Determines the dialing method of the administrative FXS port. The dialing
method refers to the sound that occurs when the user enters each digit of
the dialing code.
Options:
dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
Default Value: dtmf (1)
Configuration Changed: administrative
Parsed from file CXMCVOX.MIB.txt
Company: None
Module: CXMCVOX-MIB
Determines the dialing method of the administrative FXS port. The dialing
method refers to the sound that occurs when the user enters each digit of
the dialing code.
Options:
dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to
identify the code the user dials. Tones are generated at a level of -7
plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3
dBm for the higher frequency group. The power level of the higher
frequency tone is intentionally increased to compensate for the higher
line loss.
pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone
frequency (2280Hz) to generate the codes the user enters. Tones are
generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number
of pulses during one second indicates the code the user dials. With the
E&M interface, the voice station generates and detects pulses.
Default Value: dtmf (1)
Configuration Changed: administrative
Parsed from file CXMCVOX-MIB.mib
Module: CXMCVOX-MIB
Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxFxsAdmDialType OBJECT-TYPE SYNTAX INTEGER { dtmf (1), pulse (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the dialing method of the administrative FXS port. The dialing method refers to the sound that occurs when the user enters each digit of the dialing code. Options: dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to identify the code the user dials. Tones are generated at a level of -7 plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3 dBm for the higher frequency group. The power level of the higher frequency tone is intentionally increased to compensate for the higher line loss. pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone frequency (2280Hz) to generate the codes the user enters. Tones are generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number of pulses during one second indicates the code the user dials. With the E&M interface, the voice station generates and detects pulses. Default Value: dtmf (1) Configuration Changed: administrative" DEFVAL { dtmf } ::= { cxMcVoxFxsAdmEntry 17 }
cxMcVoxFxsAdmDialType OBJECT-TYPE SYNTAX INTEGER { dtmf (1), pulse (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the dialing method of the administrative FXS port. The dialing method refers to the sound that occurs when the user enters each digit of the dialing code. Options: dtmf (1): (Dual Tone Multifrequence) uses bursts of frequency pairs to identify the code the user dials. Tones are generated at a level of -7 plus or minus 3 dBm for the lower frequency groups and -5 plus or minus 3 dBm for the higher frequency group. The power level of the higher frequency tone is intentionally increased to compensate for the higher line loss. pulse (2): uses bursts (10 plus or minus 0.5 pps) of the main tone frequency (2280Hz) to generate the codes the user enters. Tones are generated at a level of -4 to -30 dBm for the 2280Hz frequency. The number of pulses during one second indicates the code the user dials. With the E&M interface, the voice station generates and detects pulses. Default Value: dtmf (1) Configuration Changed: administrative" DEFVAL { dtmf } ::= { cxMcVoxFxsAdmEntry 17 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.1 | cxMcVoxFxsAdmCardUsed | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.2 | cxMcVoxFxsAdmPortUsed | 0 | 0 | Displays the number of the voice port. You cannot modify this object. Options: CX900: 1 is the only acceptable value. Each I/O car… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.3 | cxMcVoxFxsAdmPortStatus | 0 | 0 | Determines the functional status of the administrative port. Options: disable (1): port is not functional enable (2): port is up a… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.4 | cxMcVoxFxsAdmVocoder | 0 | 0 | Determines the transmission speed (in bits per second) of the compressed voice stream on the administrative FXS port. Defining t… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.5 | cxMcVoxFxsAdmFaxBw | 0 | 0 | Determines the speed (in bits per second) of the FAX channel on the administrative FXS port. This value also determines the band… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.6 | cxMcVoxFxsAdmAutoCnx | 0 | 0 | obsolete |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.7 | cxMcVoxFxsAdmPathId | 0 | 0 | Path IDs no longer exist with the new Voice Routing (VR) scheme. The Path ID is a numeric dialing code the user enters to gain a… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.8 | cxMcVoxFxsAdmTxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice transmissions on the administrative FXS port. The transmis… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.9 | cxMcVoxFxsAdmRxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice reception on the administrative FXS port. The reception ga… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.10 | cxMcVoxFxsAdmEchoCancel | 0 | 0 | Determines the state of echo cancellation on the administrative FXS port. When set to 'enable' at both the local and remote ends… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.11 | cxMcVoxFxsAdmSignaling | 0 | 0 | Determines the type of signalling the administrative FXS port uses to seize the line. Options: ground_start (1) loop_start (2) did (… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.12 | cxMcVoxFxsAdmTimeOn | 0 | 0 | obsolete |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.13 | cxMcVoxFxsAdmTimeOff | 0 | 0 | obsolete |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.14 | cxMcVoxFxsAdmCnctType | 0 | 0 | Determines the method the administrative FXS port uses to make connections. Options: switched (1): the port connects each call acc… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.15 | cxMcVoxFxsAdmRingType | 0 | 0 | Determines the ring type of the administrative FXS port. The ring types provide different ring timing to match the different rin… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.16 | cxMcVoxFxsAdmImpedance | 0 | 0 | Determines the input line impedance of the administrative FXS port. Options: i600_ohms (1) i900_ohms (2) att (3) aus (4) Default Value… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.18 | cxMcVoxFxsAdmDidSignalType | 0 | 0 | Note: This object only applies to those ports with the object cxMcVoxFxsAdmSignaling set to 'did'. Determines the type of signali… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.19 | cxMcVoxFxsAdmRmtExt | 0 | 0 | Determines the Remote Extension or Group Id used for auto-connection on the FXS port. The Remote Extension is a numeric dialing c… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.20 | cxMcVoxFxsAdmRmtId | 0 | 0 | Determines the ID (name) for the remote voice station. Note: This object must be defined in order to obtain a successful voice con… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.21 | cxMcVoxFxsAdmTranspMode | 0 | 0 | Determines the whether to use the Transparent mode on the administrative port. In the transparent mode, the local port will ans… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.22 | cxMcVoxFxsAdmFaxEnable | 0 | 0 | Determines the state of the Memotec's FAX relay software on the administrative E&M port. When set to 'enable', at both ends, th… |
| 1.3.6.1.4.1.495.2.1.1.2.8.2.1.23 | cxMcVoxFxsAdmBroadcast | 0 | 0 | Cetermines the state of the voice broadcast feature. When set to none, no broadcast is used. When set to master, ... Options: none… |