The auto-revert reboot count tolerance, used in conjunction with the
value of juniSystemBootAutoRevertTimeTolerance when
juniSystemBootAutoRevertControl is set to set(2) in the same PDU. For
example, if this object is set to 4 and
juniSystemBootAutoRevertTimeTolerance is set to 1200, then the boot
logic will choose backup mode if 4 system reboots occur within 20
minutes. This object cannot be set to zero, but may contain a zero
value when juniSystemBootAutoRevertControl is set to never(1).
Parsed from file juniSystem.mi2.txt
Company: None
Module: Juniper-System-MIB
The auto-revert reboot count tolerance, used in conjunction with the
value of juniSystemBootAutoRevertTimeTolerance when
juniSystemBootAutoRevertControl is set to set(2) in the same PDU. For
example, if this object is set to 4 and
juniSystemBootAutoRevertTimeTolerance is set to 1200, then the boot
logic will choose backup mode if 4 system reboots occur within 20
minutes. This object cannot be set to zero, but may contain a zero
value when juniSystemBootAutoRevertControl is set to never(1).
Parsed from file Juniper-System-MIB.mib
Module: Juniper-System-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-System-MIB
[Automatically extracted from oidview.com]
juniSystemBootAutoRevertCountTolerance OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "The auto-revert reboot count tolerance, used in conjunction with the value of juniSystemBootAutoRevertTimeTolerance when juniSystemBootAutoRevertControl is set to set(2) in the same PDU. For example, if this object is set to 4 and juniSystemBootAutoRevertTimeTolerance is set to 1200, then the boot logic will choose backup mode if 4 system reboots occur within 20 minutes. This object cannot be set to zero, but may contain a zero value when juniSystemBootAutoRevertControl is set to never(1)." ::= { juniSystemGeneral 11 }
juniSystemBootAutoRevertCountTolerance OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "The auto-revert reboot count tolerance, used in conjunction with the value of juniSystemBootAutoRevertTimeTolerance when juniSystemBootAutoRevertControl is set to set(2) in the same PDU. For example, if this object is set to 4 and juniSystemBootAutoRevertTimeTolerance is set to 1200, then the boot logic will choose backup mode if 4 system reboots occur within 20 minutes. This object cannot be set to zero, but may contain a zero value when juniSystemBootAutoRevertControl is set to never(1)." ::= { juniSystemGeneral 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1.1.11.0 | juniSystemBootAutoRevertCountTolerance | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1.1.1 | juniSystemSwVersion | 1 | 1 | Version identification of currently executing system-wide operational software. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.2 | juniSystemSwBuildDate | 1 | 1 | Build date of currently executing system-wide operational software version. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.3 | juniSystemMemUtilPct | 1 | 1 | Percentage of memory utilization on the primary system processor. A value of -1 indicates the utilization is unknown. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.4 | juniSystemMemCapacity | 1 | 1 | The total memory capacity in bytes of the primary system processor. If the memory capacity is greater than 2147483647, a -1 val… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.5 | juniSystemHighMemUtilThreshold | 1 | 1 | The value of memory utilization in the primary system processor, where, if reached for the first time after a high memory thresh… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.6 | juniSystemAbatedMemUtilThreshold | 1 | 1 | The value of memory utilization in the primary system processor that is used to determine when to send an abated memory utilizat… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.7 | juniSystemBootConfigControl | 1 | 1 | System boot configuration control: file - On a system reboot use the configuration settings specified by the juni… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.8 | juniSystemBootBackupConfigControl | 1 | 1 | System boot backup configuration control is used to determine the configuration to be used when the boot logic chooses backup mo… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.9 | juniSystemBootForceBackupControl | 1 | 1 | System boot force backup control: off - On the next system reboot do not force the boot logic to choose backup mode. on - On … |
| 1.3.6.1.4.1.4874.2.2.2.1.1.10 | juniSystemBootAutoRevertControl | 1 | 1 | The system boot auto-revert control is used to determine when the boot logic should choose backup mode based of the reboot histo… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.12 | juniSystemBootAutoRevertTimeTolerance | 1 | 1 | The auto-revert reboot time tolerance, used in conjunction with the value of juniSystemBootAutoRevertCountTolerance when juniSyst… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.13 | juniSystemBootReleaseFile | 1 | 1 | The system-wide boot release file name, with extension '.rel'. On a set operation, if there is no file found with the name spec… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.14 | juniSystemBootConfigFile | 1 | 1 | The system-wide boot configuration file name. This object and the juniSystemBootConfigControl object set to file(0) or fileOnce… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.15 | juniSystemBootBackupReleaseFile | 1 | 1 | The system-wide backup boot release file name, with extension '.rel'. A zero-length string indicates that there is no backup rel… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.16 | juniSystemBootBackupConfigFile | 1 | 1 | The system-wide backup boot configuration file name, with extension '.cnf'. The juniSystemBootBackupReleaseFile object, the juni… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.17 | juniSystemRedundancyRevertControl | 1 | 1 | Global control for reverting primary modules back from their active redundant spare modules: off - Disable global reverts o… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.18 | juniSystemRedundancyRevertTimeOfDay | 1 | 1 | The number of seconds past midnight local time on any given day at which time redundant slot reverts are allowed to occur. This… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.19 | juniSystemMemUtilTrapEnable | 1 | 1 | Controls the sending of primary system processor memory utilization events. Setting the value of this object to true(1) will ca… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.20 | juniSystemReloadSlotNumber | 1 | 1 | In a juniSystemReloadCommand notification, this object indicates the number of the slot that is being reloaded. Note that slot … |
| 1.3.6.1.4.1.4874.2.2.2.1.1.21 | juniSystemUtilizationThresholdDirection | 1 | 1 | The type of resource utilization notification being sent. See the DESCRIPTIONs for the juniSystemUtilizationTable elements for … |
| 1.3.6.1.4.1.4874.2.2.2.1.1.22 | juniSystemUtilizationTrapEnable | 1 | 1 | Controls the sending of system resource utilization threshold notifications. Setting the value of this object to true(1) will a… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.23 | juniSystemMemKBytesCapacity | 1 | 1 | The total memory capacity in kilo-bytes (1024 bytes) of the primary system processor. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.24 | juniSystemPortSfpPowerThresholdIfIndex | 0 | 0 | interface phy-uid. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.25 | juniSystemPortSfpPowerThresholdValue | 0 | 0 | represents power tx/rx max/min threshold value of sfp. currently displays 1.0000 for trap raised, 0.0000 for trap cleared |