Indicates the status of a failed connection. The value of this object is
only valid only between attempts to establish the route connection
(gimSRRouteStatus = notConnected), and may or may not change after
successive failed attempts.
Options:
noFailure (1): Once a system route has been successfully connected, this
value is maintained for the duration of the connection.
internalError (2): An internal error has occurred.
localAllocFailure (3): There is insufficient memory available for X25
Convergence to establish this connection.
remoteAllocFailure (4): There is insufficient memory available for the
destination protocol layer to establish this connection.
localNoAccess (5): This route is associated with a SAP that does not
exist.
remoteNoAccess (6): This route is associated with a SAP that does not
exist at the destination layer.
localPvcDown (7): For future use.
remotePvcDown (8): The PVC at the destination protocol layer is down.
localPvcBusy (9): The SAP associated with this route is already connected.
remotePvcBusy (10): The destination associated with this route is already
connected. This typically occurs when the route is a non-MPE (PVC
consolidating) circuit.
localFcnFailure (11): Flow control negotiation failed.
remoteFcnFailure (12): Flow control negotiation failed at the destination
protocol layer.
localDsnFailure (13): Data size negotiation failed.
localRefInUse (14): Data size negotiation failed at the destination
protocol layer.
remoteAliasNotFound (15): The destination alias (gimSRDestAlias) does
not exist.
remoteNoPvcService (16): The destination protocol layer does not support
PVC service.
mpeInvalidSubref (17): The value of gimSRSubRef is invalid at the
destination protocol layer. (i.e., lapcnvSRSubRef is set to '0' and the
destination frame relay circuit is configured for PVC consolidation).
Parsed from file CXGIM.MIB.txt
Company: None
Module: CXGIM-MIB
Indicates the status of a failed connection. The value of this object is
only valid only between attempts to establish the route connection
(gimSRRouteStatus = notConnected), and may or may not change after
successive failed attempts.
Options:
noFailure (1): Once a system route has been successfully connected, this
value is maintained for the duration of the connection.
internalError (2): An internal error has occurred.
localAllocFailure (3): There is insufficient memory available for X25
Convergence to establish this connection.
remoteAllocFailure (4): There is insufficient memory available for the
destination protocol layer to establish this connection.
localNoAccess (5): This route is associated with a SAP that does not
exist.
remoteNoAccess (6): This route is associated with a SAP that does not
exist at the destination layer.
localPvcDown (7): For future use.
remotePvcDown (8): The PVC at the destination protocol layer is down.
localPvcBusy (9): The SAP associated with this route is already connected.
remotePvcBusy (10): The destination associated with this route is already
connected. This typically occurs when the route is a non-MPE (PVC
consolidating) circuit.
localFcnFailure (11): Flow control negotiation failed.
remoteFcnFailure (12): Flow control negotiation failed at the destination
protocol layer.
localDsnFailure (13): Data size negotiation failed.
localRefInUse (14): Data size negotiation failed at the destination
protocol layer.
remoteAliasNotFound (15): The destination alias (gimSRDestAlias) does
not exist.
remoteNoPvcService (16): The destination protocol layer does not support
PVC service.
mpeInvalidSubref (17): The value of gimSRSubRef is invalid at the
destination protocol layer. (i.e., lapcnvSRSubRef is set to '0' and the
destination frame relay circuit is configured for PVC consolidation).
Parsed from file CXGIM-MIB.mib
Module: CXGIM-MIB
Vendor: Memotec Communications
Module: CXGIM-MIB
[Automatically extracted from oidview.com]
gimSRClearStatus OBJECT-TYPE SYNTAX INTEGER { noFailure (1), internalError (2), localAllocFailure (3), remoteAllocFailure (4), localNoAccess (5), remoteNoAccess (6), localPvcDown (7), remotePvcDown (8), localPvcBusy (9), remotePvcBusy (10), localFcnFailure (11), remoteFcnFailure (12), localDsnFailure (13), localRefInUse (14), remoteAliasNotFound (15), remoteNoPvcService (16), mpeInvalidSubref (17) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the status of a failed connection. The value of this object is only valid only between attempts to establish the route connection (gimSRRouteStatus = notConnected), and may or may not change after successive failed attempts. Options: noFailure (1): Once a system route has been successfully connected, this value is maintained for the duration of the connection. internalError (2): An internal error has occurred. localAllocFailure (3): There is insufficient memory available for X25 Convergence to establish this connection. remoteAllocFailure (4): There is insufficient memory available for the destination protocol layer to establish this connection. localNoAccess (5): This route is associated with a SAP that does not exist. remoteNoAccess (6): This route is associated with a SAP that does not exist at the destination layer. localPvcDown (7): For future use. remotePvcDown (8): The PVC at the destination protocol layer is down. localPvcBusy (9): The SAP associated with this route is already connected. remotePvcBusy (10): The destination associated with this route is already connected. This typically occurs when the route is a non-MPE (PVC consolidating) circuit. localFcnFailure (11): Flow control negotiation failed. remoteFcnFailure (12): Flow control negotiation failed at the destination protocol layer. localDsnFailure (13): Data size negotiation failed. localRefInUse (14): Data size negotiation failed at the destination protocol layer. remoteAliasNotFound (15): The destination alias (gimSRDestAlias) does not exist. remoteNoPvcService (16): The destination protocol layer does not support PVC service. mpeInvalidSubref (17): The value of gimSRSubRef is invalid at the destination protocol layer. (i.e., lapcnvSRSubRef is set to '0' and the destination frame relay circuit is configured for PVC consolidation)." ::= { gimSysRouteEntry 11 }
gimSRClearStatus OBJECT-TYPE SYNTAX INTEGER { noFailure (1), internalError (2), localAllocFailure (3), remoteAllocFailure (4), localNoAccess (5), remoteNoAccess (6), localPvcDown (7), remotePvcDown (8), localPvcBusy (9), remotePvcBusy (10), localFcnFailure (11), remoteFcnFailure (12), localDsnFailure (13), localRefInUse (14), remoteAliasNotFound (15), remoteNoPvcService (16), mpeInvalidSubref (17) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the status of a failed connection. The value of this object is only valid only between attempts to establish the route connection (gimSRRouteStatus = notConnected), and may or may not change after successive failed attempts. Options: noFailure (1): Once a system route has been successfully connected, this value is maintained for the duration of the connection. internalError (2): An internal error has occurred. localAllocFailure (3): There is insufficient memory available for X25 Convergence to establish this connection. remoteAllocFailure (4): There is insufficient memory available for the destination protocol layer to establish this connection. localNoAccess (5): This route is associated with a SAP that does not exist. remoteNoAccess (6): This route is associated with a SAP that does not exist at the destination layer. localPvcDown (7): For future use. remotePvcDown (8): The PVC at the destination protocol layer is down. localPvcBusy (9): The SAP associated with this route is already connected. remotePvcBusy (10): The destination associated with this route is already connected. This typically occurs when the route is a non-MPE (PVC consolidating) circuit. localFcnFailure (11): Flow control negotiation failed. remoteFcnFailure (12): Flow control negotiation failed at the destination protocol layer. localDsnFailure (13): Data size negotiation failed. localRefInUse (14): Data size negotiation failed at the destination protocol layer. remoteAliasNotFound (15): The destination alias (gimSRDestAlias) does not exist. remoteNoPvcService (16): The destination protocol layer does not support PVC service. mpeInvalidSubref (17): The value of gimSRSubRef is invalid at the destination protocol layer. (i.e., lapcnvSRSubRef is set to '0' and the destination frame relay circuit is configured for PVC consolidation)." ::= { gimSysRouteEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.55.11.1.1 | gimSRSapType | 0 | 0 | Identifies the type of service access point this route entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.2 | gimSRSapNumber | 0 | 0 | Identifies the service access point this route entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.3 | gimSRRowStatus | 0 | 0 | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however val… |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.4 | gimSRDestAlias | 0 | 0 | Determines the textual name of the destination service this route connects to. When attempting a X25 connection across Frame Rel… |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.5 | gimSRSubRef | 0 | 0 | Specifies a reference number that uniquely identifies this route. This number is used by the FRIM (Frame Relay Interface Module)… |
| 1.3.6.1.4.1.495.2.1.6.55.11.1.10 | gimSRRouteStatus | 0 | 0 | Indicates the connection status of this X25 route. Options: offLine (1): Indicates that the X25 Convergence SAP this route is asso… |