This selects the mode of operation of the spanning
tree protocol. When set to ibm-sr, spanning tree
protocol BPDUs are sent to the 802.5 LBS functional
address on all interface types, and TCN BPDUs are
not generated. When set to ieee8021d, TCN BPDUs are
generated, and the IEEE 802.1D group address
(01 80 C2 00 00 00 in canonical form) is used
as the destination address for BPDUs on interfaces
of types other than 802.5
Parsed from file MADGERSW-MIB.mib
Module: MADGERSW-MIB
Vendor: Madge Networks, Inc.
Module: MADGERSW-MIB
[Automatically extracted from oidview.com]
ringswitchBaseStpMode OBJECT-TYPE SYNTAX INTEGER { ibm-sr (1), ieee8021d (2) } ACCESS read-write STATUS mandatory DESCRIPTION "This selects the mode of operation of the spanning tree protocol. When set to ibm-sr, spanning tree protocol BPDUs are sent to the 802.5 LBS functional address on all interface types, and TCN BPDUs are not generated. When set to ieee8021d, TCN BPDUs are generated, and the IEEE 802.1D group address (01 80 C2 00 00 00 in canonical form) is used as the destination address for BPDUs on interfaces of types other than 802.5" ::= { ringswitchBase 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.494.4.1.1 | ringswitchBasePSFanSpeed | 1 | 1 | The number of revolutions per minute being reported by the fan internal to the system power supply. If this value is read as zero… |
| 1.3.6.1.4.1.494.4.1.2 | ringswitchBaseExtFanSpeed | 1 | 1 | The number of revolutions per minute being reported by the external system fan. If this value is read as zero, the fan is no long… |
| 1.3.6.1.4.1.494.4.1.3 | ringswitchBaseRipSapSuppression | 1 | 1 | If this variable is set to enable the system will only forward broadcast-addressed IPX RIP and SAP Response frames to those ports… |
| 1.3.6.1.4.1.494.4.1.4 | ringswitchBaseAREConversion | 1 | 1 | This variable controls the action taken when forwarding All Routes Explorer frames. enable-first: convert all ARE frames with a … |
| 1.3.6.1.4.1.494.4.1.6 | ringswitchBaseRMONState | 0 | 0 | Setting this to 'enable' activates the RMON probe function in the Ringswitch. When RMON has been enabled it is configured accordi… |
| 1.3.6.1.4.1.494.4.1.7 | ringswitchBaseBackPlaneType | 0 | 0 | This variable reports the type of chassis that the Ringswitch is mounted in. |
| 1.3.6.1.4.1.494.4.1.8 | ringswitchBaseRMONMirrorPort | 0 | 0 | This variable controls the RMON mirroring facility. A value of 0 means mirroring is disabled. Mirroring is enabled by setting thi… |
| 1.3.6.1.4.1.494.4.1.9 | ringswitchBaseTotalResetCounters | 0 | 0 | Use this variable to reset all the counters on the Ringswitch, including those in the ringswitchGenPort, dot1dSRPort, ifEntry and… |
| 1.3.6.1.4.1.494.4.1.10 | ringswitchBaseDownloadMode | 0 | 0 | Use this variable to select the mode for all subsequent download operations. normal - device will enter the loader prior to downlo… |