Reference record for OID 1.3.6.1.4.1.498.3.6.2


parent
1.3.6.1.4.1.498.3.6 (scmSystem)
node code
2
node name
scmMaster
dot oid
1.3.6.1.4.1.498.3.6.2
type
OBJECT IDENTIFIER
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) gdc(498) sc(3) scmSystem(6) scmMaster(2)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) sc(3) scmSystem(6) scmMaster(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) gdc(498) sc(3) scmSystem(6) scmMaster(2)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) sc(3) scmSystem(6) scmMaster(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) gdc(498) sc(3) scmSystem(6) scmMaster(2)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) gdc(498) sc(3) scmSystem(6) scmMaster(2)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/gdc/sc/scmSystem/scmMaster
  • /iso/identified-organization/dod/internet/private/enterprises/gdc/sc/scmSystem/scmMaster
  • /iso/org/dod/internet/private/enterprise/gdc/sc/scmSystem/scmMaster
  • /iso/org/dod/internet/private/enterprises/gdc/sc/scmSystem/scmMaster
  • /iso/iso-identified-organization/dod/internet/private/enterprise/gdc/sc/scmSystem/scmMaster
  • /iso/iso-identified-organization/dod/internet/private/enterprises/gdc/sc/scmSystem/scmMaster
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/498/3/6/2

    Information by mibdepot

    scmMaster OBJECT IDENTIFIER ::= { scmSystem 2 }

    Information by oid_info

    Vendor: General DataComm, Inc.
    Module: GDCSCM-MIB

    [Automatically extracted from oidview.com]

    Information by circitor

    scmMaster OBJECT IDENTIFIER ::= { scmSystem 2 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.498)

    Meltzer William

    Children (18)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.498.3.6.2.1 scmMasterTimeout 1 1 The Management bus timeout defined as the time
    between the last character being transmitted
    to the Network Element and the first …
    1.3.6.1.4.1.498.3.6.2.2 scmAlarmScan 1 1 This is used to turn on and off the alarm scan feature
    to the Network Elements connected off of this SCM. If the alarm
    scan is tu…
    1.3.6.1.4.1.498.3.6.2.3 scmTime 1 1 This is used to read or set the time of the real-time
    clock in the SCM. The format of the time will be
    hh:mm:ss. Where hh is th…
    1.3.6.1.4.1.498.3.6.2.4 scmDate 1 1 This is used to read or set the date of the real-time
    clock in the SCM. The format of the date will be
    mm-dd-yy. Where mm is mo…
    1.3.6.1.4.1.498.3.6.2.5 scmRedundant 1 1 This is used to read the current state of a SCM
    1.3.6.1.4.1.498.3.6.2.6 scmShelfNumber 1 1 This indicates the number of shelves in the system. If it
    is a one shelf system, then a maximum of 16 Network Elements
    (includin…
    1.3.6.1.4.1.498.3.6.2.7 scmReset 1 1 This is used to reset the SCM card in the shelf. The SCM will
    respond to the command and then perform the reset. During the
    tim…
    1.3.6.1.4.1.498.3.6.2.8 scmPowerAvail 1 1 This is used to determine the total amount of power available to the
    shelves.
    1.3.6.1.4.1.498.3.6.2.9 scmDefaultConfig 1 1 This is used to allow the NonVolatile Configuration to
    be set to a factory default state. The SCM will perform
    a reset to make t…
    1.3.6.1.4.1.498.3.6.2.10 scmPowerConsum 1 1 This is used to determine the amount of power consumed by all the
    managed network elements in the shelves managed by this SCM.
    1.3.6.1.4.1.498.3.6.2.11 scmCannedConfig 1 1 This reads the dip switches and reports the current
    canned configuration setting.
    1.3.6.1.4.1.498.3.6.2.12 scmSetNetworkElementRealTime 1 1 Number of seconds from midnight Dec 31, 1969.
    A set of this object will be broadcasted to every
    network element in the shelf.
    A ge…
    1.3.6.1.4.1.498.3.6.2.13 scmDownLoadCode 1 1 This object determines if TFTP (Trivial File Transfer Protocol)
    code downloading to the SCM or any NEs is permitted.
    When managem…
    1.3.6.1.4.1.498.3.6.2.14 scmOperatingMode 1 1 This object determines the operating mode of an SCM as it pertains to the management
    buss.
    Active - indicates the SCM is to posse…
    1.3.6.1.4.1.498.3.6.2.15 scmAliveTrapInterval 1 1 This object is used to set the time period, represented in minutes, in which the
    SCM will send an SNMP TRAP to the manager to in…
    1.3.6.1.4.1.498.3.6.2.16 scmRedundantTimeOut 1 1 This object is used to set the time period, represented in seconds, in which the
    redundant SCM will wait after not receiving exp…
    1.3.6.1.4.1.498.3.6.2.17 scmTelnet 1 1 This object determines if telnet to the SCM is permitted.
    When management sets disable(2) all attempts to telnet to the
    SCM will …
    1.3.6.1.4.1.498.3.6.2.18 scmTextAlarmTraps 1 1 This object changes the format of alarm traps from the
    managed network elements. If this object is set to
    disable then the SCM s…

    Brothers (6)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.498.3.6.1 scmVersion 3 6 None
    1.3.6.1.4.1.498.3.6.3 scmPowerSupplyTrap, scmNode 1 13 None
    1.3.6.1.4.1.498.3.6.4 scmShelf 1 4 None
    1.3.6.1.4.1.498.3.6.5 scmAlmTrap 0 0 None
    1.3.6.1.4.1.498.3.6.6 scmAlarmTextTrap, scmRedundancy 1 6 None
    1.3.6.1.4.1.498.3.6.7 scmAlarmText 1 1 The variable associated with scmAlarmTextTrap. A get
    will always return a null string.