This variable is used to set the Starting DS0 Number
option for the selected channel to 0 to 24, defining
where the selected bandwidth begins. The number of DS0s
used (the DS0 bundle) depends on the equipment data
rate and whether the network accommodates Nx56 kbps
DS0s or Nx64 kbps 'Clear Channel' DS0s, and is
calculated automatically by the DSU after entering
the starting DS0.
GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS
552a-1 Starting DS0 Same as defined in managed object
552a Starting DS0 Same as defined in managed object
552a V1.1 Starting DS0 Same as defined in managed object
551 None
Parsed from file gdcds1.mib.txt
Company: None
Module: GDCDS1-MIB
This variable is used to set the Starting DS0 Number
option for the selected channel to 0 to 24, defining
where the selected bandwidth begins. The number of DS0s
used (the DS0 bundle) depends on the equipment data
rate and whether the network accommodates Nx56 kbps
DS0s or Nx64 kbps 'Clear Channel' DS0s, and is
calculated automatically by the DSU after entering
the starting DS0.
GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS
552a-1 Starting DS0 Same as defined in managed object
552a Starting DS0 Same as defined in managed object
552a V1.1 Starting DS0 Same as defined in managed object
551 None
Parsed from file GDCDS1-MIB.mib
Module: GDCDS1-MIB
csuStartDS0 OBJECT-TYPE SYNTAX INTEGER (1..24) ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to set the Starting DS0 Number option for the selected channel to 0 to 24, defining where the selected bandwidth begins. The number of DS0s used (the DS0 bundle) depends on the equipment data rate and whether the network accommodates Nx56 kbps DS0s or Nx64 kbps 'Clear Channel' DS0s, and is calculated automatically by the DSU after entering the starting DS0. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Starting DS0 Same as defined in managed object 552a Starting DS0 Same as defined in managed object 552a V1.1 Starting DS0 Same as defined in managed object 551 None" ::= { csuChanConfigEntry 3 }
Vendor: General DataComm, Inc.
Module: GDCDS1-MIB
[Automatically extracted from oidview.com]
csuStartDS0 OBJECT-TYPE SYNTAX INTEGER (1..24) ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used to set the Starting DS0 Number option for the selected channel to 0 to 24, defining where the selected bandwidth begins. The number of DS0s used (the DS0 bundle) depends on the equipment data rate and whether the network accommodates Nx56 kbps DS0s or Nx64 kbps 'Clear Channel' DS0s, and is calculated automatically by the DSU after entering the starting DS0. GDCPRODUCT EQUIVALENT POSSIBLESELECTIONS 552a-1 Starting DS0 Same as defined in managed object 552a Starting DS0 Same as defined in managed object 552a V1.1 Starting DS0 Same as defined in managed object 551 None" ::= { csuChanConfigEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.2.2.1.1 | csuChanConfigLineIndex | 0 | 0 | This object is the identifier of a DS1 interface on a managed object. It is used to associate the DS1 Configuration Group in the … |
| 1.3.6.1.4.1.498.2.2.1.2 | csuChanConfigNum | 0 | 0 | This variable is used to link the Fractional Group from RFC1406 to its GDC configuration. It is linked by the FracIfIndex in the … |
| 1.3.6.1.4.1.498.2.2.1.4 | csuRTSCTS | 0 | 0 | This variable is used to set the CTS operation option for the selected channel. csuCTSDelayed refers to CTS responding to RTS afte… |
| 1.3.6.1.4.1.498.2.2.1.5 | csuControlModeIdle | 0 | 0 | This variable is used to set the CMI Signalling option for the selected channel. off refers to when the CMI signalling is disable… |
| 1.3.6.1.4.1.498.2.2.1.6 | csuRDLInbandCode | 0 | 0 | This variable is used to set the Remote Digital Loop Pattern option for the selected channel. csuFixed refers to a proprietary 7-… |
| 1.3.6.1.4.1.498.2.2.1.7 | csuChanRate | 0 | 0 | This variable is used to setup the channel rate used by the DSU to calculate the number of DS0s, or bandwidth, required for the c… |
| 1.3.6.1.4.1.498.2.2.1.8 | csuAlternateDS0 | 0 | 0 | This variable is used to set the Alternate DS0 option. off refers to channel data that is carried in consecutive blocks of DS0s a… |
| 1.3.6.1.4.1.498.2.2.1.9 | csuRespondRDL | 0 | 0 | This variable is used to set the Channel RDL Response option. no refers to the channel ignores in-band loopback codes. yes refers … |
| 1.3.6.1.4.1.498.2.2.1.10 | csuInbandDLTimeout | 0 | 0 | This variable is used to set the Channel Digital Loop Timer option for remotely-initiated Channel Digital Loop tests. inhibit refe… |
| 1.3.6.1.4.1.498.2.2.1.11 | csuChanStatus | 0 | 0 | This variable is used to read the status of the channel. Each bit in the csuChanStatus indicates some status information. NoAlarm … |
| 1.3.6.1.4.1.498.2.2.1.12 | csuChan6456 | 1 | 1 | This value is used by the csu if the value of csuChanRate is a multiple of both 56 & 64. This value is not used if dsx1FracNumber… |