The compatibility mode as indicated by this trunk's
dip switches. This only applies to fiber trunks.
Parsed from file chipcom-emm.mib.txt
Company: None
Module: ChpCom-EMM
The compatibility mode as indicated by this trunk's
dip switches. This only applies to fiber trunks.
Parsed from file CHIPCOMMIB.mib
Module: CHIPCOMMIB
Vendor: Chippcom
Module: CHIPCOMMIB
[Automatically extracted from oidview.com]
ol52nnMFRTrunkDipCompMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), notApplicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The compatibility mode as indicated by this trunk's dip switches. This only applies to fiber trunks." ::= { ol52nnMFRTrunkEntry 7 }
ol52nnMFRTrunkDipCompMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), notApplicable(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The compatibility mode as indicated by this trunk's dip switches. This only applies to fiber trunks." ::= { ol52nnMFRTrunkEntry 7 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.1 | ol52nnMFRTrunkSlotIndex | 0 | 0 | A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a … |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.2 | ol52nnMFRTrunkIndex | 0 | 0 | The trunk number of this trunk. |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.3 | ol52nnMFRTrunkDipAdminState | 0 | 0 | The state of this trunk as indicated by the trunk's dip switches. |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.4 | ol52nnMFRTrunkCableMon | 0 | 0 | The cable monitor configuration for this trunk. This does not apply to fiber trunks. |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.5 | ol52nnMFRTrunkDipCableMon | 0 | 0 | The cable monitor configuration as indicated by this trunk's dip switches. This does not apply to fiber trunks. |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.6 | ol52nnMFRTrunkCompMode | 0 | 0 | The compatibility mode for this trunk. This only applies to fiber trunks. |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.8 | ol52nnMFRTrunkNetMapState | 0 | 0 | The map state of the copper ring-in trunk. This should be set to external for ring-in trunks which connect to external hubs. Th… |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.9 | ol52nnMFRTrunkExtBcnRecovery | 0 | 0 | Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for tru… |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.10 | ol52nnMFRTrunkBuddySlot | 0 | 0 | The slot index of the redundant trunk's buddy. To set a trunk to be redundant, the buddy's slot must be set to a valid value. T… |
1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.11 | ol52nnMFRTrunkAdminState | 0 | 0 | The desired state of this trunk. Enabling a trunk allows the trunk to pass network traffic. This object may be used to configur… |