniIpIfType is configured to be 'loopback' or 'null',
juniIpIfLowerIfIndex must be set to zero.
The selected value of juniIpIfType must be compatible with the
underlying media interface identified by juniIpIfLowerIfIndex.
Once created, the following objects may not be modified:
juniIpIfLowerIfIndex
juniIpIfType
juniIpIfTypeId
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
destroyed as a result of creating/destroying an entry in this table.
Parsed from file Juniper-IP-MIB.mib
Module: Juniper-IP-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-IP-MIB
[Automatically extracted from oidview.com]
usdIpIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdIpIfRowStatus usdIpIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdIpIfIndex must have been determined previously, typically by reading usdIpNextIfIndex. The interface identified by a nonzero usdIpIfLowerIfIndex must exist. If usdIpIfType is configured to be 'loopback' or 'null', usdIpIfLowerIfIndex must be set to zero. The selected value of usdIpIfType must be compatible with the underlying media interface identified by usdIpIfLowerIfIndex. Once created, the following objects may not be modified: usdIpIfLowerIfIndex usdIpIfType usdIpIfTypeId A corresponding entry in ifTable/ifXTable/usdIfTable is created/destroyed as a result of creating/destroying an entry in this table." ::= { usdIpIfEntry 2 }
juniIpIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: juniIpIfRowStatus juniIpIfLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for juniIpIfIndex must have been determined previously, typically by reading juniIpNextIfIndex. The interface identified by a nonzero juniIpIfLowerIfIndex must exist. If juniIpIfType is configured to be 'loopback' or 'null', juniIpIfLowerIfIndex must be set to zero. The selected value of juniIpIfType must be compatible with the underlying media interface identified by juniIpIfLowerIfIndex. Once created, the following objects may not be modified: juniIpIfLowerIfIndex juniIpIfType juniIpIfTypeId A corresponding entry in ifTable/ifXTable/juniIfTable is created/ destroyed as a result of creating/destroying an entry in this table." ::= { juniIpIfEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.1 | juniIpIfIndex, usdIpIfIndex | 0 | 0 | The ifIndex of the IP interface. When creating entries in this table, suitable values for this object are determined by reading… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.3 | juniIpIfLowerIfIndex, usdIpIfLowerIfIndex | 0 | 0 | The ifIndex of a media interface over which this IP interface is to be layered. A value of zero is used when usdIpIfType is spe… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.4 | juniIpIfType, usdIpIfType | 0 | 0 | juniIpIftype |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.5 | juniIpIfTypeId, usdIpIfTypeId | 0 | 0 | juniIpIftypeId |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.6 | juniIpIfSAValidationEnable, usdIpIfSAValidationEnable | 0 | 0 | Enable/disable source address validation on this IP network interface. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.7 | juniIpIfCreationType, usdIpIfCreationType | 0 | 0 | Specify if the interface was created due to static configuration or due to some dynamic event. Dynamic interfaces are not store… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.8 | juniIpIfProfileId, usdIpIfProfileId | 0 | 0 | Identified the profile used when creating a dynamic interface. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.9 | juniIpIfAlwaysUp, usdIpIfAlwaysUp | 0 | 0 | When enabled, the interface is determined to be up regardless of the state of any lower layer interfaces. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.10 | juniIpIfLoopback, usdIpIfLoopback | 0 | 0 | Indicates whether the interface is a loopback type interface. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.11 | juniIpIfLoopbackUid, usdIpIfLoopbackUid | 0 | 0 | Specify the interface index of a loopback interface whose IP address should be used when sourcing traffic on this interface. Us… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.12 | juniIpIfDebounceTime, usdIpIfDebounceTime | 0 | 0 | Specifies the time in milliseconds that a layer 2 interface must remain in a state before it is conveyed to the IP layer. Usefu… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.13 | juniIpIfForwarding, usdIpIfForwarding | 0 | 0 | Enable/disable the forwarding of IP traffic to/from this interface. This is currently only applicable to the out-of-band managem… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.14 | juniIpIfForceFragmentation, usdIpIfForceFragmentation | 0 | 0 | Force the fragmentation of all IP packets greater than the interface MTU even if the DF bit is set. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.15 | juniIpIfSharesLowerUid, usdIpIfSharesLowerUid | 0 | 0 | Identifies the interface as sharing a lower interface with another interface vs owning it outright. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.16 | juniIpIfFilterOptions, usdIpIfFilterOptions | 0 | 0 | Bit mask to configure the interface to filter packets with IP header options. Currently, either no bits or all bits may be set. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.17 | juniIpIfName, usdIpIfName | 0 | 0 | Specify the IP interface discriminator for an IP interface not attached to a layer 2 interface with a specific location. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.18 | juniIpIfArpTimeout, usdIpIfArpTimeout | 0 | 0 | Specify the ARP timeout for this interface in seconds. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.19 | juniIpIfAdminSpeed, usdIpIfAdminSpeed | 0 | 0 | Set an administrative speed for the interface that overrides the speed learned from the lower layer. A value of 0 indicates no … |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.20 | juniIpIfMultipathMode, usdIpIfMultipathMode | 0 | 0 | Configure the mode this interface should use when forwarding equal-cost multipath traffic. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.21 | juniIpIfSharedNhAddr, usdIpIfSharedNhAddr | 0 | 0 | The IP address of either a direct or indirect next-hop toward which this shared interface should point. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.22 | juniIpIfSharedNhRouterId, usdIpIfSharedNhRouterId | 0 | 0 | The identifier for the domain of a virtual router in which the usdIpIfSharedNhAddr should be resolved. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.23 | juniIpIfPrimaryIpAddress, usdIpIfPrimaryIpAddress | 0 | 0 | The IP address of the primary IP network on an interface. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.24 | juniIpIfPrimaryIpMask, usdIpIfPrimaryIpMask | 0 | 0 | The IP address mask of the primary IP network on an interface. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.25 | juniIpIfOperDebounceTime, usdIpIfOperDebounceTime | 0 | 0 | Indicates the operational time in milliseconds that a layer2 interface must remain in a state before it is conveyed to the IP la… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.26 | juniIpIfRouterIndex | 0 | 0 | The index or ID of the router. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.27 | juniIpIfInheritNum | 0 | 0 | Indicates whether this numbered interface is referenced by unnumbered interfaces. |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.28 | juniIpIfInheritNumUid | 0 | 0 | Specify the interface index of a numbered interface whose IP address should be used when sourcing traffic on this interface. Us… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.29 | juniIpIfAnalyzerMode | 0 | 0 | Used to set the interface to analyzer mode. When enabled(1), all IP packets entering this interface and all non-mirror IP packe… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.30 | juniIpIfAutoConfigure | 0 | 0 | When enabled, IP subscriber interfaces are created dynamically based on any attributes defined in the service-profile and the ru… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.31 | juniIpIfTcpMss | 0 | 0 | juniIpIftcpMss |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.32 | juniIpIfInitSeqPrefOper | 0 | 0 | Indicates the operational warm-restart replay initial sequence preference value for an IP interface. Following an HA SRP switch… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.33 | juniIpIfInitSeqPrefAdmin | 0 | 0 | Configures the warm-restart replay initial sequence preference value for an IP interface. See the juniIpIfInitSeqPrefOper descr… |
1.3.6.1.4.1.4874.2.2.12.1.1.2.1.34 | juniIpIfArpSpoofCheck | 0 | 0 | When enabled, IP ARP spoof checking is performed on ARP packets received on the IP interface. |