The OAM loopback frequency in seconds.
Parsed from file juniAtm.mi2.txt
Company: None
Module: Juniper-UNI-ATM-MIB
The OAM loopback frequency in seconds.
Parsed from file Juniper-UNI-ATM-MIB.mib
Module: Juniper-UNI-ATM-MIB
Vendor: Juniper Networks/Unisphere
Module: Juniper-UNI-ATM-MIB
[Automatically extracted from oidview.com]
juniAtmVcClassVccOamLoopbackFrequency OBJECT-TYPE SYNTAX Integer32 (1..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The OAM loopback frequency in seconds." DEFVAL { 10 } ::= { juniAtmVcClassEntry 8 }
juniAtmVcClassVccOamLoopbackFrequency OBJECT-TYPE SYNTAX Integer32 (1..600) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The OAM loopback frequency in seconds." DEFVAL { 10 } ::= { juniAtmVcClassEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.1 | juniAtmVcClassId | 0 | 0 | The integer identifier associated with this ATM VC class. A value for this identifier is determined by locating or creating an … |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.2 | juniAtmVcClassVccType | 0 | 0 | Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol … |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.3 | juniAtmVcClassVccServiceCategory | 0 | 0 | Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cel… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.4 | juniAtmVcClassVccPcr | 0 | 0 | Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServiceCat… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.5 | juniAtmVcClassVccScr | 0 | 0 | Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when juniAtmVcClassVccServi… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.6 | juniAtmVcClassVccMbs | 0 | 0 | Maximum Burst Size, in cells, of this circuit. This parameter is only required when juniAtmVcClassVccServiceCategory is configure… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.7 | juniAtmVcClassVccOamAdminStatus | 0 | 0 | The OAM VC integrity administrative state of the ATM VC associated with this class. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.9 | juniAtmVcClassVccOamUpCount | 0 | 0 | Specifies the number of successive loopback cell responses to receive before the ATM VC associated with this class is declared up… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.10 | juniAtmVcClassVccOamDownCount | 0 | 0 | Specifies the number of successive loopback cell responses not received before declaring the ATM VC associated with this class as… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.11 | juniAtmVcClassVccOamRetryFrequency | 0 | 0 | Specifies the frequency (in seconds) to transmit loopback cells when verifying the ATM VC operational state associated with this… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.12 | juniAtmVcClassVccOamAlarmDownCount | 0 | 0 | Specifies the number of successive alarm (AIS or RDI) cells to receive before declaring the ATM VC associated with class as down. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.13 | juniAtmVcClassVccOamAlarmClearTimeout | 0 | 0 | Specifies how long to wait (in seconds) before declaring the ATM VC associated with class as up after it has stopped receiving a… |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.14 | juniAtmVcClassVccInverseArp | 0 | 0 | Enables the inverse ARP protocol on the ATM VC associated with this class; true(1) enables the protocol, false(2) disables it. |
| 1.3.6.1.4.1.4874.2.2.8.1.7.3.1.15 | juniAtmVcClassVccInverseArpRefresh | 0 | 0 | The refresh rate in minutes between inverse ARP protocol messages. |