Reference record for OID 1.3.6.1.4.1.498.2.1.1.9


parent
1.3.6.1.4.1.498.2.1.1 (csuConfigEntry)
node code
9
node name
csuAISLoopdown
dot oid
1.3.6.1.4.1.498.2.1.1.9
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) gdc(498) csu(2) csuConfigTable(1) csuConfigEntry(1) csuAISLoopdown(9)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) csu(2) csuConfigTable(1) csuConfigEntry(1) csuAISLoopdown(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) gdc(498) csu(2) csuConfigTable(1) csuConfigEntry(1) csuAISLoopdown(9)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) csu(2) csuConfigTable(1) csuConfigEntry(1) csuAISLoopdown(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) gdc(498) csu(2) csuConfigTable(1) csuConfigEntry(1) csuAISLoopdown(9)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) csu(2) csuConfigTable(1) csuConfigEntry(1) csuAISLoopdown(9)}
    • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/gdc/csu/csuConfigTable/csuConfigEntry/csuAISLoopdown
  • /iso/identified-organization/dod/internet/private/enterprises/gdc/csu/csuConfigTable/csuConfigEntry/csuAISLoopdown
  • /iso/org/dod/internet/private/enterprise/gdc/csu/csuConfigTable/csuConfigEntry/csuAISLoopdown
  • /iso/org/dod/internet/private/enterprises/gdc/csu/csuConfigTable/csuConfigEntry/csuAISLoopdown
  • /iso/iso-identified-organization/dod/internet/private/enterprise/gdc/csu/csuConfigTable/csuConfigEntry/csuAISLoopdown
  • /iso/iso-identified-organization/dod/internet/private/enterprises/gdc/csu/csuConfigTable/csuConfigEntry/csuAISLoopdown
    • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/498/2/1/1/9

    Description by mibdepot

    This variable is used to set the AIS Loop-Down option
    for remotely-initiated DS1 loopbacks.

    4, inhibit, refers to when a continuous received AIS
    does not terminate the loopback.

    5-60, enable, refers to when a continuous received AIS
    terminates the loopback. The value is used to determine
    the loop-down activation time in seconds.
    GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS
    552a-1 AIS Loopdown inhibit, Enable-30seconds, Enable- seconds
    552a AIS Loopdown inhibit, Enable-30seconds, Enable- seconds
    552a V1.1 AIS Loopdown inhibit, Enable-30seconds, Enable- seconds
    551 None

    Parsed from file gdcds1.mib.txt
    Company: None
    Module: GDCDS1-MIB

    Description by circitor

    This variable is used to set the AIS Loop-Down option
    for remotely-initiated DS1 loopbacks.

    4, inhibit, refers to when a continuous received AIS
    does not terminate the loopback.

    5-60, enable, refers to when a continuous received AIS
    terminates the loopback. The value is used to determine
    the loop-down activation time in seconds.
    GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS
    552a-1 AIS Loopdown inhibit, Enable-30seconds, Enable- seconds
    552a AIS Loopdown inhibit, Enable-30seconds, Enable- seconds
    552a V1.1 AIS Loopdown inhibit, Enable-30seconds, Enable- seconds
    551 None

    Parsed from file GDCDS1-MIB.mib
    Module: GDCDS1-MIB

    Information by mibdepot

    csuAISLoopdown OBJECT-TYPE
		SYNTAX	INTEGER (4..60)
		ACCESS	read-write
		STATUS	mandatory
		DESCRIPTION
			"This variable is used to set the AIS Loop-Down option
			for remotely-initiated DS1 loopbacks.

			4, inhibit, refers to when a continuous received AIS
			does not terminate the loopback.

			5-60, enable, refers to when a continuous received AIS
			terminates the loopback. The value is used to determine
			the loop-down activation time in seconds.
GDCPRODUCT	EQUIVALENT	POSSIBLESELECTIONS
552a-1		AIS Loopdown	inhibit, Enable-30seconds, Enable- seconds
552a		AIS Loopdown	inhibit, Enable-30seconds, Enable- seconds
552a V1.1	AIS Loopdown	inhibit, Enable-30seconds, Enable- seconds
551		None"
		::= { csuConfigEntry 9 }

    Information by oid_info

    Vendor: General DataComm, Inc.
    Module: GDCDS1-MIB

    [Automatically extracted from oidview.com]

    Information by circitor

    csuAISLoopdown OBJECT-TYPE
		SYNTAX	INTEGER (4..60)
		ACCESS	read-write
		STATUS	mandatory
		DESCRIPTION
			"This variable is used to set the AIS Loop-Down option
			for remotely-initiated DS1 loopbacks.

			4, inhibit, refers to when a continuous received AIS
			does not terminate the loopback.

			5-60, enable, refers to when a continuous received AIS
			terminates the loopback. The value is used to determine
			the loop-down activation time in seconds.
GDCPRODUCT	EQUIVALENT	POSSIBLESELECTIONS
552a-1		AIS Loopdown	inhibit, Enable-30seconds, Enable- seconds
552a		AIS Loopdown	inhibit, Enable-30seconds, Enable- seconds
552a V1.1	AIS Loopdown	inhibit, Enable-30seconds, Enable- seconds
551		None"
		::= { csuConfigEntry 9 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.498)

    Meltzer William

    Brothers (14)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.498.2.1.1.1 csuConfigLineIndex 0 0 This object is the identifier of a DS1 interface on
    a managed object. It is used to associate the DS1
    Configuration Group in the …
    1.3.6.1.4.1.498.2.1.1.2 csuOnesDensity 0 0 This variable is used to indicate the pulse density
    on the network side.

    inhibit refers to no minimum pulse density

    csuMax15Zeros …
    1.3.6.1.4.1.498.2.1.1.3 csuFrontPanel 0 0 This variable is used to indicate whether the front
    panel switches are operational or not.

    inhibit refers to when the front panel…
    1.3.6.1.4.1.498.2.1.1.4 csuInbandLoop 0 0 This variable is used to set the
    In-Band DS1 Loopback Code Detection.

    inhibit refers to when the in-band
    loopback codes are ignore…
    1.3.6.1.4.1.498.2.1.1.5 csuILBFrame 0 0 This variable is used to set the In-Band DS1
    Loopback Code Framing option.

    unframed refers to the DSU transmitting unframed in-ba…
    1.3.6.1.4.1.498.2.1.1.6 csuLineBuildOutCtrl 0 0 This variable is used to set the Network Line
    Build-Out control option for the network side.

    Man refers to manually setting the N…
    1.3.6.1.4.1.498.2.1.1.7 csuLineBuildOutValue 0 0 This variable is used to set the Network Line
    Build-Out value on the network side.

    In manual mode, these values can be written an…
    1.3.6.1.4.1.498.2.1.1.8 csuLineTypeCtrl 0 0 This variable is used to set the Line Type
    control.

    None refers to the unframed mode of the DC551.

    Man refers to manually setting …
    1.3.6.1.4.1.498.2.1.1.10 csuPreEqualizer 0 0 This variable is used to set the Cascade
    PreEqualization option for matching the cascade port
    line length, providing transmitter …
    1.3.6.1.4.1.498.2.1.1.11 csuInitialize 0 0 This variable is used to initialize specific items on
    the csu,

    csuAlarmHistory refers to initializing the
    Alarm History Report and…
    1.3.6.1.4.1.498.2.1.1.12 csuTime 0 0 This variable is used to set the time for the real-time
    clock located on the network element. The string is
    fixed at a length of …
    1.3.6.1.4.1.498.2.1.1.13 csuDate 0 0 This variable is used to set the date for the real-time
    clock located on the network element. The string is
    fixed at a length of …
    1.3.6.1.4.1.498.2.1.1.14 csuTestType 0 0 This variable is used to set the network side
    DS1 loop type. If csuLLB is set, a line loop is
    done when the proper inband loop p…
    1.3.6.1.4.1.498.2.1.1.15 csuReceiveLevel 0 0 This variable is used to display the current
    receive level as reported by the Receive Level
    screen.
    GDCPRODUCT EQUIVALENT POSSIBL…