The value of system memory utilization that is used to determine when
to generate an abated memory utilization event notification to the
management entity on this system.
The value of this object must be less than the value of
juniERXSysHighMemUtilThreshold.
The abated memory utilization trap is sent once if the high memory
threshold was reached, and memory utilization falls to the value of this
object.
Parsed from file juniErxSystem.mi2.txt
Company: None
Module: Juniper-ERX-System-MIB
The value of system memory utilization that is used to determine when
to generate an abated memory utilization event notification to the
management entity on this system.
The value of this object must be less than the value of
usdERXSysHighMemUtilThreshold.
The abated memory utilization trap is sent once if the high memory
threshold was reached, and memory utilization falls to the value of this
object.
Parsed from file Unisphere-Data-ERX-System-MIB.mib
Module: Unisphere-Data-ERX-System-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-ERX-System-MIB
[Automatically extracted from oidview.com]
juniERXSysAbatedMemUtilThreshold OBJECT-TYPE SYNTAX Integer32 (0..99) UNITS "percent" MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The value of system memory utilization that is used to determine when to generate an abated memory utilization event notification to the management entity on this system. The value of this object must be less than the value of juniERXSysHighMemUtilThreshold. The abated memory utilization trap is sent once if the high memory threshold was reached, and memory utilization falls to the value of this object." DEFVAL { 75 } ::= { juniERXSysGeneral 23 }
usdERXSysAbatedMemUtilThreshold OBJECT-TYPE SYNTAX Integer32 (0..99) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of system memory utilization that is used to determine when to generate an abated memory utilization event notification to the management entity on this system. The value of this object must be less than the value of usdERXSysHighMemUtilThreshold. The abated memory utilization trap is sent once if the high memory threshold was reached, and memory utilization falls to the value of this object." DEFVAL { 75 } ::= { usdERXSysGeneral 23 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.17.1.1.23.0 | juniERXSysAbatedMemUtilThreshold | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.17.1.1.1 | juniERXSysChassisRev, usdERXSysChassisRev | 1 | 1 | Chassis revision number. If unknown, the value 255 is reported. |
1.3.6.1.4.1.4874.2.2.17.1.1.2 | juniERXSysSwVersion, usdERXSysSwVersion | 1 | 1 | Currently executing operational software version. |
1.3.6.1.4.1.4874.2.2.17.1.1.3 | juniERXSysSwBuildDate, usdERXSysSwBuildDate | 1 | 1 | Build date of currently executing operational software version. |
1.3.6.1.4.1.4874.2.2.17.1.1.4 | juniERXSysRevertControl, usdERXSysRevertControl | 1 | 1 | Global revert control: off Disable global revert. immediate All slots are to revert immediately (asap). timeOfDa… |
1.3.6.1.4.1.4874.2.2.17.1.1.5 | juniERXSysRevertTimeOfDay, usdERXSysRevertTimeOfDay | 1 | 1 | The number of seconds past midnight on any given day at which time reverts are allowed to occur. This object must be set concur… |
1.3.6.1.4.1.4874.2.2.17.1.1.6 | juniERXSysBootConfigControl, usdERXSysBootConfigControl | 1 | 1 | System boot configuration control: file Revert to configuration settings specified by usdERXSysBootConfigFile. … |
1.3.6.1.4.1.4874.2.2.17.1.1.7 | juniERXSysBootBackupConfigControl, usdERXSysBootBackupConfigControl | 1 | 1 | System boot backup configuration control: file Revert to backup configuration settings specified by usdERXSysBoo… |
1.3.6.1.4.1.4874.2.2.17.1.1.8 | juniERXSysBootForceBackupControl, usdERXSysBootForceBackupControl | 1 | 1 | System boot force backup control: off Do not force revert to backup settings. on Do force revert to backup settings. |
1.3.6.1.4.1.4874.2.2.17.1.1.9 | juniERXSysBootAutoRevertControl, usdERXSysBootAutoRevertControl | 1 | 1 | System boot auto revert control: default Use default auto-revert tolerances. never Never auto-revert to backup. set Set a… |
1.3.6.1.4.1.4874.2.2.17.1.1.10 | juniERXSysBootAutoRevertCountTolerance, usdERXSysBootAutoRevertCountTolerance | 1 | 1 | The auto-revert reboot count tolerance. This object cannot be set to zero, but may contain a zero value when the control is set… |
1.3.6.1.4.1.4874.2.2.17.1.1.11 | juniERXSysBootAutoRevertTimeTolerance, usdERXSysBootAutoRevertTimeTolerance | 1 | 1 | The auto-revert reboot time tolerance. This object cannot be set to zero, but will contain a zero value when the control is set… |
1.3.6.1.4.1.4874.2.2.17.1.1.12 | juniERXSysBootReleaseFile, usdERXSysBootReleaseFile | 1 | 1 | The local boot release file name, with extension .rel. |
1.3.6.1.4.1.4874.2.2.17.1.1.13 | juniERXSysBootConfigFile, usdERXSysBootConfigFile | 1 | 1 | The local boot configuration file name, with extension .cnf. The usdERXSysBootConfigControl and usdERXSysBootConfigFile must be… |
1.3.6.1.4.1.4874.2.2.17.1.1.14 | juniERXSysBootBackupReleaseFile, usdERXSysBootBackupReleaseFile | 1 | 1 | The local backup boot release file name, with extension .rel. |
1.3.6.1.4.1.4874.2.2.17.1.1.15 | juniERXSysBootBackupConfigFile, usdERXSysBootBackupConfigFile | 1 | 1 | The local backup boot configuration file name, with extension .cnf. The usdERXSysBootBackupConfigControl and usdERXSysBootBackup… |
1.3.6.1.4.1.4874.2.2.17.1.1.16 | juniERXSysAdminTimingSource, usdERXSysAdminTimingSource | 1 | 1 | The administrative timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary,… |
1.3.6.1.4.1.4874.2.2.17.1.1.17 | juniERXSysOperTimingSource, usdERXSysOperTimingSource | 1 | 1 | The operations timing source for the ERX system. The ERX periodically monitors the status of three timing sources, primary, sec… |
1.3.6.1.4.1.4874.2.2.17.1.1.18 | juniERXSysTimingDisableAutoUpgrade, usdERXSysTimingDisableAutoUpgrade | 1 | 1 | This object controls the automatic timing selector upgrade. Setting this object to true(1) will prevent automatic upgrade to th… |
1.3.6.1.4.1.4874.2.2.17.1.1.19 | juniERXSysTimingSelectorTable, usdERXSysTimingSelectorTable | 1 | 6 | Table of system timing selectors. |
1.3.6.1.4.1.4874.2.2.17.1.1.20 | juniERXSysMemUtilPct, usdERXSysMemUtilPct | 1 | 1 | Percentage of system memory utilization. A value of -1 indicates the utilization is unknown. |
1.3.6.1.4.1.4874.2.2.17.1.1.21 | juniERXSysMemCapacity, usdERXSysMemCapacity | 1 | 1 | The total memory capacity of the system. |
1.3.6.1.4.1.4874.2.2.17.1.1.22 | juniERXSysHighMemUtilThreshold, usdERXSysHighMemUtilThreshold | 1 | 1 | The value of system memory utilization, where if reached for the first time will generate a high memory utilization event to the… |
1.3.6.1.4.1.4874.2.2.17.1.1.24 | juniERXSysMemUtilTrapEnable, usdERXSysMemUtilTrapEnable | 1 | 1 | Controls the sending of system memory utilization events. Setting the value of this object to true(1) will cause system memory … |
1.3.6.1.4.1.4874.2.2.17.1.1.25 | juniERXSysGeneralTrapEnable | 1 | 1 | Controls whether a member of the set of ERX system notifications (traps) defined in this MIB or the counterpart notifications de… |