Turns the Generation ID Option off and on on this
interface.
Parsed from file MY-PIM-MIB.mib.txt
Company: ruijie
Module: MY-PIM-MIB
Vendor: Ruijie Networks
Module: MY-PIM-MIB (MY-PIM-MIB.mib)
Type: TABULAR
Access: read-write
Syntax: Integer32
Automatically extracted from www.mibdepot.com
myPimInterfaceGenerationID OBJECT-TYPE SYNTAX Integer32 { off (2), on (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Turns the Generation ID Option off and on on this interface." DEFVAL {off} ::= { myPimInterfaceEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.1 | myPimInterfaceIfIndex | 0 | 0 | The ifIndex value of this PIM interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.2 | myPimInterfaceAddress | 0 | 0 | The IP address of the PIM interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.3 | myPimInterfaceNetMask | 0 | 0 | The network mask for the IP address of the PIM interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.4 | myPimInterfaceMode | 0 | 0 | The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.5 | myPimInterfaceDR | 0 | 0 | The Designated Router on this PIM interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.6 | myPimInterfaceHelloInterval | 0 | 0 | The frequency at which PIM Hello messages are transmitted on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.7 | myPimInterfaceJoinPruneInterval | 0 | 0 | The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pi… |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.8 | myPimInterfaceCBSRPreference | 0 | 0 | The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local… |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.9 | myPimInterfaceTrigHelloInterval | 0 | 0 | The maximum time before a triggered PIM Hello message is transmitted on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.10 | myPimInterfaceHelloHoldtime | 0 | 0 | The value set in the Holdtime field of Hello messages transmitted on this interface. This should be 3.5 times the value of pimIn… |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.11 | myPimInterfaceLanPruneDelay | 0 | 0 | Turns the LAN Prune Delay Option off and on on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.12 | myPimInterfacePropagationDelay | 0 | 0 | The value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.13 | myPimInterfaceOverrideInterval | 0 | 0 | The value inserted into the Override Interval field of a LAN Prune Delay option on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.15 | myPimInterfaceJoinPruneHoldtime | 0 | 0 | The value inserted into the Holdtime field of a Join/ Prune message sent on this interface. The value should be 3.5 times pimInt… |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.16 | myPimInterfaceGraftRetryInterval | 0 | 0 | The interval a PIM router waits for a Graft Ack before resending a Graft on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.17 | myPimInterfaceMaxGraftRetries | 0 | 0 | The maximum number of times this router will resend a Graft on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.18 | myPimInterfaceSRTTLThreshold | 0 | 0 | The Time To Live in a PIM-DM Refresh message at which it is not forwarded on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.19 | myPimInterfaceLanDelayEnabled | 0 | 0 | Evaluates to TRUE if all routers on this interface are using the LAN Prune Delay Option. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.20 | myPimInterfaceSRCapable | 0 | 0 | Evaluates to TRUE if all routers on this interface are using the State Refresh Capable Option. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.21 | myPimInterfaceDRPriority | 0 | 0 | The Designater Router Priority inserted into the DR priority option on this interface. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.22 | myPimInterfaceNbrCounter | 0 | 0 | The number of interface's neighbour. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.23 | myPimInterfaceBsrBorderEnabled | 0 | 0 | Enabled means Define a PIM bootstrap message boundary for the PIM domain,use disabled to remove the PIM border. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.24 | myPimInterfaceCountIn | 0 | 0 | Number of packets into the interface since the router has been up. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.25 | myPimInterfaceCountOut | 0 | 0 | Number of packets out of the interface since the router has been up. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.26 | myPimInterfaceEnabled | 0 | 0 | use the ip pim command in interface configuration mode. To disable PIM on the interface, use the no form of this command. |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.27 | myPimNeighborFilterAcl | 0 | 0 | The name of the neighbor filter address list,which limits the scope of the neighbor,The default value means all neighbors will b… |
| 1.3.6.1.4.1.4881.1.1.10.2.27.1.1.2.1.28 | myPimDrSupportAddressBound | 0 | 0 | The name of the DR support address list,which limits the scope of the souce address ,this will be only used when the interface … |