LDP is used for label distributions control for setting up the LSPs.
Topology driven LSPs also setup using LDP label distribution control.
This object allows to enable/disable LDP admin state used for
topology driven LSPs setup.
Parsed from file usDataMpls.mi2.txt
Company: None
Module: Unisphere-Data-MPLS-MIB
LDP is used for label distributions control for setting up the LSPs.
Topology driven LSPs also setup using LDP label distribution control.
This object allows to enable/disable LDP admin state used for
topology driven LSPs setup.
Parsed from file Juniper-MPLS-MIB.mib
Module: Juniper-MPLS-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-MPLS-MIB
[Automatically extracted from oidview.com]
usdMplsGroupTopologyDrivenLdp OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "LDP is used for label distributions control for setting up the LSPs. Topology driven LSPs also setup using LDP label distribution control. This object allows to enable/disable LDP admin state used for topology driven LSPs setup." DEFVAL { disable } ::= { usdMplsGroup 24 }
juniMplsGroupTopologyDrivenLdp OBJECT-TYPE SYNTAX INTEGER { disable(0), enable(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "LDP is used for label distributions control for setting up the LSPs. Topology driven LSPs also setup using LDP label distribution control. This object allows to enable/disable LDP admin state used for topology driven LSPs setup." DEFVAL { disable } ::= { juniMplsGroup 24 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.54.1.1.1.24.0 | juniMplsGroupTopologyDrivenLdp | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.4874.2.2.54.1.1.1.1 | juniMplsGroupMplsEnable, usdMplsGroupMplsEnable | 1 | 1 | Enables or disables MPLS on the virtual router. When MPLS is created on the virtual router (VR), it remains adminstratively dis… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.2 | juniMplsGroupReopTimer, usdMplsGroupReopTimer | 1 | 1 | All LSPs setup in MPLS domain are reoptimized for better LSPs as and when available. This object allows configuration of the fr… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.3 | juniMplsGroupLabelRangeLow, usdMplsGroupLabelRangeLow | 1 | 1 | The lower end of the range of the platform label space from which the interfaces on a given LSR derive their label space. Ether… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.4 | juniMplsGroupLabelRangeHigh, usdMplsGroupLabelRangeHigh | 1 | 1 | The higher end of the range of the platform label space from which the interfaces on a given LSR derive their label space. Ethe… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.5 | juniMplsGroupLspRetryTimesNoroute, usdMplsGroupLspRetryTimesNoroute | 1 | 1 | This object configures the number of retries for LSP setup after a failure due to no available route. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.6 | juniMplsGroupLspRetryIntervalNoroute, usdMplsGroupLspRetryIntervalNoroute | 1 | 1 | This object configures the time interval between two successive LSP setup retries after a failure due to no available route. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.7 | juniMplsGroupLspRetryTimes, usdMplsGroupLspRetryTimes | 1 | 1 | Use this object to configure number of retries for LSP setup after a failure other than one due to no available route. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.8 | juniMplsGroupLspRetryInterval, usdMplsGroupLspRetryInterval | 1 | 1 | Use this object to configure the time interval between two LSP setup retries after a failure other than one due to no available … |
1.3.6.1.4.1.4874.2.2.54.1.1.1.9 | juniMplsGroupLdpRetryTimesNoroute, usdMplsGroupLdpRetryTimesNoroute | 1 | 1 | Use this object to configure the number of retries for LDP to setup LSP after a failure due to no available route. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.10 | juniMplsGroupLdpRetryIntervalNoroute, usdMplsGroupLdpRetryIntervalNoroute | 1 | 1 | Use this object to configure the time interval between two successive LSP setup retries by LDP after a failure due to no availab… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.11 | juniMplsGroupLdpRetryTimes, usdMplsGroupLdpRetryTimes | 1 | 1 | Use this object to configure LSP setup retries by LDP after a failure other than one due to no available route. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.12 | juniMplsGroupLdpRetryInterval, usdMplsGroupLdpRetryInterval | 1 | 1 | Use this object to configure time interval between two LSP setup retries by LDP after a failure other than one due to no availab… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.13 | juniMplsGroupLdpSessionRetries, usdMplsGroupLdpSessionRetries | 1 | 1 | Use this object to configure the number of LDP session retries. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.14 | juniMplsGroupLdpSessionRetryTimer, usdMplsGroupLdpSessionRetryTimer | 1 | 1 | Use this object to configure the time interval between two LDP session retries. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.15 | juniMplsGroupTopologyDrivenIpProfileName, usdMplsGroupTopologyDrivenIpProfileName | 1 | 1 | Usually IP interfaces are stacked on top of the MPLS tunnels. The profiled tunnels are associated with IP interfaces with profi… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.16 | juniMplsGroupTopologyDrivenLdpEgressIpIntf, usdMplsGroupTopologyDrivenLdpEgressIpIntf | 1 | 1 | This object allows enabling/disabling of IP interfaces created over egress LSPs setup by topology driven LSP setup configuration… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.17 | juniMplsGroupTopologyDrivenLdpIngressIpIntf, usdMplsGroupTopologyDrivenLdpIngressIpIntf | 1 | 1 | This object allows enabling/disabling of IP interfaces created over ingress LSPs setup by topology driven LSP setup configuratio… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.18 | juniMplsGroupTopologyDrivenLdpEgressIpIntfHostOnly, usdMplsGroupTopologyDrivenLdpEgressIpIntfHostOnly | 1 | 1 | This object allows enabling/disabling of IP interfaces created over egress LSPs to host only IP addresses setup by topology driv… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.19 | juniMplsGroupTopologyDrivenLdpIngressIpIntfHostOnly, usdMplsGroupTopologyDrivenLdpIngressIpIntfHostOnly | 1 | 1 | This object allows enabling/disabling of IP interfaces created over ingress LSPs to host only IP addresses setup by topology dri… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.20 | juniMplsGroupTopologyDrivenLdpEgressIpIntfPolicyListType, usdMplsGroupTopologyDrivenLdpEgressIpIntfPolicyListType | 1 | 1 | There are two types of policy list type defined for the locally defined labels advertisement to neighbors; viz. accessList and p… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.21 | juniMplsGroupTopologyDrivenLdpIngressIpIntfPolicyListType, usdMplsGroupTopologyDrivenLdpIngressIpIntfPolicyListType | 1 | 1 | There are two types of policy list type defined for the locally defined labels advertisement to neighbors; viz. accessList and p… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.22 | juniMplsGroupTopologyDrivenLdpEgressIpIntfPolicyList, usdMplsGroupTopologyDrivenLdpEgressIpIntfPolicyList | 1 | 1 | This object used to configure egress list name of topology driven LSPs over IP interfaces. For successful configurations the eg… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.23 | juniMplsGroupTopologyDrivenLdpIngressIpIntfPolicyList, usdMplsGroupTopologyDrivenLdpIngressIpIntfPolicyList | 1 | 1 | This object used to configure ingress list name of topology driven LSPs over IP interfaces. For successful configurations ingre… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.25 | juniMplsGroupLspLabelDistCtrlMode, usdMplsGroupLspLabelDistCtrlMode | 1 | 1 | Some FECs correspond to address prefixes which are distributed via a dynamic routing algorithm. The setup of the LSPs for these… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.26 | juniMplsGroupLdpAdvHostOnly, usdMplsGroupLdpAdvHostOnly | 1 | 1 | This object allows to enable/disable LDP label advertisement mode for host only LSPs. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.27 | juniMplsGroupLsrState, usdMplsGroupLsrState | 1 | 1 | This object value displays the status of MPLS enabled LSR such as state is up or down etc. |
1.3.6.1.4.1.4874.2.2.54.1.1.1.28 | juniMplsGroupReopNow, usdMplsGroupReopNow | 1 | 1 | All LSPs setup in MPLS domain are reoptimized for better LSPs as and when available. Setting this object forces an immediate ch… |
1.3.6.1.4.1.4874.2.2.54.1.1.1.29 | juniMplsGroupIpTtlPropagate | 1 | 1 | Indicate the IP TTL propagation status on ingress LSPs. none - Not set to anything. hideForwardedAndLocal - Hide… |