Writing a value to this object causes all sessions to all peers to be
cleared; the value determines what type of clear is executed (hard
clear, soft clear in, soft clear out, etc.). Reading this object has no
effect and always returns resetTypeNoop.
Parsed from file usDataBgp.mi2.txt
Company: None
Module: Unisphere-Data-BGP-MIB
Writing a value to this object causes all sessions to all peers to be
cleared; the value determines what type of clear is executed (hard
clear, soft clear in, soft clear out, etc.). Reading this object has no
effect and always returns resetTypeNoop.
Parsed from file Unisphere-Data-BGP-MIB.mib
Module: Unisphere-Data-BGP-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-BGP-MIB
[Automatically extracted from oidview.com]
usdBgpResetAllConnectionType OBJECT-TYPE SYNTAX UsdBgpResetConnectionType MAX-ACCESS read-write STATUS current DESCRIPTION "Writing a value to this object causes all sessions to all peers to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop." DEFVAL { resetTypeNoop } ::= { usdBgpGeneralGroup 11 }
usdBgpResetAllConnectionType OBJECT-TYPE SYNTAX UsdBgpResetConnectionType MAX-ACCESS read-write STATUS current DESCRIPTION "Writing a value to this object causes all sessions to all peers to be cleared; the value determines what type of clear is executed (hard clear, soft clear in, soft clear out, etc.). Reading this object has no effect and always returns resetTypeNoop." DEFVAL { resetTypeNoop } ::= { usdBgpGeneralGroup 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.29.1.1.11.0 | juniBgpResetAllConnectionType | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.29.1.1.1 | juniBgpLocalAsNumber, usdBgpLocalAsNumber | 1 | 1 | The local autonomous system number. This object cannot be modified if BGP is enabled. |
1.3.6.1.4.1.4874.2.2.29.1.1.2 | juniBgpEnabled, usdBgpEnabled | 1 | 1 | Set this object to true(1) in order to have BGP router enabled. |
1.3.6.1.4.1.4874.2.2.29.1.1.3 | juniBgpIdentifier, usdBgpIdentifier | 1 | 1 | The BGP identifier of the local system. The identifier is the system router ID by default. |
1.3.6.1.4.1.4874.2.2.29.1.1.4 | juniBgpAlwaysCompareMed, usdBgpAlwaysCompareMed | 1 | 1 | Set this object to true(1) in order to compare metrics for paths from neighors of different ASs. |
1.3.6.1.4.1.4874.2.2.29.1.1.5 | juniBgpDefaultLocalPreference, usdBgpDefaultLocalPreference | 1 | 1 | The default local preference. |
1.3.6.1.4.1.4874.2.2.29.1.1.6 | juniBgpEqualCostLimit, usdBgpEqualCostLimit | 1 | 1 | The maximum equal cost paths to store in routing table. |
1.3.6.1.4.1.4874.2.2.29.1.1.7 | juniBgpClientToClientReflection, usdBgpClientToClientReflection | 1 | 1 | Set this object to true(1) in order to have client-to-client route reflection enabled. |
1.3.6.1.4.1.4874.2.2.29.1.1.8 | juniBgpClusterId, usdBgpClusterId | 1 | 1 | The cluster ID. When this object is zero, the router ID will be used. |
1.3.6.1.4.1.4874.2.2.29.1.1.9 | juniBgpConfederationId, usdBgpConfederationId | 1 | 1 | The confederation ID. When this object is zero, the router is not in a confederation. |
1.3.6.1.4.1.4874.2.2.29.1.1.10 | juniBgpMissingAsWorst, usdBgpMissingAsWorst | 1 | 1 | If this object is set to true(1) routes without a MED attribute are considered worse than routes with a MED attribute. If this … |
1.3.6.1.4.1.4874.2.2.29.1.1.12 | juniBgpAdvertiseInactive, usdBgpAdvertiseInactive | 1 | 1 | Set this object to true(1) in order to propagate received BGP routes which are not the best route in the IP forwarding table. |
1.3.6.1.4.1.4874.2.2.29.1.1.13 | juniBgpEnforceFirstAs, usdBgpEnforceFirstAs | 1 | 1 | Set this object to true(1) in order to check whether the first AS number in the AS-path in routes from EBGP peers is consistent … |
1.3.6.1.4.1.4874.2.2.29.1.1.14 | juniBgpConfedCompareMed, usdBgpConfedCompareMed | 1 | 1 | Set this object to true(1) in order to compare metrics for paths from neighors of different sub-ASs in the same confederation. |
1.3.6.1.4.1.4874.2.2.29.1.1.15 | juniBgpGlobalRetryInterval, usdBgpGlobalRetryInterval | 1 | 1 | The default number of seconds before BGP retries to establish an outgoing BGP session. |
1.3.6.1.4.1.4874.2.2.29.1.1.16 | juniBgpGlobalConfigKeepAliveInterval, usdBgpGlobalConfigKeepAliveInterval | 1 | 1 | Default time interval in seconds for the KeepAlive timer for all peers. Zero means don't send KeepAlive messages. |
1.3.6.1.4.1.4874.2.2.29.1.1.17 | juniBgpGlobalConfigHoldTime, usdBgpGlobalConfigHoldTime | 1 | 1 | Default time interval in seconds for the Hold timer for all peers. Zero means don't expect KeepAlive message to be received. |
1.3.6.1.4.1.4874.2.2.29.1.1.18 | juniBgpGlobalAsOriginationInterval, usdBgpGlobalAsOriginationInterval | 1 | 1 | Default time interval in seconds for the MinASOriginationInterval timer for all peers. |
1.3.6.1.4.1.4874.2.2.29.1.1.19 | juniBgpExternalAdvertisementInterval, usdBgpExternalAdvertisementInterval | 1 | 1 | Default time interval in seconds for the MinRouteAdvertisementInterval timer for all external peers. |
1.3.6.1.4.1.4874.2.2.29.1.1.20 | juniBgpGlobalRibOutEnabled, usdBgpGlobalRibOutEnabled | 1 | 1 | Set this object to true(1) in order to enable RIB-out by default for all peers, or to false(2) to disable RIB-out by default for… |
1.3.6.1.4.1.4874.2.2.29.1.1.21 | juniBgpOverloadShutdown, usdBgpOverloadShutdown | 1 | 1 | Set this object to true(1) for BGP to shut itself down when it runs out of memory. Set this object to false(2) for BGP to conti… |
1.3.6.1.4.1.4874.2.2.29.1.1.22 | juniBgpLogNeighborChanges, usdBgpLogNeighborChanges | 1 | 1 | Set this object to true(1) for BGP log a message whenever a peer enters or leaves the established state. |
1.3.6.1.4.1.4874.2.2.29.1.1.23 | juniBgpFastExternalFallover, usdBgpFastExternalFallover | 1 | 1 | Set this object to true(1) for BGP to immediately bring down any directly adjacent EBGP session on a link down. |
1.3.6.1.4.1.4874.2.2.29.1.1.24 | juniBgpInternalAdvertisementInterval, usdBgpInternalAdvertisementInterval | 1 | 1 | Default time interval in seconds for the MinRouteAdvertisementInterval timer for all internal peers. |
1.3.6.1.4.1.4874.2.2.29.1.1.25 | juniBgpMaxAsLimit, usdBgpMaxAsLimit | 1 | 1 | Maximum length of received AS-path. Received routes with an AS-path longer than this are not placed in the IP forwarding table … |
1.3.6.1.4.1.4874.2.2.29.1.1.26 | juniBgpOperationalState, usdBgpOperationalState | 1 | 1 | The BGP instance operational state. |
1.3.6.1.4.1.4874.2.2.29.1.1.27 | juniBgpPreviousOperationalState, usdBgpPreviousOperationalState | 1 | 1 | The BGP instance previous operational state. |
1.3.6.1.4.1.4874.2.2.29.1.1.28 | juniBgpAutomaticRouteTargetFilter, usdBgpAutomaticRouteTargetFilter | 1 | 1 | Set this object to true(1) for BGP to enable automatic route-target filtering. |
1.3.6.1.4.1.4874.2.2.29.1.1.29 | juniBgpDefaultIPv4Unicast, usdBgpDefaultIPv4Unicast | 1 | 1 | Set this object to true(1) for BGP to automatically activate peers in the IPv4 unicast address family. |
1.3.6.1.4.1.4874.2.2.29.1.1.30 | juniBgpRedistributeInternal, usdBgpRedistributeInternal | 1 | 1 | Set this object to true(1) for BGP to automatically redistribute iBGP routes to IGP protocols. |
1.3.6.1.4.1.4874.2.2.29.1.1.31 | juniBgpFourOctetLocalAsNumber | 1 | 1 | The four-octet local autonomous system number. This attribute replaces the old two-octet local autonomous system number. |
1.3.6.1.4.1.4874.2.2.29.1.1.32 | juniBgpConfederationPeersFilterList | 1 | 1 | The confederation peers filter-list contains the name of an as-path access-list. Every neighbor whose remote-AS number matches … |
1.3.6.1.4.1.4874.2.2.29.1.1.33 | juniBgpUnconfiguredAttributes, usdBgpUnconfiguredAttributes | 1 | 1 | On get each bit indicates whether the corresponding attribute is configured or unconfigured: 0 = The attribute is configured (i.e… |
1.3.6.1.4.1.4874.2.2.29.1.1.34 | juniBgpAdvertiseBestExternalToInternal | 1 | 1 | If this object is set to true(1) then BGP advertises the best route received from external (and confederation) peers to internal… |
1.3.6.1.4.1.4874.2.2.29.1.1.35 | juniBgpGracefulRestartEnabled | 1 | 1 | Set this object to true(1) to enable BGP graceful restart. |
1.3.6.1.4.1.4874.2.2.29.1.1.36 | juniBgpGracefulRestartRestartTime | 1 | 1 | The restart-time advertised in graceful-restart capabilities sent to all peers. This is the estimated time (in seconds) it will … |
1.3.6.1.4.1.4874.2.2.29.1.1.37 | juniBgpGracefulRestartStalePathsTime | 1 | 1 | The maximum amount of time in seconds we keep stale routes after a session goes down. This value is used for all peers unless it… |
1.3.6.1.4.1.4874.2.2.29.1.1.38 | juniBgpGracefulRestartPathSelectionDeferTimeLimit | 1 | 1 | The maximum amount of time in seconds route selection is deferred after a restart. |
1.3.6.1.4.1.4874.2.2.29.1.1.39 | juniBgpPlatformSupportsNonStopForwarding | 1 | 1 | Does this platform support non-stop forwarding? |
1.3.6.1.4.1.4874.2.2.29.1.1.40 | juniBgpDeviceCanPreserveForwardingState | 1 | 1 | Is this router at this moment able to do a graceful restart (i.e. is it able to switch over from the primary controller to the s… |
1.3.6.1.4.1.4874.2.2.29.1.1.41 | juniBgpLastRestartWasGraceful | 1 | 1 | Was the most recent restart graceful? (i.e. was forwarding state preserved on the line cards during the most recent switch-over f… |