Defines a row in the x25SapTable. Each row contains the objects which
define a service access point.
Parsed from file CXX25.MIB.txt
Company: None
Module: CXX25-MIB
Defines a row in the x25SapTable. Each row contains the objects which
define a service access point.
Parsed from file CXX25-MIB.mib
Module: CXX25-MIB
Vendor: Memotec Communications
Module: CXX25-MIB
[Automatically extracted from oidview.com]
x25SapEntry OBJECT-TYPE SYNTAX X25SapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines a row in the x25SapTable. Each row contains the objects which define a service access point." INDEX { x25SapNumber, x25SapCes } ::= { x25SapTable 1 }
x25SapEntry OBJECT-TYPE SYNTAX X25SapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines a row in the x25SapTable. Each row contains the objects which define a service access point." INDEX { x25SapNumber, x25SapCes } ::= { x25SapTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.6.29.21.1.1 | x25SapNumber | 0 | 0 | Identifies this SAP (service access point) with a numerical value. This is the first half of the SAP identifier. The second half… |
1.3.6.1.4.1.495.2.1.6.29.21.1.2 | x25SapCes | 0 | 0 | Identifies the CES (connection endpoint suffix) that is associated with this SAP (service access point). CES is used by X.25 ove… |
1.3.6.1.4.1.495.2.1.6.29.21.1.3 | x25SapRowStatus | 0 | 0 | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however val… |
1.3.6.1.4.1.495.2.1.6.29.21.1.4 | x25SapType | 0 | 0 | Specifies this SAP (service access point) as either 'upper' or 'lower'. Options: lower (1): This is a lower SAP. upper (2): This i… |
1.3.6.1.4.1.495.2.1.6.29.21.1.5 | x25SapAlias | 0 | 0 | Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Rang… |
1.3.6.1.4.1.495.2.1.6.29.21.1.6 | x25SapCompanionAlias | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the sub-layer SAP this SAP communicates with. This ob… |
1.3.6.1.4.1.495.2.1.6.29.21.1.13 | x25SapInterfaceType | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the SAP interface type. This is used to determine the… |
1.3.6.1.4.1.495.2.1.6.29.21.1.14 | x25SapLinkType | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the type of service provided by this SAP. Options: x25L… |
1.3.6.1.4.1.495.2.1.6.29.21.1.19 | x25SapRoutePartition | 0 | 0 | Determines the route table partition used to route incoming calls. Default Value: 0 Related Objects: x25RouteTable Configuration Ch… |
1.3.6.1.4.1.495.2.1.6.29.21.1.20 | x25SapRouteDirection | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the direction for the routing of incoming calls. Optio… |
1.3.6.1.4.1.495.2.1.6.29.21.1.21 | x25SapWildCardRouting | 0 | 0 | Determines if this SAP applies a routing mask to the called address in incoming calls prior to routing. This implies that certai… |
1.3.6.1.4.1.495.2.1.6.29.21.1.22 | x25SapWildCardRoutingMask | 0 | 0 | Determines the route mask, which is applied to the called address in incoming calls prior to routing. The route mask is a bit ma… |
1.3.6.1.4.1.495.2.1.6.29.21.1.26 | x25SapActivation | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the type of data link activation used by this SAP. Th… |
1.3.6.1.4.1.495.2.1.6.29.21.1.27 | x25SapPvcBillingTimer | 0 | 0 | For future use. This object applies only to lower SAPs (service access points). Determines the period between generation of billi… |
1.3.6.1.4.1.495.2.1.6.29.21.1.31 | x25SapModulo | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the range of sequence numbers available for packet nu… |
1.3.6.1.4.1.495.2.1.6.29.21.1.32 | x25SapRxPacketSize | 0 | 0 | Determines the default receive packet size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrFl… |
1.3.6.1.4.1.495.2.1.6.29.21.1.33 | x25SapTxPacketSize | 0 | 0 | Determines the default transmit packet size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrF… |
1.3.6.1.4.1.495.2.1.6.29.21.1.34 | x25SapRxWindowSize | 0 | 0 | Determines the default receive window size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrFl… |
1.3.6.1.4.1.495.2.1.6.29.21.1.35 | x25SapTxWindowSize | 0 | 0 | Determines the default transmit window size used by this SAP. This value is used only when flow control negotiation (x25SapSbscrF… |
1.3.6.1.4.1.495.2.1.6.29.21.1.36 | x25SapRxThruputClass | 0 | 0 | Determines the default receive throughput class used by this SAP. This value is used only when throughput class negotiation (x25S… |
1.3.6.1.4.1.495.2.1.6.29.21.1.37 | x25SapTxThruputClass | 0 | 0 | Determines the default transmit throughput class used by this SAP. This value is used only when throughput class negotiation (x25… |
1.3.6.1.4.1.495.2.1.6.29.21.1.38 | x25SapRxWindowThreshold | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the threshold at which this lower SAP is forced to cl… |
1.3.6.1.4.1.495.2.1.6.29.21.1.48 | x25SapLcnAllocation | 0 | 0 | Determines the order in which logical channel numbers (LCNs) are assigned by this SAP (service access point). Options: ascending (… |
1.3.6.1.4.1.495.2.1.6.29.21.1.49 | x25SapLpvcLcn | 0 | 0 | Determines the lowest LCN (logical channel number) for permanent virtual circuits established at this SAP. Range of Values: 0 - 1… |
1.3.6.1.4.1.495.2.1.6.29.21.1.50 | x25SapHpvcLcn | 0 | 0 | Determines the highest LCN (logical channel number) for permanent virtual circuits established at this SAP. This value must be g… |
1.3.6.1.4.1.495.2.1.6.29.21.1.51 | x25SapLicLcn | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the lowest LCN (logical channel number) for incoming … |
1.3.6.1.4.1.495.2.1.6.29.21.1.52 | x25SapHicLcn | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the highest LCN (logical channel number) for incoming… |
1.3.6.1.4.1.495.2.1.6.29.21.1.53 | x25SapLtcLcn | 0 | 0 | Determines the lowest LCN (logical channel number) for two-way virtual circuits at this SAP. This value must be greater than x25… |
1.3.6.1.4.1.495.2.1.6.29.21.1.54 | x25SapHtcLcn | 0 | 0 | Determines the lowest LCN (logical channel number) for two-way virtual circuits at this SAP. This value must be greater than x25… |
1.3.6.1.4.1.495.2.1.6.29.21.1.55 | x25SapLocLcn | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the lowest LCN (logical channel number) for two-way v… |
1.3.6.1.4.1.495.2.1.6.29.21.1.56 | x25SapHocLcn | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the highest LCN (logical channel number) for outgoing… |
1.3.6.1.4.1.495.2.1.6.29.21.1.61 | x25SapConnectTimer | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the maximum time that this SAP waits for the sub-laye… |
1.3.6.1.4.1.495.2.1.6.29.21.1.62 | x25SapDisconnectTimer | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the maximum time that this SAP waits for the sub-laye… |
1.3.6.1.4.1.495.2.1.6.29.21.1.63 | x25SapRestartTimer | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the maximum time that this SAP waits for a Restart Co… |
1.3.6.1.4.1.495.2.1.6.29.21.1.64 | x25SapCallTimer | 0 | 0 | Determines the maximum amount of time this SAP waits for a Call Connected packet in response to a previously sent Call Request p… |
1.3.6.1.4.1.495.2.1.6.29.21.1.65 | x25SapResetTimer | 0 | 0 | Determines the maximum amount of time this SAP waits for a Reset Confirmation packet in response to a previously sent Reset Requ… |
1.3.6.1.4.1.495.2.1.6.29.21.1.66 | x25SapClearTimer | 0 | 0 | Determines the maximum amount of time this SAP waits for a Clear Confirmation packet in response to a previously sent Clear Requ… |
1.3.6.1.4.1.495.2.1.6.29.21.1.67 | x25SapInactivityTimer | 0 | 0 | Determines the maximum amount of time this SAP (service access point) can hold outbound queued data for a virtual circuit. If th… |
1.3.6.1.4.1.495.2.1.6.29.21.1.68 | x25SapFlowControlTimer | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the amount of time between checks of available system… |
1.3.6.1.4.1.495.2.1.6.29.21.1.69 | x25SapWindowStatusTimer | 0 | 0 | Determines the maximum amount of time this SAP waits for an outgoing packet to piggy-back an acknowledgment onto. If this timer … |
1.3.6.1.4.1.495.2.1.6.29.21.1.80 | x25SapSbscrCalledAddressInsertion | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP inserts the called address in Call Accept… |
1.3.6.1.4.1.495.2.1.6.29.21.1.81 | x25SapSbscrCallingAddressInsertion | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP inserts the calling address in Call Accep… |
1.3.6.1.4.1.495.2.1.6.29.21.1.82 | x25SapSbscrPktRetransmission | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Packet Retransmission f… |
1.3.6.1.4.1.495.2.1.6.29.21.1.83 | x25SapSbscrInAccessBarred | 0 | 0 | Determines if this SAP subscribes to the Incoming Calls Barred facility. Options: false (1): Not subscribed. true (2): Subscribed:… |
1.3.6.1.4.1.495.2.1.6.29.21.1.84 | x25SapSbscrOutAccessBarred | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Outgoing Calls Barred f… |
1.3.6.1.4.1.495.2.1.6.29.21.1.85 | x25SapSbscrFlowCntrlParamNegotiation | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Flow Control Parameter N… |
1.3.6.1.4.1.495.2.1.6.29.21.1.86 | x25SapSbscrThruputClassNegotiation | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Throughput Class Negoti… |
1.3.6.1.4.1.495.2.1.6.29.21.1.87 | x25SapSbscrFastSelect | 0 | 0 | Determines if this SAP subscribes to the Fast Select facility. This applies to outgoing calls only. Options: false (1): Not subscr… |
1.3.6.1.4.1.495.2.1.6.29.21.1.88 | x25SapSbscrFastSelectAcceptance | 0 | 0 | Determines if this SAP subscribes to the Fast Select Acceptance facility. This applies to incoming calls only. Options: false (1):… |
1.3.6.1.4.1.495.2.1.6.29.21.1.89 | x25SapSbscrReverseChargingAcceptance | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Reverse Charging Accept… |
1.3.6.1.4.1.495.2.1.6.29.21.1.90 | x25SapSbscrLocalChargingPrevention | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Local Charging Preventi… |
1.3.6.1.4.1.495.2.1.6.29.21.1.91 | x25SapSbscrChargingInformation | 0 | 0 | Determines if this SAP subscribes to the Charging Information facility. This facility applies to incoming calls only. Options: fal… |
1.3.6.1.4.1.495.2.1.6.29.21.1.92 | x25SapSbscrCallRedirection | 0 | 0 | Determines if this SAP subscribes to the Call Redirection facility. This facility applies to outgoing calls only. Options: false (… |
1.3.6.1.4.1.495.2.1.6.29.21.1.93 | x25SapSbscrPermissionToRedirect | 0 | 0 | Determines if this SAP subscribes to the Permission to Redirect facility. This facility applies to incoming calls only. Options: f… |
1.3.6.1.4.1.495.2.1.6.29.21.1.94 | x25SapRedirectionAddress | 0 | 0 | Determines the address this SAP redirects calls to. To make use of this address this SAP must subscribe to the Call Redirection … |
1.3.6.1.4.1.495.2.1.6.29.21.1.95 | x25SapSbscrNetworkUserId | 0 | 0 | Determines if this SAP subscribes to the Network User Indentification (NUI) facility. This facility applies to incoming calls on… |
1.3.6.1.4.1.495.2.1.6.29.21.1.96 | x25SapSbscrCallingAddressValidation | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Calling Address Validat… |
1.3.6.1.4.1.495.2.1.6.29.21.1.97 | x25SapSourceAddress | 0 | 0 | This object applies only to lower SAPs (service access points). Determines the calling address used by this SAP when it subscrib… |
1.3.6.1.4.1.495.2.1.6.29.21.1.98 | x25SapSbscrRouteUsingCUDF | 0 | 0 | Determines if this SAP subscribes to the Call User Data facility for routing. This facility applies to incoming calls only. Each … |
1.3.6.1.4.1.495.2.1.6.29.21.1.99 | x25SapSbscrRouteUsingSubAddress | 0 | 0 | Determines if this SAP uses the subaddress field for routing. This facility applies to incoming calls only. Each SAP can only sub… |
1.3.6.1.4.1.495.2.1.6.29.21.1.100 | x25SapSbscrRouteUsingCAE | 0 | 0 | Determines if this SAP uses the called address extension facility for routing. This facility applies to incoming calls only. Each… |
1.3.6.1.4.1.495.2.1.6.29.21.1.101 | x25SapRouteAddressLength | 0 | 0 | Determines the number of digits this SAP uses as the destination address when routing incoming calls. This applies when one of t… |
1.3.6.1.4.1.495.2.1.6.29.21.1.102 | x25SapSbscrTransitDelay | 0 | 0 | This object applies only to lower SAPs (service access points). Determines if this SAP subscribes to the Calling Address Validat… |
1.3.6.1.4.1.495.2.1.6.29.21.1.103 | x25SapTransitDelay | 0 | 0 | This object applies only to lower SAPs (service access points). Defines the transit delay appended by this SAP if it subscribes … |
1.3.6.1.4.1.495.2.1.6.29.21.1.104 | x25SapSbscrCugIncomingAccess | 0 | 0 | Determines if this SAP subscribes to the Closed User Group with Incoming Access facility. This facility applies to outgoing call… |
1.3.6.1.4.1.495.2.1.6.29.21.1.105 | x25SapSbscrCugOutgoingAccess | 0 | 0 | Determines if this SAP subscribes to the Closed User Group with Outgoing Access facility. This facility applies to incoming call… |
1.3.6.1.4.1.495.2.1.6.29.21.1.106 | x25SapPreferentialCugIndex | 0 | 0 | Determines the preferential CUG index for this SAP. This is required when this SAP belongs to more than one CUG. Range of Values:… |
1.3.6.1.4.1.495.2.1.6.29.21.1.120 | x25SapControl | 0 | 0 | Permits control of a specific SAP (service access point). Options: clearStats (1): Clear all statistics stored by x25Sap statisti… |
1.3.6.1.4.1.495.2.1.6.29.21.1.125 | x25SapLinkState | 0 | 0 | Determines the current state of this SAP (service access point). Options: connecting (1): In the process of establishing a call. d… |
1.3.6.1.4.1.495.2.1.6.29.21.1.126 | x25SapFlowControlState | 0 | 0 | Indicates the status of flow control on this SAP (service access point). Flow control is initiated by this SAP when overall syst… |