This value is used by the csu if the value of
csuChanRate is a multiple of both 56 & 64. This
value is not used if dsx1FracNumber is used to
configure the csu. In that case dsx1LineCoding
will determine the channel rate if there is a
common multiple.
write to this variable:
1) snmp set
2) dividing csuChanRate by the number of ds0s
found in dsx1FracNumber
read from this variable:
1) dividing csuChanRate by the number of ds0s
found in dsx1FracNumber
Parsed from file gdcds1.mib.txt
Company: None
Module: GDCDS1-MIB
This value is used by the csu if the value of
csuChanRate is a multiple of both 56 & 64. This
value is not used if dsx1FracNumber is used to
configure the csu. In that case dsx1LineCoding
will determine the channel rate if there is a
common multiple.
write to this variable:
1) snmp set
2) dividing csuChanRate by the number of ds0s
found in dsx1FracNumber
read from this variable:
1) dividing csuChanRate by the number of ds0s
found in dsx1FracNumber
Parsed from file GDCDS1-MIB.mib
Module: GDCDS1-MIB
csuChan6456 OBJECT-TYPE SYNTAX INTEGER { mode56(1), mode64(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This value is used by the csu if the value of csuChanRate is a multiple of both 56 & 64. This value is not used if dsx1FracNumber is used to configure the csu. In that case dsx1LineCoding will determine the channel rate if there is a common multiple. write to this variable: 1) snmp set 2) dividing csuChanRate by the number of ds0s found in dsx1FracNumber read from this variable: 1) dividing csuChanRate by the number of ds0s found in dsx1FracNumber" ::= { csuChanConfigEntry 12 }
Vendor: General DataComm, Inc.
Module: GDCDS1-MIB
[Automatically extracted from oidview.com]
csuChan6456 OBJECT-TYPE SYNTAX INTEGER { mode56(1), mode64(2) } ACCESS read-write STATUS mandatory DESCRIPTION " This value is used by the csu if the value of csuChanRate is a multiple of both 56 & 64. This value is not used if dsx1FracNumber is used to configure the csu. In that case dsx1LineCoding will determine the channel rate if there is a common multiple. write to this variable: 1) snmp set 2) dividing csuChanRate by the number of ds0s found in dsx1FracNumber read from this variable: 1) dividing csuChanRate by the number of ds0s found in dsx1FracNumber" ::= { csuChanConfigEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.2.2.1.12.0 | csuChan6456 | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.2.2.1.1 | csuChanConfigLineIndex | 0 | 0 | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the … |
| 1.3.6.1.4.1.498.2.2.1.2 | csuChanConfigNum | 0 | 0 | This variable is used to link the Fractional Group from RFC1406 to its GDC configuration. It is linked by the FracIfIndex in the … |
| 1.3.6.1.4.1.498.2.2.1.3 | csuStartDS0 | 0 | 0 | This variable is used to set the Starting DS0 Number option for the selected channel to 0 to 24, defining where the selected band… |
| 1.3.6.1.4.1.498.2.2.1.4 | csuRTSCTS | 0 | 0 | This variable is used to set the CTS operation option for the selected channel. csuCTSDelayed refers to CTS responding to RTS afte… |
| 1.3.6.1.4.1.498.2.2.1.5 | csuControlModeIdle | 0 | 0 | This variable is used to set the CMI Signalling option for the selected channel. off refers to when the CMI signalling is disable… |
| 1.3.6.1.4.1.498.2.2.1.6 | csuRDLInbandCode | 0 | 0 | This variable is used to set the Remote Digital Loop Pattern option for the selected channel. csuFixed refers to a proprietary 7-… |
| 1.3.6.1.4.1.498.2.2.1.7 | csuChanRate | 0 | 0 | This variable is used to setup the channel rate used by the DSU to calculate the number of DS0s, or bandwidth, required for the c… |
| 1.3.6.1.4.1.498.2.2.1.8 | csuAlternateDS0 | 0 | 0 | This variable is used to set the Alternate DS0 option. off refers to channel data that is carried in consecutive blocks of DS0s a… |
| 1.3.6.1.4.1.498.2.2.1.9 | csuRespondRDL | 0 | 0 | This variable is used to set the Channel RDL Response option. no refers to the channel ignores in-band loopback codes. yes refers … |
| 1.3.6.1.4.1.498.2.2.1.10 | csuInbandDLTimeout | 0 | 0 | This variable is used to set the Channel Digital Loop Timer option for remotely-initiated Channel Digital Loop tests. inhibit refe… |
| 1.3.6.1.4.1.498.2.2.1.11 | csuChanStatus | 0 | 0 | This variable is used to read the status of the channel. Each bit in the csuChanStatus indicates some status information. NoAlarm … |