Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxEmOpeEntry OBJECT-TYPE SYNTAX CxMcVoxEmOpeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { cxMcVoxEmOpeCardUsed, cxMcVoxEmOpePortUsed } ::= { cxMcVoxEmOpeTable 1 }
cxMcVoxEmOpeEntry OBJECT-TYPE SYNTAX CxMcVoxEmOpeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "" INDEX { cxMcVoxEmOpeCardUsed, cxMcVoxEmOpePortUsed } ::= { cxMcVoxEmOpeTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.1.2.9.1.1.1 | cxMcVoxEmOpeCardUsed | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.2 | cxMcVoxEmOpePortUsed | 0 | 0 | Displays the number of the voice I/O port. You cannot modify this object. Options: CX900: 1 is the only acceptable value. Each I/O… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.3 | cxMcVoxEmOpePortStatus | 0 | 0 | Displays the functional status of the operative port. You cannot modify this object. If you want to change the value you must mod… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.4 | cxMcVoxEmOpeVocoder | 0 | 0 | Displays the transmission speed (in bits per second) of the compressed voice stream on the operative E&M port. Defining the spee… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.5 | cxMcVoxEmOpeFaxBw | 0 | 0 | Determines the speed (in bits per second) of the FAX channel on the operative E&M port. This value also determines the bandwidth… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.6 | cxMcVoxEmOpeAutoCnx | 0 | 0 | obsolete |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.7 | cxMcVoxEmOpePathId | 0 | 0 | Path IDs no longer exist in the new Voice Routing (VR) scheme. The Path ID is a numeric dialing code the user enters to gain acc… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.8 | cxMcVoxEmOpeTxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice transmissions on the operative E&M port. The transmission … |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.9 | cxMcVoxEmOpeRxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice reception on the operative E&M port. The reception gain ca… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.10 | cxMcVoxEmOpeEchoCancel | 0 | 0 | Displays the state of echo cancellation on the operative E&M port. When set to 'enable' at both the local and remote ends, echo … |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.11 | cxMcVoxEmOpeType | 0 | 0 | Displays the type of E&M interface of the operative E&M port. Each of the five interface types has a unique signal-to-wire patte… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.12 | cxMcVoxEmOpeMode | 0 | 0 | Displays the signalling mode for the operative E&M port. The signalling mode refers to the wires of the physical connection and … |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.13 | cxMcVoxEmOpeDialType | 0 | 0 | Displays the dialing method of the operative E&M port. The dialing method refers to the sound that occurs when the user enters e… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.14 | cxMcVoxEmOpeSignalType | 0 | 0 | Displays the type of signalling the operative E&M port uses to seize the line. You cannot modify this object. If you want to chan… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.15 | cxMcVoxEmOpeAc15Type | 0 | 0 | Displays the type of AC15 signals the operative E&M port uses to seize the line for transmission. This object is only relevant to… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.16 | cxMcVoxEmOpeAc15TimeOn | 0 | 0 | Determines the length of time, in milliseconds, the AC15 pulse remains on. This object is only relevant to E&M ports using the AC… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.17 | cxMcVoxEmOpeAc15TimeOff | 0 | 0 | Determines the length of time, in milliseconds, the AC15 pulse remains off. This object is only relevant to E&M ports using the A… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.18 | cxMcVoxEmOpeCnctType | 0 | 0 | Displays the method the operative E&M port uses to make connections. This object is only relevant to E&M ports using the AC15 si… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.19 | cxMcVoxEmOpeRingType | 0 | 0 | Displays the ring type of the operative E&M port. The ring types provide different ring timing to match the different ring cycle… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.20 | cxMcVoxEmOpeRmtExt | 0 | 0 | Determines the Remote Extension or Group Id used for auto-connection on the E&M port. The Remote Extension is a numeric dialing c… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.21 | cxMcVoxEmOpeRmtId | 0 | 0 | Displays the ID (name) for the remote voice station. Note: This object must be defined in order to obtain a successful voice conn… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.22 | cxMcVoxEmOpeTranspMode | 0 | 0 | Determines the whether to use the Transparent mode on the administrative port. In the transparent mode, the local port will ans… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.23 | cxMcVoxEmOpeFaxEnable | 0 | 0 | Displays the state of the FAX on the operative E&M port. When set to 'enable' at both the local and remote ends, the FAX will be… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.24 | cxMcVoxEmOpeBroadcast | 0 | 0 | Cetermines the state of the voice broadcast feature. When set to none, no broadcast is used. When set to master, ... Options: none… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.25 | cxMcVoxEmOpeImpedance | 0 | 0 | Displays the input line impedance of the operative E&M interface. The value of this object can be modified in operational mode. O… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.26 | cxMcVoxEmOpeVoiceConnection | 0 | 0 | Indicates which voice path is provided by the E&M interface. Options: two_wires (1) four_wires (2) |