Displays the estimated offset error of the system clock relative to the
master clock in seconds. This variable can take on both positive and
negative values; the value will be positive if the system clock is ahead
of the master clock; the value will be negative if the system clock is
behind the master clock. This offset value will be used by the internal
NTP filter algorithm to adjust the system clock to correct any error it
may have.
This object has been deprecated in favor of the
juniNtpSysClockOffsetErrorNew object, which uses DisplayString for its
SYNTAX.
Parsed from file juniSystemClock.mi2.txt
Company: None
Module: Juniper-System-Clock-MIB
Displays the estimated offset error of the system clock relative to the
master clock in seconds. This variable can take on both positive and
negative values; the value will be positive if the system clock is ahead
of the master clock; the value will be negative if the system clock is
behind the master clock. This offset value will be used by internal the
NTP filter algorithm to adjust the system clock to correct its error.
Parsed from file Unisphere-Data-System-Clock-MIB.mib
Module: Unisphere-Data-System-Clock-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-System-Clock-MIB
[Automatically extracted from oidview.com]
juniNtpSysClockOffsetError OBJECT-TYPE SYNTAX JuniNtpClockSignedTime UNITS "seconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Displays the estimated offset error of the system clock relative to the master clock in seconds. This variable can take on both positive and negative values; the value will be positive if the system clock is ahead of the master clock; the value will be negative if the system clock is behind the master clock. This offset value will be used by the internal NTP filter algorithm to adjust the system clock to correct any error it may have. This object has been deprecated in favor of the juniNtpSysClockOffsetErrorNew object, which uses DisplayString for its SYNTAX." REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" ::= { juniNtpSysClock 2 }
usdNtpSysClockOffsetError OBJECT-TYPE SYNTAX UsdNtpClockSignedTime UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the estimated offset error of the system clock relative to the master clock in seconds. This variable can take on both positive and negative values; the value will be positive if the system clock is ahead of the master clock; the value will be negative if the system clock is behind the master clock. This offset value will be used by internal the NTP filter algorithm to adjust the system clock to correct its error." REFERENCE "D.L. Mills, 'Network Time Protocol (Version 3)', RFC-1305, March 1992" ::= { usdNtpSysClock 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.56.2.1.2.0 | juniNtpSysClockOffsetError | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.56.2.1.1 | juniNtpSysClockState, usdNtpSysClockState | 1 | 1 | Displays the state of the NTP on the system clock. Clock states are: 0 - Clock has never been calibrated for frequency errors 1 … |
| 1.3.6.1.4.1.4874.2.2.56.2.1.3 | juniNtpSysClockFrequencyError, usdNtpSysClockFrequencyError | 1 | 1 | Displays the system clock frequency error in parts per million (ppm). It will always be a positive value. This error adjustment… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.4 | juniNtpSysClockRootDelay, usdNtpSysClockRootDelay | 1 | 1 | This indicates the NTP time message total Network roundtrip delay to the primary reference source at the root of the synchroniza… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.5 | juniNtpSysClockRootDispersion, usdNtpSysClockRootDispersion | 1 | 1 | This indicates the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds.… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.6 | juniNtpSysClockStratumNumber, usdNtpSysClockStratumNumber | 1 | 1 | Displays the stratum number of the system clock. 1 - primary reference (e.g. calibrated atomic clock, radio clock) 2-255 - seco… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.7 | juniNtpSysClockLastUpdateTime, usdNtpSysClockLastUpdateTime | 1 | 1 | Displays the time of the system clock at the time when it was last updated by any associated NTP server(peer). |
| 1.3.6.1.4.1.4874.2.2.56.2.1.8 | juniNtpSysClockLastUpdateServer, usdNtpSysClockLastUpdateServer | 1 | 1 | Displays the IP address of the NTP server (peer) which done last update to the system clock. |
| 1.3.6.1.4.1.4874.2.2.56.2.1.9 | juniNtpSysClockOffsetErrorNew | 1 | 1 | Displays the estimated offset error of the system clock relative to the master clock in seconds. This variable can take on both… |
| 1.3.6.1.4.1.4874.2.2.56.2.1.10 | juniNtpSysClockFrequencyErrorNew | 1 | 1 | Displays the system clock frequency error in parts per million (ppm). It will always be a positive value. This error adjustment… |