Supports the action of soft resetting the unit.
When this object is set to reset(2), then the unit
performs a soft reset, whose meaning is specific to
the type of unit being managed. The value of norm(1)
will be returned when the reset is complete.
The value of norm(1) can not be set by management.
SCinstance: [L]ine=1-5 [i]nterface=0
Parsed from file gdc7624.mib.txt
Company: None
Module: GDCUAS7624-MIB
Supports the action of soft resetting the unit.
When this object is set to reset(2), then the unit
performs a soft reset, whose meaning is specific to
the type of unit being managed. The value of norm(1)
will be returned when the reset is complete.
The value of norm(1) can not be set by management.
SCinstance: [L]ine=1-5 [i]nterface=0
Parsed from file GDCUAS7624-MIB.mib
Module: GDCUAS7624-MIB
uas7624SoftReset OBJECT-TYPE SYNTAX INTEGER { norm(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose meaning is specific to the type of unit being managed. The value of norm(1) will be returned when the reset is complete. The value of norm(1) can not be set by management. SCinstance: [L]ine=1-5 [i]nterface=0" ::= { uas7624MaintenanceEntry 2 }
Vendor: General DataComm, Inc.
Module: GDCUAS7624-MIB
[Automatically extracted from oidview.com]
uas7624SoftReset OBJECT-TYPE SYNTAX INTEGER { norm(1), reset(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose meaning is specific to the type of unit being managed. The value of norm(1) will be returned when the reset is complete. The value of norm(1) can not be set by management. SCinstance: [L]ine=1-5 [i]nterface=0" ::= { uas7624MaintenanceEntry 2 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.18.1.2.1.1.1 | uas7624MaintenanceLineIndex | 0 | 0 | Integer value which uniquely identifies the uas7624 to which this entry is applicable. See DESCRIPTION's below for ranges. |
| 1.3.6.1.4.1.498.18.1.2.1.1.3 | uas7624DefaultInit | 0 | 0 | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefau… |
| 1.3.6.1.4.1.498.18.1.2.1.1.4 | uas7624ResetMajorAlarm | 0 | 0 | This variable is used. SCinstance: [L]ine=1-4 [i]nterface=1-3 |
| 1.3.6.1.4.1.498.18.1.2.1.1.5 | uas7624ResetMinorAlarm | 0 | 0 | This variable is used. SCinstance: [L]ine=1-4 [i]nterface=1-3 |
| 1.3.6.1.4.1.498.18.1.2.1.1.6 | uas7624ResetStatistics | 0 | 0 | This variable is used to reset the performance intervals. When it is set to reset, the performance tables and uas7624Valid interv… |
| 1.3.6.1.4.1.498.18.1.2.1.1.7 | uas7624StatLastInitialized | 0 | 0 | The elapsed time since the statistics were last initialized. This will be zero'd when uas7624ResetStatistics is reset(2). SCinsta… |
| 1.3.6.1.4.1.498.18.1.2.1.1.8 | uas7624ValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 96 for the T1 interface and 16 for th… |
| 1.3.6.1.4.1.498.18.1.2.1.1.9 | uas7624SysUpTime | 0 | 0 | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to … |
| 1.3.6.1.4.1.498.18.1.2.1.1.10 | uas7624LedStatus | 0 | 0 | Returns a bitwise snapshot of the front panel LED state. based on the Line: For SCinstance: [L]ine=1-4 [i]nterface=0 key 01 = S… |
| 1.3.6.1.4.1.498.18.1.2.1.1.11 | uas7624AlarmStatus | 0 | 0 | Returns a bit-wise Status of alarms with both masked and unmasked. For SCinstance: [L]ine=1-4 [i]nterface=0 1.7 - f/u 1.6 - Powe… |
| 1.3.6.1.4.1.498.18.1.2.1.1.12 | uas7624LoopState | 0 | 0 | A setting of inhibit(1) stops operation on the loop and a setting of enable(2) starts operation on the loop. SCinstance: [L]ine=1-… |
| 1.3.6.1.4.1.498.18.1.2.1.1.13 | uas7624ConfigMode | 0 | 0 | This variable is used to report the mode, either soft or hard, of the the uas7624. If the unit is in hard mode then the options … |