The mastership priority of this agent. Ten is the
highest and one is the lowest. Priority is only
used when an election occurs. Mastership is not
preemptive unless the reset mastership command is used.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ol42nnMHModMasterPriority OBJECT-TYPE SYNTAX INTEGER { one(1), two(2), three(3), four(4), five(5), six(6), seven(7), eight(8), nine(9), ten(10) } ACCESS read-write STATUS mandatory DESCRIPTION "The mastership priority of this agent. Ten is the highest and one is the lowest. Priority is only used when an election occurs. Mastership is not preemptive unless the reset mastership command is used." ::= {ol42nnMHModEntry 11}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.1 | ol42nnMHModSlotIndex | 0 | 0 | A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a … |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.2 | ol42nnMHModHubId | 0 | 0 | Reading this value returns the same value as ol42nnMHModSlotIndex. Writing this value causes the module to be assigned a new Hub… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.3 | ol42nnMHModSerialNo | 0 | 0 | The serial number of this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.4 | ol42nnMHModRingSpeed | 0 | 0 | The ring's bandwidth. When olModNetwork for this module is not isolated(2), setting this value to a different ring speed will re… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.5 | ol42nnMHModBcnRecovery | 0 | 0 | When beacon recovery is enabled, the module will automatically recover from beaconing conditions by removing the beaconing statio… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.6 | ol42nnMHModRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.7 | ol42nnMHModRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.8 | ol42nnMHModBcnThresh | 0 | 0 | This object specifies a threshold used in beacon recovery. It is the number of times a port disabled by the beaconing algorithm i… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.9 | ol42nnMHModSpeedThresh | 0 | 0 | This object specifies a threshold used for speed detection. It is the number of times a port disabled due to detection of a wrong… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.10 | ol42nnMHModTRMediaType | 0 | 0 | The type this module's token ring media circuitry. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.12 | ol42nnMHModMasterStatus | 0 | 0 | The mastership status of this agent. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.13 | ol42nnMHModIpAddress | 0 | 0 | The current IP address of this module's token ring interface. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.14 | ol42nnMHModSubnetMask | 0 | 0 | The current subnet mask of this module's token ring interface. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.15 | ol42nnMHModDefaultGateway | 0 | 0 | The current default gateway of this module's token ring interface. Note that a value of 0.0.0.0 indicates that this interface is… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.16 | ol42nnMHModStationAddr | 0 | 0 | A 6 octet address burned-in (programmed at the factory) that uniquely identifies this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.17 | ol42nnMHModLocalMACAddress | 0 | 0 | A MAC address with the locally administered bit set to one. Setting this value to an invalid address will return invalidData erro… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.18 | ol42nnMHModMACAddressType | 0 | 0 | The desired MAC address for this agent. burned-in(1) indicates that the factory setting as defined in ol42nnMHModStationAddr sho… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.19 | ol42nnMHModActiveMACAddress | 0 | 0 | The actual MAC address that is being used by this agent. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.20 | ol42nnMHModManagementLevel | 0 | 0 | The level of management software installed. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.21 | ol42nnMHModOptionCardType | 0 | 0 | The type of option card installed, if any. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.22 | ol42nnMHModOptionCardMode | 0 | 0 | When an option card is installed, setting this attribute to isolated(2) causes the option card to be removed from the ring that p… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.23 | ol42nnMHModOptionCardSpeed | 0 | 0 | The ring's bandwidth. When ol42nnMHModOptionCardMode for this module is not isolated(2), setting this value to a different ring … |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.24 | ol42nnMHModOptionCardRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on the option card installed in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.25 | ol42nnMHModOptionCardRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on the option card installed in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.26 | ol42nnMHModFan1Status | 0 | 0 | The status of fan1 in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.27 | ol42nnMHModFan2Status | 0 | 0 | The status of fan2 in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.28 | ol42nnMHModTempStatus | 0 | 0 | The temperature status for this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.29 | ol42nnMHModBootVersion | 0 | 0 | The software version of the boot code running on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.30 | ol42nnMHModIfIndex | 0 | 0 | The interface number associated with this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.31 | ol42nnMHModPICStatus | 0 | 0 | The current status of this module's power interface controller board (PIC). |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.32 | ol42nnMHModPrimePowerStatus | 0 | 0 | The current status of this module's primary power supply. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.33 | ol42nnMHModBackupPowerStatus | 0 | 0 | The current status of this module's backup power supply. The status will be not-installed(4) when ol42nnMHModPICStatus is not-ins… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.34 | ol42nnMHModTRARPBroadcastType | 0 | 0 | The desired ARP broadcast type for this module. When this attribute is set to source-route(1), all ARP requests will contain the … |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.35 | ol42nnMHModRAMCfg | 0 | 0 | The amount of memory (in Megabytes) configured on this module. This includes the standard memory configuration, plus any amount i… |