The map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.
Parsed from file chipcom-emm.mib.txt
Company: None
Module: ChpCom-EMM
The map state of the copper ring-in trunk. This
should be set to external for ring-in trunks which
connect to external hubs. The mapping logic will not
operate on trunks which are set to external. This
prevents incorrect mapping which can occur when a
module in one hub detects the mapping signal from
another hub. This attribute only applies to copper
ring-in trunks.
Parsed from file CHIPCOMMIB.mib
Module: CHIPCOMMIB
Vendor: Chippcom
Module: CHIPCOMMIB
[Automatically extracted from oidview.com]
ol52nnMFRTrunkNetMapState OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), internal(2), external(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The map state of the copper ring-in trunk. This should be set to external for ring-in trunks which connect to external hubs. The mapping logic will not operate on trunks which are set to external. This prevents incorrect mapping which can occur when a module in one hub detects the mapping signal from another hub. This attribute only applies to copper ring-in trunks." ::= { ol52nnMFRTrunkEntry 8 }
ol52nnMFRTrunkNetMapState OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), internal(2), external(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The map state of the copper ring-in trunk. This should be set to external for ring-in trunks which connect to external hubs. The mapping logic will not operate on trunks which are set to external. This prevents incorrect mapping which can occur when a module in one hub detects the mapping signal from another hub. This attribute only applies to copper ring-in trunks." ::= { ol52nnMFRTrunkEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.1 | ol52nnMFRTrunkSlotIndex | 0 | 0 | A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a … |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.2 | ol52nnMFRTrunkIndex | 0 | 0 | The trunk number of this trunk. |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.3 | ol52nnMFRTrunkDipAdminState | 0 | 0 | The state of this trunk as indicated by the trunk's dip switches. |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.4 | ol52nnMFRTrunkCableMon | 0 | 0 | The cable monitor configuration for this trunk. This does not apply to fiber trunks. |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.5 | ol52nnMFRTrunkDipCableMon | 0 | 0 | The cable monitor configuration as indicated by this trunk's dip switches. This does not apply to fiber trunks. |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.6 | ol52nnMFRTrunkCompMode | 0 | 0 | The compatibility mode for this trunk. This only applies to fiber trunks. |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.7 | ol52nnMFRTrunkDipCompMode | 0 | 0 | The compatibility mode as indicated by this trunk's dip switches. This only applies to fiber trunks. |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.9 | ol52nnMFRTrunkExtBcnRecovery | 0 | 0 | Indicates whether the trunk is connected to a segment that will perform beacon recovery. This should be set to exists(1) for tru… |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.10 | ol52nnMFRTrunkBuddySlot | 0 | 0 | The slot index of the redundant trunk's buddy. To set a trunk to be redundant, the buddy's slot must be set to a valid value. T… |
| 1.3.6.1.4.1.49.2.3.1.4.4.20.3.1.11 | ol52nnMFRTrunkAdminState | 0 | 0 | The desired state of this trunk. Enabling a trunk allows the trunk to pass network traffic. This object may be used to configur… |