Determines the transmission speed (in bits per second) of the compressed
voice stream on the administrative FXS port. Defining the speed also sets
the ACELP voice compression ratio.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000 (2)
Configuration Changed: administrative
Parsed from file CXMCVOX.MIB.txt
Company: None
Module: CXMCVOX-MIB
Determines the transmission speed (in bits per second) of the compressed
voice stream on the administrative FXS port. Defining the speed also sets
the ACELP voice compression ratio.
Options:
bps5800 (1): compresses at a higher rate and uses slightly less bandwidth.
bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a
higher quality voice sound at the receiving end.
opt3 (3): ADPCM 40.
opt4 (4): ADPCM 32.
opt5 (5): ADPCM 24.
opt6 (6): ADPCM 16.
opt7 (7): Memotec use only.
opt8 (8): Memotec use only.
Default Value: bps8000 (2)
Configuration Changed: administrative
Parsed from file CXMCVOX-MIB.mib
Module: CXMCVOX-MIB
Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxFxsAdmVocoder OBJECT-TYPE SYNTAX INTEGER { bps5800 (1), bps8000 (2), kbps40 (3), kbps32 (4), kbps24 (5), kbps16 (6), opt7 (7), opt8 (8) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the transmission speed (in bits per second) of the compressed voice stream on the administrative FXS port. Defining the speed also sets the ACELP voice compression ratio. Options: bps5800 (1): compresses at a higher rate and uses slightly less bandwidth. bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a higher quality voice sound at the receiving end. opt3 (3): ADPCM 40. opt4 (4): ADPCM 32. opt5 (5): ADPCM 24. opt6 (6): ADPCM 16. opt7 (7): Memotec use only. opt8 (8): Memotec use only. Default Value: bps8000 (2) Configuration Changed: administrative" DEFVAL { bps8000 } ::= { cxMcVoxFxsAdmEntry 4 }
cxMcVoxFxsAdmVocoder OBJECT-TYPE SYNTAX INTEGER { bps5800 (1), bps8000 (2), kbps40 (3), kbps32 (4), kbps24 (5), kbps16 (6), opt7 (7), opt8 (8) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the transmission speed (in bits per second) of the compressed voice stream on the administrative FXS port. Defining the speed also sets the ACELP voice compression ratio. Options: bps5800 (1): compresses at a higher rate and uses slightly less bandwidth. bps8000 (2): compresses at approximately an 8:1 ratio (lower rate) with a higher quality voice sound at the receiving end. opt3 (3): ADPCM 40. opt4 (4): ADPCM 32. opt5 (5): ADPCM 24. opt6 (6): ADPCM 16. opt7 (7): Memotec use only. opt8 (8): Memotec use only. Default Value: bps8000 (2) Configuration Changed: administrative" DEFVAL { bps8000 } ::= { cxMcVoxFxsAdmEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.1.2.8.2.1.1 | cxMcVoxFxsAdmCardUsed | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.2 | cxMcVoxFxsAdmPortUsed | 0 | 0 | Displays the number of the voice port. You cannot modify this object. Options: CX900: 1 is the only acceptable value. Each I/O car… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.3 | cxMcVoxFxsAdmPortStatus | 0 | 0 | Determines the functional status of the administrative port. Options: disable (1): port is not functional enable (2): port is up a… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.5 | cxMcVoxFxsAdmFaxBw | 0 | 0 | Determines the speed (in bits per second) of the FAX channel on the administrative FXS port. This value also determines the band… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.6 | cxMcVoxFxsAdmAutoCnx | 0 | 0 | obsolete |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.7 | cxMcVoxFxsAdmPathId | 0 | 0 | Path IDs no longer exist with the new Voice Routing (VR) scheme. The Path ID is a numeric dialing code the user enters to gain a… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.8 | cxMcVoxFxsAdmTxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice transmissions on the administrative FXS port. The transmis… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.9 | cxMcVoxFxsAdmRxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice reception on the administrative FXS port. The reception ga… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.10 | cxMcVoxFxsAdmEchoCancel | 0 | 0 | Determines the state of echo cancellation on the administrative FXS port. When set to 'enable' at both the local and remote ends… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.11 | cxMcVoxFxsAdmSignaling | 0 | 0 | Determines the type of signalling the administrative FXS port uses to seize the line. Options: ground_start (1) loop_start (2) did (… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.12 | cxMcVoxFxsAdmTimeOn | 0 | 0 | obsolete |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.13 | cxMcVoxFxsAdmTimeOff | 0 | 0 | obsolete |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.14 | cxMcVoxFxsAdmCnctType | 0 | 0 | Determines the method the administrative FXS port uses to make connections. Options: switched (1): the port connects each call acc… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.15 | cxMcVoxFxsAdmRingType | 0 | 0 | Determines the ring type of the administrative FXS port. The ring types provide different ring timing to match the different rin… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.16 | cxMcVoxFxsAdmImpedance | 0 | 0 | Determines the input line impedance of the administrative FXS port. Options: i600_ohms (1) i900_ohms (2) att (3) aus (4) Default Value… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.17 | cxMcVoxFxsAdmDialType | 0 | 0 | Determines the dialing method of the administrative FXS port. The dialing method refers to the sound that occurs when the user e… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.18 | cxMcVoxFxsAdmDidSignalType | 0 | 0 | Note: This object only applies to those ports with the object cxMcVoxFxsAdmSignaling set to 'did'. Determines the type of signali… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.19 | cxMcVoxFxsAdmRmtExt | 0 | 0 | Determines the Remote Extension or Group Id used for auto-connection on the FXS port. The Remote Extension is a numeric dialing c… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.20 | cxMcVoxFxsAdmRmtId | 0 | 0 | Determines the ID (name) for the remote voice station. Note: This object must be defined in order to obtain a successful voice con… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.21 | cxMcVoxFxsAdmTranspMode | 0 | 0 | Determines the whether to use the Transparent mode on the administrative port. In the transparent mode, the local port will ans… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.22 | cxMcVoxFxsAdmFaxEnable | 0 | 0 | Determines the state of the Memotec's FAX relay software on the administrative E&M port. When set to 'enable', at both ends, th… |
1.3.6.1.4.1.495.2.1.1.2.8.2.1.23 | cxMcVoxFxsAdmBroadcast | 0 | 0 | Cetermines the state of the voice broadcast feature. When set to none, no broadcast is used. When set to master, ... Options: none… |