Identifies the maximal length of the blocks exchanged
between the host/terminal and the BSC module. The value is
measured in octets and is specified by the BSC protocol.
The DEFVAL value will be 'block3000' or 'block256',
depending if the sap is configurated as 'hostInterfaceUnit'
or 'terminalInterfaceUnit' (see the object 'bscSapInterfaceType').
Parsed from file CXBSC.MIB.txt
Company: None
Module: CXBsc-MIB
Identifies the maximal length of the blocks exchanged
between the host/terminal and the BSC module. The value is
measured in octets and is specified by the BSC protocol.
The DEFVAL value will be 'block3000' or 'block256',
depending if the sap is configurated as 'hostInterfaceUnit'
or 'terminalInterfaceUnit' (see the object 'bscSapInterfaceType').
Parsed from file CXBsc-MIB.mib
Module: CXBsc-MIB
Vendor: Memotec Communications
Module: CXBsc-MIB
[Automatically extracted from oidview.com]
bscCuMaxBlockLength OBJECT-TYPE SYNTAX BscBlockSize ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the maximal length of the blocks exchanged between the host/terminal and the BSC module. The value is measured in octets and is specified by the BSC protocol. The DEFVAL value will be 'block3000' or 'block256', depending if the sap is configurated as 'hostInterfaceUnit' or 'terminalInterfaceUnit' (see the object 'bscSapInterfaceType'). " DEFVAL { block256} ::= { bscCuEntry 5 }
bscCuMaxBlockLength OBJECT-TYPE SYNTAX BscBlockSize ACCESS read-write STATUS mandatory DESCRIPTION "Identifies the maximal length of the blocks exchanged between the host/terminal and the BSC module. The value is measured in octets and is specified by the BSC protocol. The DEFVAL value will be 'block3000' or 'block256', depending if the sap is configurated as 'hostInterfaceUnit' or 'terminalInterfaceUnit' (see the object 'bscSapInterfaceType'). " DEFVAL { block256} ::= { bscCuEntry 5 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.56.11.1.1 | bscCuSapNumber | 0 | 0 | Identifies the sap associated with this controller unit. Each controller unit has an address and the address has to be unique wi… |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.2 | bscCuNumber | 0 | 0 | Identifies the address of this controller unit. The address has to be unique for a specified sap. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.3 | bscCuRowStatus | 0 | 0 | Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be crea… |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.4 | bscCuHwdType | 0 | 0 | Identifies the controller unit type. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.6 | bscCuPollTimeout | 0 | 0 | Identifies the number of seconds a station waits for an answer. The value is measured in tenth of seconds. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.7 | bscCuDelayTimer | 0 | 0 | Identifies the number of seconds the emulated station may delay the sending of a block. Timer is in tenth of seconds. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.8 | bscCuRetryCounter | 0 | 0 | Identifies the number of retries are executed, before a command fails. It is used by the host/terminal and the BSC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.9 | bscCuETBAck | 0 | 0 | Identifies if the acknowledgement is local or end to end for ETBs. The ETB is a trailer block delimitator.. The 'endToEnd' means … |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.10 | bscCuETXAck | 0 | 0 | Identifies if the acknowledgement is local or end to end for ETXs. The ETX is a trailer command delimitator.. The 'endToEnd' mean… |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.20 | bscCuControl | 0 | 0 | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.30 | bscCuOperationalMode | 0 | 0 | Identifies the service access point as being active or non-active with the new configuration. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.31 | bscCuConnectionStatus | 0 | 0 | Indicates the X25 connection status of this link. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.45 | bscCuConnectRequest | 0 | 0 | Number of connection requests coming from the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.46 | bscCuDisconnectRequest | 0 | 0 | Number of disconnection requests coming from the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.47 | bscCuDisconnectIndication | 0 | 0 | Number of disconnections sent to the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.48 | bscCuEndToEndConnectCnf | 0 | 0 | Number of end-to-end connections seen by the controller. Message sent by the Snalc. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.49 | bscCuSnalcRxRnr | 0 | 0 | Number of RNR 's received from the SNALC module due to X.25 or LLC2 flow control. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.50 | bscCuSnalcRxRr | 0 | 0 | Number of RR 's received from the SNALC module due to X.25 or LLC2 flow control. |