The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
juniPPPoEIfAutoconfig is set for this interface.
The ability to lockout the client from recognition in the event
of an error in creating a PPP interface is enabled by default.
The initial lockout duration is juniPPPoEIfLockoutMin and
increases exponentially for each failure that occurs for the client
interface within the greater of 15 minutes and this object's value.
The lockout duration for the client will not exceed juniPPPoEIfLockoutMax.
If the time between creation errors for the PPP interface for this
interface is greater than the greater of 15 minutes and
juniPPPoEIfLockoutMax, then the lockout duration reverts to
juniPPPoEIfLockoutMin.
To disable the ability to lockout the client from recognition in the
event of an error in creating a PPP interface for the specified interface,
the value of this object and juniPPPoEIfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except for
debugging purposes or when this interface supports more than one session.
Parsed from file juniPppoe.mi2.txt
Company: None
Module: Juniper-PPPOE-MIB
The upper bound, in seconds, of the time range used to specify
the duration of the lockout of the client from recognition for
the specified interface. This only takes effect if
juniPPPoEIfAutoconfig is set for this interface.
The ability to lockout the client from recognition in the event
of an error in creating a PPP interface is enabled by default.
The initial lockout duration is juniPPPoEIfLockoutMin and
increases exponentially for each failure that occurs for the client
interface within the greater of 15 minutes and this object's value.
The lockout duration for the client will not exceed juniPPPoEIfLockoutMax.
If the time between creation errors for the PPP interface for this
interface is greater than the greater of 15 minutes and
juniPPPoEIfLockoutMax, then the lockout duration reverts to
juniPPPoEIfLockoutMin.
To disable the ability to lockout the client from recognition in the
event of an error in creating a PPP interface for the specified interface,
the value of this object and juniPPPoEIfLockoutMin must be set to 0.
It is not recommended that this lockout feature be disabled except for
debugging purposes or when this interface supports more than one session.
Parsed from file Juniper-PPPOE-MIB.mib
Module: Juniper-PPPOE-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-PPPOE-MIB
[Automatically extracted from oidview.com]
juniPPPoEIfLockoutMax OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if juniPPPoEIfAutoconfig is set for this interface. The ability to lockout the client from recognition in the event of an error in creating a PPP interface is enabled by default. The initial lockout duration is juniPPPoEIfLockoutMin and increases exponentially for each failure that occurs for the client interface within the greater of 15 minutes and this object's value. The lockout duration for the client will not exceed juniPPPoEIfLockoutMax. If the time between creation errors for the PPP interface for this interface is greater than the greater of 15 minutes and juniPPPoEIfLockoutMax, then the lockout duration reverts to juniPPPoEIfLockoutMin. To disable the ability to lockout the client from recognition in the event of an error in creating a PPP interface for the specified interface, the value of this object and juniPPPoEIfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes or when this interface supports more than one session." DEFVAL { 0 } ::= { juniPPPoEIfEntry 13 }
juniPPPoEIfLockoutMax OBJECT-TYPE SYNTAX Integer32 (0..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "The upper bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the specified interface. This only takes effect if juniPPPoEIfAutoconfig is set for this interface. The ability to lockout the client from recognition in the event of an error in creating a PPP interface is enabled by default. The initial lockout duration is juniPPPoEIfLockoutMin and increases exponentially for each failure that occurs for the client interface within the greater of 15 minutes and this object's value. The lockout duration for the client will not exceed juniPPPoEIfLockoutMax. If the time between creation errors for the PPP interface for this interface is greater than the greater of 15 minutes and juniPPPoEIfLockoutMax, then the lockout duration reverts to juniPPPoEIfLockoutMin. To disable the ability to lockout the client from recognition in the event of an error in creating a PPP interface for the specified interface, the value of this object and juniPPPoEIfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes or when this interface supports more than one session." DEFVAL { 0 } ::= { juniPPPoEIfEntry 13 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1 | juniPPPoEIfIfIndex, usdPPPoEIfIfIndex | 0 | 0 | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2 | juniPPPoEIfMaxNumSessions, usdPPPoEIfMaxNumSessions | 0 | 0 | The number of sessions allowed on the PPPoE interface, zero indicates unlimited. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3 | juniPPPoEIfRowStatus, usdPPPoEIfRowStatus | 0 | 0 | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the fo… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4 | juniPPPoEIfLowerIfIndex, usdPPPoEIfLowerIfIndex | 0 | 0 | The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implem… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5 | juniPPPoEIfAcName, usdPPPoEIfAcName | 0 | 0 | The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6 | juniPPPoEIfDupProtect, usdPPPoEIfDupProtect | 0 | 0 | Flag to allow duplicate MAC addresses. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7 | juniPPPoEIfPADIFlag, usdPPPoEIfPADIFlag | 0 | 0 | This flag controls whether always repsond to a PADI with a PADO regardless of the ability to create the session and allows the s… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8 | juniPPPoEIfAutoconfig, usdPPPoEIfAutoconfig | 0 | 0 | This flags determines whether the upper PPPoE interface is created dynamically or statically. When enable(1) the interface is c… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.9 | juniPPPoEIfServiceNameTable | 0 | 0 | Associate a PPPoE Service Name Table with this interface for PADI processing. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.10 | juniPPPoEIfPadrRemoteCircuitIdCapture | 0 | 0 | This flags determines whether the remote circuit id string will be captured and subsequently used as the NAS-PORT-ID radius attri… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.11 | juniPPPoEIfMtu | 0 | 0 | The initial Maximum Transmit Unit (MTU) that the PPPoE major interface entity will advertise to the remote entity. If the value o… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.12 | juniPPPoEIfLockoutMin | 0 | 0 | The lower bound, in seconds, of the time range used to specify the duration of the lockout of the client from recognition for the… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.14 | juniPPPoEMaxSessionVsa | 0 | 0 | Configure the action to be taken by PPPoE when RADIUS server returns the PPPoE max-session value: override Override the curren… |