Enable/disable generation of L2TP RX speed AVP when RX and TX speeds
are equal. Note the RX speed is always generated when the
RX and TX speeds differ.
Parsed from file juniL2tp.mi2.txt
Company: None
Module: Juniper-L2TP-MIB
Enable/disable generation of L2TP RX speed AVP when RX and TX speeds
are equal. Note the RX speed is always generated when the
RX and TX speeds differ.
Parsed from file Juniper-L2TP-MIB.mib
Module: Juniper-L2TP-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-L2TP-MIB
[Automatically extracted from oidview.com]
juniL2tpSysConfigEnableRxSpeedAvpWhenEqual OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the RX and TX speeds differ." DEFVAL { disable } ::= { juniL2tpSystemConfig 17 }
juniL2tpSysConfigEnableRxSpeedAvpWhenEqual OBJECT-TYPE SYNTAX JuniEnable MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/disable generation of L2TP RX speed AVP when RX and TX speeds are equal. Note the RX speed is always generated when the RX and TX speeds differ." DEFVAL { disable } ::= { juniL2tpSystemConfig 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.17.0 | juniL2tpSysConfigEnableRxSpeedAvpWhenEqual | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.1 | juniL2tpSysConfigAdminState, usdL2tpSysConfigAdminState | 1 | 1 | Exerts control over all L2TP tunnels/sessions in the system. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.2 | juniL2tpSysConfigDestructTimeout, usdL2tpSysConfigDestructTimeout | 1 | 1 | The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.3 | juniL2tpSysConfigIpChecksumEnable, usdL2tpSysConfigIpChecksumEnable | 1 | 1 | Enable/disable IP checksumming for tunnels with UDP/IP transport. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.4 | juniL2tpSysConfigTunnelSwitchingEnabled, usdL2tpSysConfigTunnelSwitchingEnabled | 1 | 1 | Tunnel switching enabled/disable. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.5 | juniL2tpSysConfigControlRetransmissions, usdL2tpSysConfigControlRetransmissions | 1 | 1 | The number of retransmission retries allowed before control session goes down. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.6 | juniL2tpSysConfigTunnelIdleTimeout, usdL2tpSysConfigTunnelIdleTimeout | 1 | 1 | Idle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.7 | juniL2tpSysConfigReceiveDataSequencingIgnore, usdL2tpSysConfigReceiveDataSequencingIgnore | 1 | 1 | Enable/disable ignoring of receive sequencing of L2TP data packets. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.8 | juniL2tpSysConfigFailoverWithinPreference | 1 | 1 | Enable/disable fail-over within a preference level. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.9 | juniL2tpSysConfigWeightedLoadBalancing | 1 | 1 | Enable/disable weighted load balancing. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.10 | juniL2tpSysConfigControlRetransmissionsEstablished | 1 | 1 | It represents number of retries allowed for established tunnels before control connection goes down. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.11 | juniL2tpSysConfigControlRetransmissionsNotEstablished | 1 | 1 | It represents number of retries allowed for unestablished tunnels before control connection goes down. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.12 | juniL2tpSysConfigDisableChallenge | 1 | 1 | Disable inclusion of chap challenge in the outgoing packets. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.13 | juniL2tpSysConfigDisableCallingNumberAvp | 1 | 1 | Enable/disable inclusion of calling number avp in ICRQ packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.14 | juniL2tpSysConfigIgnoreTxAddressChange | 1 | 1 | Configure L2TP to ignore IP address and/or UDP port changes on incoming SCCRP messages. When this feature is enabled the L2TP tu… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.15 | juniL2tpSysConfigEnableDisconnectCauseAvp | 1 | 1 | Enable/disable inclusion of L2TP PPP Disconnect Cause AVP in CDN packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.16 | juniL2tpSysConfigReceiveWindowSize | 1 | 1 | Configure the global L2TP receive window size. A value of 0 indicates the system chooses the RWS. This object may be overwritte… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.18 | juniL2tpSysConfigRejectTxAddressChange | 1 | 1 | Configure L2TP to reject IP address and/or UDP port changes on incomming SCCRP messages. disable(0) - address change is allowed ip… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.19 | juniL2tpSysConfigShortDrainTimeout | 1 | 1 | Configure the L2TP short drain interval. This interval represents the time a tunnel, that is already draining, will continue to… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.20 | juniL2tpSysConfigDestinationLockoutTestEnabled | 1 | 1 | Enable/disable testing of failed destiantion before removing lockout. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.21 | juniL2tpSysConfigDestinationLockoutTimeout | 1 | 1 | Failed destination remains locked out for the specified amount of time. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.22 | juniL2tpSysConfigFailoverResync | 1 | 1 | Configure L2TP failover resync mechanism. disable(0) - Disable failover resync failoverProtocol(1) - Use the L2TP Failover Proto… |