The value of memory utilization in the primary system processor that is
used to determine when to send an abated memory utilization event
notification to the management entity on this system. The abated memory
utilization event occurs if a high memory threshold reset has not
occurred since the last high memory threshold event, and then the memory
utilization falls to or below the value of this object. The abated
memory utilization event then triggers a high memory threshold reset.
The value of this object must always be less than the value of
juniSystemHighMemUtilThreshold.
Parsed from file juniSystem.mi2.txt
Company: None
Module: Juniper-System-MIB
The value of memory utilization in the primary system processor that is
used to determine when to send an abated memory utilization event
notification to the management entity on this system. The abated memory
utilization event occurs if a high memory threshold reset has not
occurred since the last high memory threshold event, and then the memory
utilization falls to or below the value of this object. The abated
memory utilization event then triggers a high memory threshold reset.
The value of this object must always be less than the value of
juniSystemHighMemUtilThreshold.
Parsed from file Juniper-System-MIB.mib
Module: Juniper-System-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-System-MIB
[Automatically extracted from oidview.com]
juniSystemAbatedMemUtilThreshold OBJECT-TYPE SYNTAX Integer32 (0..98) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of memory utilization in the primary system processor that is used to determine when to send an abated memory utilization event notification to the management entity on this system. The abated memory utilization event occurs if a high memory threshold reset has not occurred since the last high memory threshold event, and then the memory utilization falls to or below the value of this object. The abated memory utilization event then triggers a high memory threshold reset. The value of this object must always be less than the value of juniSystemHighMemUtilThreshold." DEFVAL { 75 } ::= { juniSystemGeneral 6 }
juniSystemAbatedMemUtilThreshold OBJECT-TYPE SYNTAX Integer32 (0..98) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of memory utilization in the primary system processor that is used to determine when to send an abated memory utilization event notification to the management entity on this system. The abated memory utilization event occurs if a high memory threshold reset has not occurred since the last high memory threshold event, and then the memory utilization falls to or below the value of this object. The abated memory utilization event then triggers a high memory threshold reset. The value of this object must always be less than the value of juniSystemHighMemUtilThreshold." DEFVAL { 75 } ::= { juniSystemGeneral 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1.1.6.0 | juniSystemAbatedMemUtilThreshold | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.2.1.1.1 | juniSystemSwVersion | 1 | 1 | Version identification of currently executing system-wide operational software. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.2 | juniSystemSwBuildDate | 1 | 1 | Build date of currently executing system-wide operational software version. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.3 | juniSystemMemUtilPct | 1 | 1 | Percentage of memory utilization on the primary system processor. A value of -1 indicates the utilization is unknown. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.4 | juniSystemMemCapacity | 1 | 1 | The total memory capacity in bytes of the primary system processor. If the memory capacity is greater than 2147483647, a -1 val… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.5 | juniSystemHighMemUtilThreshold | 1 | 1 | The value of memory utilization in the primary system processor, where, if reached for the first time after a high memory thresh… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.7 | juniSystemBootConfigControl | 1 | 1 | System boot configuration control: file - On a system reboot use the configuration settings specified by the juni… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.8 | juniSystemBootBackupConfigControl | 1 | 1 | System boot backup configuration control is used to determine the configuration to be used when the boot logic chooses backup mo… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.9 | juniSystemBootForceBackupControl | 1 | 1 | System boot force backup control: off - On the next system reboot do not force the boot logic to choose backup mode. on - On … |
| 1.3.6.1.4.1.4874.2.2.2.1.1.10 | juniSystemBootAutoRevertControl | 1 | 1 | The system boot auto-revert control is used to determine when the boot logic should choose backup mode based of the reboot histo… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.11 | juniSystemBootAutoRevertCountTolerance | 1 | 1 | The auto-revert reboot count tolerance, used in conjunction with the value of juniSystemBootAutoRevertTimeTolerance when juniSyst… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.12 | juniSystemBootAutoRevertTimeTolerance | 1 | 1 | The auto-revert reboot time tolerance, used in conjunction with the value of juniSystemBootAutoRevertCountTolerance when juniSyst… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.13 | juniSystemBootReleaseFile | 1 | 1 | The system-wide boot release file name, with extension '.rel'. On a set operation, if there is no file found with the name spec… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.14 | juniSystemBootConfigFile | 1 | 1 | The system-wide boot configuration file name. This object and the juniSystemBootConfigControl object set to file(0) or fileOnce… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.15 | juniSystemBootBackupReleaseFile | 1 | 1 | The system-wide backup boot release file name, with extension '.rel'. A zero-length string indicates that there is no backup rel… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.16 | juniSystemBootBackupConfigFile | 1 | 1 | The system-wide backup boot configuration file name, with extension '.cnf'. The juniSystemBootBackupReleaseFile object, the juni… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.17 | juniSystemRedundancyRevertControl | 1 | 1 | Global control for reverting primary modules back from their active redundant spare modules: off - Disable global reverts o… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.18 | juniSystemRedundancyRevertTimeOfDay | 1 | 1 | The number of seconds past midnight local time on any given day at which time redundant slot reverts are allowed to occur. This… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.19 | juniSystemMemUtilTrapEnable | 1 | 1 | Controls the sending of primary system processor memory utilization events. Setting the value of this object to true(1) will ca… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.20 | juniSystemReloadSlotNumber | 1 | 1 | In a juniSystemReloadCommand notification, this object indicates the number of the slot that is being reloaded. Note that slot … |
| 1.3.6.1.4.1.4874.2.2.2.1.1.21 | juniSystemUtilizationThresholdDirection | 1 | 1 | The type of resource utilization notification being sent. See the DESCRIPTIONs for the juniSystemUtilizationTable elements for … |
| 1.3.6.1.4.1.4874.2.2.2.1.1.22 | juniSystemUtilizationTrapEnable | 1 | 1 | Controls the sending of system resource utilization threshold notifications. Setting the value of this object to true(1) will a… |
| 1.3.6.1.4.1.4874.2.2.2.1.1.23 | juniSystemMemKBytesCapacity | 1 | 1 | The total memory capacity in kilo-bytes (1024 bytes) of the primary system processor. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.24 | juniSystemPortSfpPowerThresholdIfIndex | 0 | 0 | interface phy-uid. |
| 1.3.6.1.4.1.4874.2.2.2.1.1.25 | juniSystemPortSfpPowerThresholdValue | 0 | 0 | represents power tx/rx max/min threshold value of sfp. currently displays 1.0000 for trap raised, 0.0000 for trap cleared |