Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value will recognize both VC Mux and LLC
formats. The 'aal5' and 'aal0' values are used for encapsulation
methods for transport of ATM frames and cells over IP and MPLS networks
when no encapsulation method is specified.
Parsed from file juniAtm.mi2.txt
Company: None
Module: Juniper-UNI-ATM-MIB
Specifies the encapsulation used by the circuit to carry IP datagrams.
Encapsulations are as specified in RFC1483 Multiprotocol Interconnect
over ATM. The 'autoconfig' value will recognize both VC Mux and LLC
formats. The 'aal5' and 'aal0' values are used for encapsulation
methods for transport of ATM frames and cells over IP and MPLS networks
when no encapsulation method is specified.
Parsed from file Juniper-UNI-ATM-MIB.mib
Module: Juniper-UNI-ATM-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-UNI-ATM-MIB
[Automatically extracted from oidview.com]
juniAtmVcClassVccType OBJECT-TYPE SYNTAX INTEGER { rfc1483VcMux(0), rfc1483Llc(1), autoconfig(2), aal5(3), aal0(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. The 'autoconfig' value will recognize both VC Mux and LLC formats. The 'aal5' and 'aal0' values are used for encapsulation methods for transport of ATM frames and cells over IP and MPLS networks when no encapsulation method is specified." DEFVAL { rfc1483VcMux } ::= { juniAtmVcClassEntry 2 }
juniAtmVcClassVccType OBJECT-TYPE SYNTAX INTEGER { rfc1483VcMux(0), rfc1483Llc(1), autoconfig(2), aal5(3), aal0(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. The 'autoconfig' value will recognize both VC Mux and LLC formats. The 'aal5' and 'aal0' values are used for encapsulation methods for transport of ATM frames and cells over IP and MPLS networks when no encapsulation method is specified." DEFVAL { rfc1483VcMux } ::= { juniAtmVcClassEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 | juniAtmVcClassId | 0 | 0 | The integer identifier associated with this ATM VC class. A value for this identifier is determined by locating or creating an … |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3 | juniAtmVcClassVccServiceCategory | 0 | 0 | Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cel… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4 | juniAtmVcClassVccPcr | 0 | 0 | Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServiceCat… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5 | juniAtmVcClassVccScr | 0 | 0 | Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServi… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6 | juniAtmVcClassVccMbs | 0 | 0 | Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configure… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7 | juniAtmVcClassVccOamAdminStatus | 0 | 0 | The OAM VC integrity administrative state of the ATM VC associated with this class. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.8 | juniAtmVcClassVccOamLoopbackFrequency | 0 | 0 | The OAM loopback frequency in seconds. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9 | juniAtmVcClassVccOamUpCount | 0 | 0 | Specifies the number of successive loopback cell responses to receive before the ATM VC associated with this class is declared up… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10 | juniAtmVcClassVccOamDownCount | 0 | 0 | Specifies the number of successive loopback cell responses not received before declaring the ATM VC associated with this class as… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11 | juniAtmVcClassVccOamRetryFrequency | 0 | 0 | Specifies the frequency (in seconds) to transmit loopback cells when verifying the ATM VC operational state associated with this… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12 | juniAtmVcClassVccOamAlarmDownCount | 0 | 0 | Specifies the number of successive alarm (AIS or RDI) cells to receive before declaring the ATM VC associated with class as down. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13 | juniAtmVcClassVccOamAlarmClearTimeout | 0 | 0 | Specifies how long to wait (in seconds) before declaring the ATM VC associated with class as up after it has stopped receiving a… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14 | juniAtmVcClassVccInverseArp | 0 | 0 | Enables the inverse ARP protocol on the ATM VC associated with this class; true(1) enables the protocol, false(2) disables it. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15 | juniAtmVcClassVccInverseArpRefresh | 0 | 0 | The refresh rate in minutes between inverse ARP protocol messages. |