Vendor: Juniper Networks/Unisphere
Module: Juniper-L2TP-MIB
[Automatically extracted from oidview.com]
usdL2tpSystemConfig OBJECT IDENTIFIER ::= { usdL2tpSystem 1 }
juniL2tpSystemConfig OBJECT IDENTIFIER ::= { juniL2tpSystem 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.35.1.1.1.1 | juniL2tpSysConfigAdminState, usdL2tpSysConfigAdminState | 1 | 1 | Exerts control over all L2TP tunnels/sessions in the system. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.2 | juniL2tpSysConfigDestructTimeout, usdL2tpSysConfigDestructTimeout | 1 | 1 | The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.3 | juniL2tpSysConfigIpChecksumEnable, usdL2tpSysConfigIpChecksumEnable | 1 | 1 | Enable/disable IP checksumming for tunnels with UDP/IP transport. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.4 | juniL2tpSysConfigTunnelSwitchingEnabled, usdL2tpSysConfigTunnelSwitchingEnabled | 1 | 1 | Tunnel switching enabled/disable. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.5 | juniL2tpSysConfigControlRetransmissions, usdL2tpSysConfigControlRetransmissions | 1 | 1 | The number of retransmission retries allowed before control session goes down. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.6 | juniL2tpSysConfigTunnelIdleTimeout, usdL2tpSysConfigTunnelIdleTimeout | 1 | 1 | Idle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.7 | juniL2tpSysConfigReceiveDataSequencingIgnore, usdL2tpSysConfigReceiveDataSequencingIgnore | 1 | 1 | Enable/disable ignoring of receive sequencing of L2TP data packets. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.8 | juniL2tpSysConfigFailoverWithinPreference | 1 | 1 | Enable/disable fail-over within a preference level. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.9 | juniL2tpSysConfigWeightedLoadBalancing | 1 | 1 | Enable/disable weighted load balancing. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.10 | juniL2tpSysConfigControlRetransmissionsEstablished | 1 | 1 | It represents number of retries allowed for established tunnels before control connection goes down. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.11 | juniL2tpSysConfigControlRetransmissionsNotEstablished | 1 | 1 | It represents number of retries allowed for unestablished tunnels before control connection goes down. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.12 | juniL2tpSysConfigDisableChallenge | 1 | 1 | Disable inclusion of chap challenge in the outgoing packets. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.13 | juniL2tpSysConfigDisableCallingNumberAvp | 1 | 1 | Enable/disable inclusion of calling number avp in ICRQ packet. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.14 | juniL2tpSysConfigIgnoreTxAddressChange | 1 | 1 | Configure L2TP to ignore IP address and/or UDP port changes on incoming SCCRP messages. When this feature is enabled the L2TP tu… |
1.3.6.1.4.1.4874.2.2.35.1.1.1.15 | juniL2tpSysConfigEnableDisconnectCauseAvp | 1 | 1 | Enable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN packet. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.16 | juniL2tpSysConfigReceiveWindowSize | 1 | 1 | Configure the global L2TP receive window size. A value of 0 indicates the system chooses the RWS. This object may be overwritte… |
1.3.6.1.4.1.4874.2.2.35.1.1.1.17 | juniL2tpSysConfigEnableRxSpeedAvpWhenEqual | 1 | 1 | Enable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the R… |
1.3.6.1.4.1.4874.2.2.35.1.1.1.18 | juniL2tpSysConfigRejectTxAddressChange | 1 | 1 | Configure L2TP to reject IP address and/or UDP port changes on incomming SCCRP messages. disable(0) - address change is allowed ip… |
1.3.6.1.4.1.4874.2.2.35.1.1.1.19 | juniL2tpSysConfigShortDrainTimeout | 1 | 1 | Configure the L2TP short drain interval. This interval represents the time a tunnel, that is already draining, will continue to… |
1.3.6.1.4.1.4874.2.2.35.1.1.1.20 | juniL2tpSysConfigDestinationLockoutTestEnabled | 1 | 1 | Enable/disable testing of failed destiantion before removing lockout. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.21 | juniL2tpSysConfigDestinationLockoutTimeout | 1 | 1 | Failed destination remains locked out for the specified amount of time. |
1.3.6.1.4.1.4874.2.2.35.1.1.1.22 | juniL2tpSysConfigFailoverResync | 1 | 1 | Configure L2TP failover resync mechanism. disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Proto… |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.35.1.1.2 | juniL2tpSystemStatus, usdL2tpSystemStatus | 17 | 34 | None |