Displays the method the operative FXS port uses to make connections.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmCnctType of the cxMcVox Administrative FXS
Driver Group.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto_connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)
Parsed from file CXMCVOX.MIB.txt
Company: None
Module: CXMCVOX-MIB
Displays the method the operative FXS port uses to make connections.
You cannot modify this object. If you want to change the value you must
modify the object cxMcVoxFxsAdmCnctType of the cxMcVox Administrative FXS
Driver Group.
Options:
switched (1): the port connects each call according to the dialing code
the user enters.
auto-connect (2): calls passing through this port always terminate at the
same remote destination. The port connects to the remote as soon as the
local receiver enters the off-hook state. Any remote can connect to a port
with an auto-connect configuration but when the local user initiates the
call it always goes to the same remote.
fixed (3): calls passing through this port always terminate at the same
remote destination. The port connects to the remote as soon as the local
receiver enters the off-hook state. Only the local and remote destinations
of the connection can use this port. No other remote location can gain
access to this port.
Default Value: switched (1)
Parsed from file CXMCVOX-MIB.mib
Module: CXMCVOX-MIB
Vendor: Memotec Communications
Module: CXMCVOX-MIB
[Automatically extracted from oidview.com]
cxMcVoxFxsOpeCnctType OBJECT-TYPE SYNTAX INTEGER { switched (1), auto_connect (2), fixed (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the method the operative FXS port uses to make connections. You cannot modify this object. If you want to change the value you must modify the object cxMcVoxFxsAdmCnctType of the cxMcVox Administrative FXS Driver Group. Options: switched (1): the port connects each call according to the dialing code the user enters. auto_connect (2): calls passing through this port always terminate at the same remote destination. The port connects to the remote as soon as the local receiver enters the off-hook state. Any remote can connect to a port with an auto-connect configuration but when the local user initiates the call it always goes to the same remote. fixed (3): calls passing through this port always terminate at the same remote destination. The port connects to the remote as soon as the local receiver enters the off-hook state. Only the local and remote destinations of the connection can use this port. No other remote location can gain access to this port. Default Value: switched (1)" DEFVAL { switched } ::= { cxMcVoxFxsOpeEntry 14 }
cxMcVoxFxsOpeCnctType OBJECT-TYPE SYNTAX INTEGER { switched (1), auto-connect (2), fixed (3) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the method the operative FXS port uses to make connections. You cannot modify this object. If you want to change the value you must modify the object cxMcVoxFxsAdmCnctType of the cxMcVox Administrative FXS Driver Group. Options: switched (1): the port connects each call according to the dialing code the user enters. auto-connect (2): calls passing through this port always terminate at the same remote destination. The port connects to the remote as soon as the local receiver enters the off-hook state. Any remote can connect to a port with an auto-connect configuration but when the local user initiates the call it always goes to the same remote. fixed (3): calls passing through this port always terminate at the same remote destination. The port connects to the remote as soon as the local receiver enters the off-hook state. Only the local and remote destinations of the connection can use this port. No other remote location can gain access to this port. Default Value: switched (1)" DEFVAL { switched } ::= { cxMcVoxFxsOpeEntry 14 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.1.2.9.2.1.1 | cxMcVoxFxsOpeCardUsed | 0 | 0 | Displays the slot number of the voice I/O card. You cannot modify this object. Range of Values: CX900: 1 to 6 CX1000: 1 to 8 Default… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.2 | cxMcVoxFxsOpePortUsed | 0 | 0 | Displays the number of the voice I/O port. You cannot modify this object Options: CX900: 1 is the only acceptable value. Each I/O … |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.3 | cxMcVoxFxsOpePortStatus | 0 | 0 | Displays the functional status of the operative port. You cannot modify this object. If you want to change the value you must mod… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.4 | cxMcVoxFxsOpeVocoder | 0 | 0 | Displays the transmission speed (in bits per second) of the compressed voice stream on the operative FXS port. Defining the spee… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.5 | cxMcVoxFxsOpeFaxBw | 0 | 0 | Determines the speed (in bits per second) of the FAX channel on the operative FXS port. This value also determines the bandwidth… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.6 | cxMcVoxFxsOpeAutoCnx | 0 | 0 | Obsolete |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.7 | cxMcVoxFxsOpePathId | 0 | 0 | Path IDs no longer exist in the new Voice Routing (VR) scheme. The PathID was formerly used for auto-connection on the operative… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.8 | cxMcVoxFxsOpeTxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice transmissions on the operative FXS port. The transmission … |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.9 | cxMcVoxFxsOpeRxGain | 0 | 0 | Determines the value defining the sound intensity (loudness) of voice reception on the operative FXS port. The reception gain ca… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.10 | cxMcVoxFxsOpeEchoCancel | 0 | 0 | Displays the state of echo cancellation on the operative FXS port. When set to 'enable' at both the local and remote ends, echo … |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.11 | cxMcVoxFxsOpeSignaling | 0 | 0 | Displays the type of signalling the operative FXS port uses to seize the line. You cannot modify this object. If you want to chan… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.12 | cxMcVoxFxsOpeTimeOn | 0 | 0 | Obsolete |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.13 | cxMcVoxFxsOpeTimeOff | 0 | 0 | Obsoleted |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.15 | cxMcVoxFxsOpeRingType | 0 | 0 | Displays the ring type of the operative FXS port. The ring types provide different ring timing to match the different ring cycle… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.16 | cxMcVoxFxsOpeImpedance | 0 | 0 | Displays the input line impedance of the operative FXS interface. The value of this object can be modified in operational mode. O… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.17 | cxMcVoxFxsOpeDialType | 0 | 0 | Displays the dialing method of the operative FXS port. The dialing method refers to the sound that occurs when the user enters e… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.18 | cxMcVoxFxsOpeDidSignalType | 0 | 0 | Displays the type of signaling on the operative FXS port. The signaling type refers to the line seizure technique. You cannot mod… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.19 | cxMcVoxFxsOpeRmtExt | 0 | 0 | Determines the Remote Extension or Group Id used for auto-connection on the FXS port. The Remote Extension is a numeric dialing c… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.20 | cxMcVoxFxsOpeRmtId | 0 | 0 | Displays the ID (name) for the remote voice station. Note: This object must be defined in order to obtain a successful voice conn… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.21 | cxMcVoxFxsOpeTranspMode | 0 | 0 | Determines the whether to use the Transparent mode on the administrative port. In the transparent mode, the local port will ans… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.22 | cxMcVoxFxsOpeFaxEnable | 0 | 0 | Displays the state of the FAX on the operative FXS port. When set to 'enable' at both the local and remote ends, the FAX will be… |
1.3.6.1.4.1.495.2.1.1.2.9.2.1.23 | cxMcVoxFxsOpeBroadcast | 0 | 0 | Cetermines the state of the voice broadcast feature. When set to none, no broadcast is used. When set to master, ... Options: none… |