Identifies the address of this controller unit.
The address has to be unique for a specified sap.
Parsed from file CXBSC.MIB.txt
Company: None
Module: CXBsc-MIB
Identifies the address of this controller unit.
The address has to be unique for a specified sap.
Parsed from file CXBsc-MIB.mib
Module: CXBsc-MIB
Vendor: Memotec Communications
Module: CXBsc-MIB
[Automatically extracted from oidview.com]
bscCuNumber OBJECT-TYPE SYNTAX BscCuIndex ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the address of this controller unit. The address has to be unique for a specified sap." ::= { bscCuEntry 2 }
bscCuNumber OBJECT-TYPE SYNTAX BscCuIndex ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the address of this controller unit. The address has to be unique for a specified sap." ::= { bscCuEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.495.2.1.6.56.11.1.1 | bscCuSapNumber | 0 | 0 | Identifies the sap associated with this controller unit. Each controller unit has an address and the address has to be unique wi… |
1.3.6.1.4.1.495.2.1.6.56.11.1.3 | bscCuRowStatus | 0 | 0 | Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be crea… |
1.3.6.1.4.1.495.2.1.6.56.11.1.4 | bscCuHwdType | 0 | 0 | Identifies the controller unit type. |
1.3.6.1.4.1.495.2.1.6.56.11.1.5 | bscCuMaxBlockLength | 0 | 0 | Identifies the maximal length of the blocks exchanged between the host/terminal and the BSC module. The value is measured in oct… |
1.3.6.1.4.1.495.2.1.6.56.11.1.6 | bscCuPollTimeout | 0 | 0 | Identifies the number of seconds a station waits for an answer. The value is measured in tenth of seconds. |
1.3.6.1.4.1.495.2.1.6.56.11.1.7 | bscCuDelayTimer | 0 | 0 | Identifies the number of seconds the emulated station may delay the sending of a block. Timer is in tenth of seconds. |
1.3.6.1.4.1.495.2.1.6.56.11.1.8 | bscCuRetryCounter | 0 | 0 | Identifies the number of retries are executed, before a command fails. It is used by the host/terminal and the BSC layer. |
1.3.6.1.4.1.495.2.1.6.56.11.1.9 | bscCuETBAck | 0 | 0 | Identifies if the acknowledgement is local or end to end for ETBs. The ETB is a trailer block delimitator.. The 'endToEnd' means … |
1.3.6.1.4.1.495.2.1.6.56.11.1.10 | bscCuETXAck | 0 | 0 | Identifies if the acknowledgement is local or end to end for ETXs. The ETX is a trailer command delimitator.. The 'endToEnd' mean… |
1.3.6.1.4.1.495.2.1.6.56.11.1.20 | bscCuControl | 0 | 0 | Control associated with the specified service access point. |
1.3.6.1.4.1.495.2.1.6.56.11.1.30 | bscCuOperationalMode | 0 | 0 | Identifies the service access point as being active or non-active with the new configuration. |
1.3.6.1.4.1.495.2.1.6.56.11.1.31 | bscCuConnectionStatus | 0 | 0 | Indicates the X25 connection status of this link. |
1.3.6.1.4.1.495.2.1.6.56.11.1.45 | bscCuConnectRequest | 0 | 0 | Number of connection requests coming from the upper SNALC layer. |
1.3.6.1.4.1.495.2.1.6.56.11.1.46 | bscCuDisconnectRequest | 0 | 0 | Number of disconnection requests coming from the upper SNALC layer. |
1.3.6.1.4.1.495.2.1.6.56.11.1.47 | bscCuDisconnectIndication | 0 | 0 | Number of disconnections sent to the upper SNALC layer. |
1.3.6.1.4.1.495.2.1.6.56.11.1.48 | bscCuEndToEndConnectCnf | 0 | 0 | Number of end-to-end connections seen by the controller. Message sent by the Snalc. |
1.3.6.1.4.1.495.2.1.6.56.11.1.49 | bscCuSnalcRxRnr | 0 | 0 | Number of RNR 's received from the SNALC module due to X.25 or LLC2 flow control. |
1.3.6.1.4.1.495.2.1.6.56.11.1.50 | bscCuSnalcRxRr | 0 | 0 | Number of RR 's received from the SNALC module due to X.25 or LLC2 flow control. |