The type of option card installed, if any.
Parsed from file isd_mib.txt
Company: a3com
Module: CHIPCOMMIB
Vendor: 3Com
Module: CHIPCOMMIB (isd_mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
ol42nnMHModOptionCardType OBJECT-TYPE SYNTAX INTEGER { fiber-riro(84), copper-riro(85), not-installed(255) } ACCESS read-only STATUS mandatory DESCRIPTION "The type of option card installed, if any." ::= {ol42nnMHModEntry 21}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.1 | ol42nnMHModSlotIndex | 0 | 0 | A unique value that identifies a particular module. Its value ranges between 1 and olModSlotNumber. The module identified by a … |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.2 | ol42nnMHModHubId | 0 | 0 | Reading this value returns the same value as ol42nnMHModSlotIndex. Writing this value causes the module to be assigned a new Hub… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.3 | ol42nnMHModSerialNo | 0 | 0 | The serial number of this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.4 | ol42nnMHModRingSpeed | 0 | 0 | The ring's bandwidth. When olModNetwork for this module is not isolated(2), setting this value to a different ring speed will re… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.5 | ol42nnMHModBcnRecovery | 0 | 0 | When beacon recovery is enabled, the module will automatically recover from beaconing conditions by removing the beaconing statio… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.6 | ol42nnMHModRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.7 | ol42nnMHModRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.8 | ol42nnMHModBcnThresh | 0 | 0 | This object specifies a threshold used in beacon recovery. It is the number of times a port disabled by the beaconing algorithm i… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.9 | ol42nnMHModSpeedThresh | 0 | 0 | This object specifies a threshold used for speed detection. It is the number of times a port disabled due to detection of a wrong… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.10 | ol42nnMHModTRMediaType | 0 | 0 | The type this module's token ring media circuitry. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.11 | ol42nnMHModMasterPriority | 0 | 0 | The mastership priority of this agent. Ten is the highest and one is the lowest. Priority is only used when an election occurs. M… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.12 | ol42nnMHModMasterStatus | 0 | 0 | The mastership status of this agent. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.13 | ol42nnMHModIpAddress | 0 | 0 | The current IP address of this module's token ring interface. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.14 | ol42nnMHModSubnetMask | 0 | 0 | The current subnet mask of this module's token ring interface. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.15 | ol42nnMHModDefaultGateway | 0 | 0 | The current default gateway of this module's token ring interface. Note that a value of 0.0.0.0 indicates that this interface is… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.16 | ol42nnMHModStationAddr | 0 | 0 | A 6 octet address burned-in (programmed at the factory) that uniquely identifies this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.17 | ol42nnMHModLocalMACAddress | 0 | 0 | A MAC address with the locally administered bit set to one. Setting this value to an invalid address will return invalidData erro… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.18 | ol42nnMHModMACAddressType | 0 | 0 | The desired MAC address for this agent. burned-in(1) indicates that the factory setting as defined in ol42nnMHModStationAddr sho… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.19 | ol42nnMHModActiveMACAddress | 0 | 0 | The actual MAC address that is being used by this agent. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.20 | ol42nnMHModManagementLevel | 0 | 0 | The level of management software installed. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.22 | ol42nnMHModOptionCardMode | 0 | 0 | When an option card is installed, setting this attribute to isolated(2) causes the option card to be removed from the ring that p… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.23 | ol42nnMHModOptionCardSpeed | 0 | 0 | The ring's bandwidth. When ol42nnMHModOptionCardMode for this module is not isolated(2), setting this value to a different ring … |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.24 | ol42nnMHModOptionCardRecoveryAsic1 | 0 | 0 | A 6 octet address used by the first recovery ASIC on the option card installed in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.25 | ol42nnMHModOptionCardRecoveryAsic2 | 0 | 0 | A 6 octet address used by the second recovery ASIC on the option card installed in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.26 | ol42nnMHModFan1Status | 0 | 0 | The status of fan1 in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.27 | ol42nnMHModFan2Status | 0 | 0 | The status of fan2 in this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.28 | ol42nnMHModTempStatus | 0 | 0 | The temperature status for this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.29 | ol42nnMHModBootVersion | 0 | 0 | The software version of the boot code running on this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.30 | ol42nnMHModIfIndex | 0 | 0 | The interface number associated with this module. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.31 | ol42nnMHModPICStatus | 0 | 0 | The current status of this module's power interface controller board (PIC). |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.32 | ol42nnMHModPrimePowerStatus | 0 | 0 | The current status of this module's primary power supply. |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.33 | ol42nnMHModBackupPowerStatus | 0 | 0 | The current status of this module's backup power supply. The status will be not-installed(4) when ol42nnMHModPICStatus is not-ins… |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.34 | ol42nnMHModTRARPBroadcastType | 0 | 0 | The desired ARP broadcast type for this module. When this attribute is set to source-route(1), all ARP requests will contain the … |
| 1.3.6.1.4.1.49.2.3.1.4.4.69.1.1.35 | ol42nnMHModRAMCfg | 0 | 0 | The amount of memory (in Megabytes) configured on this module. This includes the standard memory configuration, plus any amount i… |