Determines the amount of system resources which are required by the X.25
layer to avoid congestion. When system resources drop below this
threshold, the X.25 layer does the following:
- prohibits new virtual circuits from being established on any SAP
(service access point)
- initiates flow control on all existing virtual circuits receiving data
(an RNR is transmitted on each circuit)
When global resources rise above this threshold after having dropped below
it, the X.25 layer does the following:
- it disables flow control on all suspended virtual circuits (transmits a
RR on each circuit that that it previously transmitted an RNR on)
- permits new virtual circuits to be established
The value of this object must not be less than the value of object
x25LowerPoolThreshold.
Range of Values: 1 - 99
Default Value: 40 (40 percent)
Related Objects:
x25LowerPoolThreshold
x25SapFlowControlTimer
Configuration Changed: administrative
Parsed from file CXX25.MIB.txt
Company: None
Module: CXX25-MIB
Determines the amount of system resources which are required by the X.25
layer to avoid congestion. When system resources drop below this
threshold, the X.25 layer does the following:
- prohibits new virtual circuits from being established on any SAP
(service access point)
- initiates flow control on all existing virtual circuits receiving data
(an RNR is transmitted on each circuit)
When global resources rise above this threshold after having dropped below
it, the X.25 layer does the following:
- it disables flow control on all suspended virtual circuits (transmits a
RR on each circuit that that it previously transmitted an RNR on)
- permits new virtual circuits to be established
The value of this object must not be less than the value of object
x25LowerPoolThreshold.
Range of Values: 1 - 99
Default Value: 40 (40 percent)
Related Objects:
x25LowerPoolThreshold
x25SapFlowControlTimer
Configuration Changed: administrative
Parsed from file CXX25-MIB.mib
Module: CXX25-MIB
Vendor: Memotec Communications
Module: CXX25-MIB
[Automatically extracted from oidview.com]
x25UpperPoolThreshold OBJECT-TYPE SYNTAX INTEGER (1..99) ACCESS read-write STATUS mandatory DESCRIPTION "Determines the amount of system resources which are required by the X.25 layer to avoid congestion. When system resources drop below this threshold, the X.25 layer does the following: - prohibits new virtual circuits from being established on any SAP (service access point) - initiates flow control on all existing virtual circuits receiving data (an RNR is transmitted on each circuit) When global resources rise above this threshold after having dropped below it, the X.25 layer does the following: - it disables flow control on all suspended virtual circuits (transmits a RR on each circuit that that it previously transmitted an RNR on) - permits new virtual circuits to be established The value of this object must not be less than the value of object x25LowerPoolThreshold. Range of Values: 1 - 99 Default Value: 40 (40 percent) Related Objects: x25LowerPoolThreshold x25SapFlowControlTimer Configuration Changed: administrative" DEFVAL { 40 } ::= { cxX25 2 }
x25UpperPoolThreshold OBJECT-TYPE SYNTAX INTEGER (1..99) ACCESS read-write STATUS mandatory DESCRIPTION "Determines the amount of system resources which are required by the X.25 layer to avoid congestion. When system resources drop below this threshold, the X.25 layer does the following: - prohibits new virtual circuits from being established on any SAP (service access point) - initiates flow control on all existing virtual circuits receiving data (an RNR is transmitted on each circuit) When global resources rise above this threshold after having dropped below it, the X.25 layer does the following: - it disables flow control on all suspended virtual circuits (transmits a RR on each circuit that that it previously transmitted an RNR on) - permits new virtual circuits to be established The value of this object must not be less than the value of object x25LowerPoolThreshold. Range of Values: 1 - 99 Default Value: 40 (40 percent) Related Objects: x25LowerPoolThreshold x25SapFlowControlTimer Configuration Changed: administrative" DEFVAL { 40 } ::= { cxX25 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.2.0 | x25UpperPoolThreshold | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.29.1 | x25LowerPoolThreshold | 1 | 1 | Determines the minimum amount of system resources which are required by the X.25 layer. When system resources drop below this th… |
| 1.3.6.1.4.1.495.2.1.6.29.3 | x25RouteMask | 1 | 1 | Determines the number of digits to use for routing calls. If set to value '0', calls are routed normally, according to the calle… |
| 1.3.6.1.4.1.495.2.1.6.29.4 | x25BillingSegmentSize | 1 | 1 | Determines the size of billing data segments. Range of Values: 16 - 1024 bytes Default Value: 16 bytes Related Objects: x25Billing x… |
| 1.3.6.1.4.1.495.2.1.6.29.5 | x25Billing | 1 | 1 | Determines if this layer generates the x25BillingIndication trap. For switched virtual circuits the trap is generated each time … |
| 1.3.6.1.4.1.495.2.1.6.29.6 | x25NetworkType | 1 | 1 | Determines the format of the cause codes the X.25 layer adds to Reset, Restart, and Clear packets. Note: The X.25 layer will not … |
| 1.3.6.1.4.1.495.2.1.6.29.7 | x25HuntGroupRotation | 1 | 1 | Determines if hunt group members are rotated. Enabling rotation causes hunting to begin with a different hunt group member each … |
| 1.3.6.1.4.1.495.2.1.6.29.10 | x25Alarms | 1 | 1 | For future use. Determines if this layer generates the x25SapAlarm trap. Options: disabled (1): This layer does not generate the … |
| 1.3.6.1.4.1.495.2.1.6.29.11 | x25SapStatusEvent | 1 | 1 | For future use. Indicates the status reported by an x25SapAlarm trap when it occurs. This object always returns the value 'noEve… |
| 1.3.6.1.4.1.495.2.1.6.29.12 | x25ConfigErrorEvent | 1 | 1 | For future use. Indicates the status reported by an x25ConfigErrorIndication trap when it occurs. This object always returns the … |
| 1.3.6.1.4.1.495.2.1.6.29.19 | x25SoftwareVersions | 1 | 1 | Identifies the X.25 software revision number, which is displayed as a string of five numbers each separated by a period (1.2.3.4… |
| 1.3.6.1.4.1.495.2.1.6.29.20 | x25LogicalLinkTable | 1 | 7 | A logical link is a group of one or more lower service access points(SAPs) created for the purpose of route balancing. Two types… |
| 1.3.6.1.4.1.495.2.1.6.29.21 | x25SapTable | 1 | 71 | The SAP table contains configuration information for each X.25 layer SAP (service access point). Service Access Points Two types o… |
| 1.3.6.1.4.1.495.2.1.6.29.22 | x25SapStatsTable | 1 | 33 | A table containing statistical information about each service access point. |
| 1.3.6.1.4.1.495.2.1.6.29.23 | x25CugTable | 1 | 9 | This tables contains CUG (closed user group) definitions for the X.25 layer. Any service access point (upper or lower) can be pa… |
| 1.3.6.1.4.1.495.2.1.6.29.24 | x25RouteTable | 1 | 9 | The SVC Route table contains the definitions used to route all switched virtual circuits. A route entry consists of the called ad… |
| 1.3.6.1.4.1.495.2.1.6.29.25 | x25HuntGroupTable | 1 | 6 | This table contains Hunt Group definitions for the X.25 layer. A hunt group is a grouping of upper and lower SAPs (service acces… |
| 1.3.6.1.4.1.495.2.1.6.29.26 | x25HuntGroupOperTable | 1 | 5 | This table contains the current active Hunt Group (closed user group) definitions for the X.25 layer. Use the x25HuntGroupTable … |
| 1.3.6.1.4.1.495.2.1.6.29.27 | x25PvcTable | 1 | 21 | This table contains definitions used to route X.25 PVCs (permanent virtual circuits). A PVC is always routed between two lower S… |
| 1.3.6.1.4.1.495.2.1.6.29.28 | x25LcnStatusTable | 1 | 32 | A table containing current information about established virtual circuits (permanent or switched) within the layer. |
| 1.3.6.1.4.1.495.2.1.6.29.30 | x25MibLevel | 1 | 1 | Used to determine current MIB module release supported by the agent. Object is in decimal. |