Displays the state of echo cancellation on the operative E&M port. When
set to 'enable' at both the local and remote ends, echo cancellation stops
echoes from the remote that are heard through the receiver at the local
end.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmEchoCancel of the cxMcVox Administrative
Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Parsed from file CXMCVOX.MIB.txt
Company: None
Module: CXMCVOX-MIB
Displays the state of echo cancellation on the operative E&M port. When
set to 'enable' at both the local and remote ends, echo cancellation stops
echoes from the remote that are heard through the receiver at the local
end.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxEmAdmEchoCancel of the cxMcVox Administrative
Driver Group.
Options:
disable (1)
enable (2)
Default Value: enable (2)
Parsed from file CXMCVOX-MIB.mib
Module: CXMCVOX-MIB
Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxEmOpeEchoCancel OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the state of echo cancellation on the operative E&M port. When set to 'enable' at both the local and remote ends, echo cancellation stops echoes from the remote that are heard through the receiver at the local end. You cannot modify this object. If you want to change the value you must modify the object cxMcVoxEmAdmEchoCancel of the cxMcVox Administrative Driver Group. Options: disable (1) enable (2) Default Value: enable (2)" DEFVAL { enable } ::= { cxMcVoxEmOpeEntry 10 }
cxMcVoxEmOpeEchoCancel OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the state of echo cancellation on the operative E&M port. When set to 'enable' at both the local and remote ends, echo cancellation stops echoes from the remote that are heard through the receiver at the local end. You cannot modify this object. If you want to change the value you must modify the object cxMcVoxEmAdmEchoCancel of the cxMcVox Administrative Driver Group. Options: disable (1) enable (2) Default Value: enable (2)" DEFVAL { enable } ::= { cxMcVoxEmOpeEntry 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.1.2.9.1.1.1 | cxMcVoxEmOpeCardUsed | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.2 | cxMcVoxEmOpePortUsed | 0 | 0 | Displays the number of the voice I/O port. You cannot modify this object. Options: CX900: 1 is the only acceptable value. Each I/O… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.3 | cxMcVoxEmOpePortStatus | 0 | 0 | Displays the functional status of the operative port. You cannot modify this object. If you want to change the value you must mod… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.4 | cxMcVoxEmOpeVocoder | 0 | 0 | Displays the transmission speed (in bits per second) of the compressed voice stream on the operative E&M port. Defining the spee… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.5 | cxMcVoxEmOpeFaxBw | 0 | 0 | Determines the speed (in bits per second) of the FAX channel on the operative E&M port. This value also determines the bandwidth… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.6 | cxMcVoxEmOpeAutoCnx | 0 | 0 | obsolete |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.7 | cxMcVoxEmOpePathId | 0 | 0 | Path IDs no longer exist in the new Voice Routing (VR) scheme. The Path ID is a numeric dialing code the user enters to gain acc… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.8 | cxMcVoxEmOpeTxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice transmissions on the operative E&M port. The transmission … |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.9 | cxMcVoxEmOpeRxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice reception on the operative E&M port. The reception gain ca… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.11 | cxMcVoxEmOpeType | 0 | 0 | Displays the type of E&M interface of the operative E&M port. Each of the five interface types has a unique signal-to-wire patte… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.12 | cxMcVoxEmOpeMode | 0 | 0 | Displays the signalling mode for the operative E&M port. The signalling mode refers to the wires of the physical connection and … |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.13 | cxMcVoxEmOpeDialType | 0 | 0 | Displays the dialing method of the operative E&M port. The dialing method refers to the sound that occurs when the user enters e… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.14 | cxMcVoxEmOpeSignalType | 0 | 0 | Displays the type of signalling the operative E&M port uses to seize the line. You cannot modify this object. If you want to chan… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.15 | cxMcVoxEmOpeAc15Type | 0 | 0 | Displays the type of AC15 signals the operative E&M port uses to seize the line for transmission. This object is only relevant to… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.16 | cxMcVoxEmOpeAc15TimeOn | 0 | 0 | Determines the length of time, in milliseconds, the AC15 pulse remains on. This object is only relevant to E&M ports using the AC… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.17 | cxMcVoxEmOpeAc15TimeOff | 0 | 0 | Determines the length of time, in milliseconds, the AC15 pulse remains off. This object is only relevant to E&M ports using the A… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.18 | cxMcVoxEmOpeCnctType | 0 | 0 | Displays the method the operative E&M port uses to make connections. This object is only relevant to E&M ports using the AC15 si… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.19 | cxMcVoxEmOpeRingType | 0 | 0 | Displays the ring type of the operative E&M port. The ring types provide different ring timing to match the different ring cycle… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.20 | cxMcVoxEmOpeRmtExt | 0 | 0 | Determines the Remote Extension or Group Id used for auto-connection on the E&M port. The Remote Extension is a numeric dialing c… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.21 | cxMcVoxEmOpeRmtId | 0 | 0 | Displays the ID (name) for the remote voice station. Note: This object must be defined in order to obtain a successful voice conn… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.22 | cxMcVoxEmOpeTranspMode | 0 | 0 | Determines the whether to use the Transparent mode on the administrative port. In the transparent mode, the local port will ans… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.23 | cxMcVoxEmOpeFaxEnable | 0 | 0 | Displays the state of the FAX on the operative E&M port. When set to 'enable' at both the local and remote ends, the FAX will be… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.24 | cxMcVoxEmOpeBroadcast | 0 | 0 | Cetermines the state of the voice broadcast feature. When set to none, no broadcast is used. When set to master, ... Options: none… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.25 | cxMcVoxEmOpeImpedance | 0 | 0 | Displays the input line impedance of the operative E&M interface. The value of this object can be modified in operational mode. O… |
1.3.6.1.4.1.495.2.1.1.2.9.1.1.26 | cxMcVoxEmOpeVoiceConnection | 0 | 0 | Indicates which voice path is provided by the E&M interface. Options: two_wires (1) four_wires (2) |