The administrative timing source for the ERX system. The ERX
periodically monitors the status of three timing sources, primary,
secondary and tertiary. If the systems current timing source fails, the
system will automatically downgrade to the next timing source. If the
system is configured to automatically upgrade
(juniERXSysTimingDisableAutoUpgrade is set to false(2)) the system will
switch back to the higher timing source when it becomes available.
A timing source failure can be detected by comparing the operational and
admin timing sources. If they are not equal, the system has swapped
timing sources because the administratively set value is in the error
state.
Parsed from file juniErxSystem.mi2.txt
Company: None
Module: Juniper-ERX-System-MIB
The administrative timing source for the ERX system. The ERX
periodically monitors the status of three timing sources, primary,
secondary and tertiary. If the systems current timing source fails, the
system will automatically downgrade to the next timing source. If the
system is configured to automatically upgrade
(usdERXSysTimingDisableAutoUpgrade is set to false(2)) the system will
switch back to the higher timing source when it becomes available.
A timing source failure can be detected by comparing the operational and
admin timing sources. If they are not equal, the system has swapped
timing sources because the administratively set value is in the error
state.
Parsed from file Unisphere-Data-ERX-System-MIB.mib
Module: Unisphere-Data-ERX-System-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-ERX-System-MIB
[Automatically extracted from oidview.com]
juniERXSysAdminTimingSource OBJECT-TYPE SYNTAX JuniTimingSelector MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The administrative timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the systems current timing source fails, the system will automatically downgrade to the next timing source. If the system is configured to automatically upgrade (juniERXSysTimingDisableAutoUpgrade is set to false(2)) the system will switch back to the higher timing source when it becomes available. A timing source failure can be detected by comparing the operational and admin timing sources. If they are not equal, the system has swapped timing sources because the administratively set value is in the error state." ::= { juniERXSysGeneral 16 }
usdERXSysAdminTimingSource OBJECT-TYPE SYNTAX UsdTimingSelector MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, secondary and tertiary. If the systems current timing source fails, the system will automatically downgrade to the next timing source. If the system is configured to automatically upgrade (usdERXSysTimingDisableAutoUpgrade is set to false(2)) the system will switch back to the higher timing source when it becomes available. A timing source failure can be detected by comparing the operational and admin timing sources. If they are not equal, the system has swapped timing sources because the administratively set value is in the error state." ::= { usdERXSysGeneral 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.17.1.1.16.0 | juniERXSysAdminTimingSource | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.17.1.1.1 | juniERXSysChassisRev, usdERXSysChassisRev | 1 | 1 | Chassis revision number. If unknown, the value 255 is reported. |
1.3.6.1.4.1.4874.2.2.17.1.1.2 | juniERXSysSwVersion, usdERXSysSwVersion | 1 | 1 | Currently executing operational software version. |
1.3.6.1.4.1.4874.2.2.17.1.1.3 | juniERXSysSwBuildDate, usdERXSysSwBuildDate | 1 | 1 | Build date of currently executing operational software version. |
1.3.6.1.4.1.4874.2.2.17.1.1.4 | juniERXSysRevertControl, usdERXSysRevertControl | 1 | 1 | Global revert control: off Disable global revert. immediate All slots are to revert immediately (asap). timeOfDa… |
1.3.6.1.4.1.4874.2.2.17.1.1.5 | juniERXSysRevertTimeOfDay, usdERXSysRevertTimeOfDay | 1 | 1 | The number of seconds past midnight on any given day at which time reverts are allowed to occur. This object must be set concur… |
1.3.6.1.4.1.4874.2.2.17.1.1.6 | juniERXSysBootConfigControl, usdERXSysBootConfigControl | 1 | 1 | System boot configuration control: file Revert to configuration settings specified by usdERXSysBootConfigFile. … |
1.3.6.1.4.1.4874.2.2.17.1.1.7 | juniERXSysBootBackupConfigControl, usdERXSysBootBackupConfigControl | 1 | 1 | System boot backup configuration control: file Revert to backup configuration settings specified by usdERXSysBoo… |
1.3.6.1.4.1.4874.2.2.17.1.1.8 | juniERXSysBootForceBackupControl, usdERXSysBootForceBackupControl | 1 | 1 | System boot force backup control: off Do not force revert to backup settings. on Do force revert to backup settings. |
1.3.6.1.4.1.4874.2.2.17.1.1.9 | juniERXSysBootAutoRevertControl, usdERXSysBootAutoRevertControl | 1 | 1 | System boot auto revert control: default Use default auto-revert tolerances. never Never auto-revert to backup. set Set a… |
1.3.6.1.4.1.4874.2.2.17.1.1.10 | juniERXSysBootAutoRevertCountTolerance, usdERXSysBootAutoRevertCountTolerance | 1 | 1 | The auto-revert reboot count tolerance. This object cannot be set to zero, but may contain a zero value when the control is set… |
1.3.6.1.4.1.4874.2.2.17.1.1.11 | juniERXSysBootAutoRevertTimeTolerance, usdERXSysBootAutoRevertTimeTolerance | 1 | 1 | The auto-revert reboot time tolerance. This object cannot be set to zero, but will contain a zero value when the control is set… |
1.3.6.1.4.1.4874.2.2.17.1.1.12 | juniERXSysBootReleaseFile, usdERXSysBootReleaseFile | 1 | 1 | The local boot release file name, with extension .rel. |
1.3.6.1.4.1.4874.2.2.17.1.1.13 | juniERXSysBootConfigFile, usdERXSysBootConfigFile | 1 | 1 | The local boot configuration file name, with extension .cnf. The usdERXSysBootConfigControl and usdERXSysBootConfigFile must be… |
1.3.6.1.4.1.4874.2.2.17.1.1.14 | juniERXSysBootBackupReleaseFile, usdERXSysBootBackupReleaseFile | 1 | 1 | The local backup boot release file name, with extension .rel. |
1.3.6.1.4.1.4874.2.2.17.1.1.15 | juniERXSysBootBackupConfigFile, usdERXSysBootBackupConfigFile | 1 | 1 | The local backup boot configuration file name, with extension .cnf. The usdERXSysBootBackupConfigControl and usdERXSysBootBackup… |
1.3.6.1.4.1.4874.2.2.17.1.1.17 | juniERXSysOperTimingSource, usdERXSysOperTimingSource | 1 | 1 | The operations timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, sec… |
1.3.6.1.4.1.4874.2.2.17.1.1.18 | juniERXSysTimingDisableAutoUpgrade, usdERXSysTimingDisableAutoUpgrade | 1 | 1 | This object controls the automatic timing selector upgrade. Setting this object to true(1) will prevent automatic upgrade to th… |
1.3.6.1.4.1.4874.2.2.17.1.1.19 | juniERXSysTimingSelectorTable, usdERXSysTimingSelectorTable | 1 | 6 | Table of system timing selectors. |
1.3.6.1.4.1.4874.2.2.17.1.1.20 | juniERXSysMemUtilPct, usdERXSysMemUtilPct | 1 | 1 | Percentage of system memory utilization. A value of -1 indicates the utilization is unknown. |
1.3.6.1.4.1.4874.2.2.17.1.1.21 | juniERXSysMemCapacity, usdERXSysMemCapacity | 1 | 1 | The total memory capacity of the system. |
1.3.6.1.4.1.4874.2.2.17.1.1.22 | juniERXSysHighMemUtilThreshold, usdERXSysHighMemUtilThreshold | 1 | 1 | The value of system memory utilization, where if reached for the first time will generate a high memory utilization event to the… |
1.3.6.1.4.1.4874.2.2.17.1.1.23 | juniERXSysAbatedMemUtilThreshold, usdERXSysAbatedMemUtilThreshold | 1 | 1 | The value of system memory utilization that is used to determine when to generate an abated memory utilization event notificatio… |
1.3.6.1.4.1.4874.2.2.17.1.1.24 | juniERXSysMemUtilTrapEnable, usdERXSysMemUtilTrapEnable | 1 | 1 | Controls the sending of system memory utilization events. Setting the value of this object to true(1) will cause system memory … |
1.3.6.1.4.1.4874.2.2.17.1.1.25 | juniERXSysGeneralTrapEnable | 1 | 1 | Controls whether a member of the set of ERX system notifications (traps) defined in this MIB or the counterpart notifications de… |