The Management bus timeout defined as the time
between the last character being transmitted
to the Network Element and the first character
being received. This variable is defined in
milliSeconds.
The default timeout is 50.0 mS.
Parsed from file gdcscm_7.20.mib.txt
Company: None
Module: GDCSCM-MIB
The Management bus timeout defined as the time
between the last character being transmitted
to the Network Element and the first character
being received. This variable is defined in
milliSeconds.
The default timeout is 50.0 mS.
Parsed from file GDCSCM-MIB.mib
Module: GDCSCM-MIB
scmMasterTimeout OBJECT-TYPE SYNTAX INTEGER (15..100) ACCESS read-write STATUS mandatory DESCRIPTION "The Management bus timeout defined as the time between the last character being transmitted to the Network Element and the first character being received. This variable is defined in milliSeconds. The default timeout is 50.0 mS." ::= { scmMaster 1 }
Vendor: General DataComm, Inc.
Module: GDCSCM-MIB
[Automatically extracted from oidview.com]
scmMasterTimeout OBJECT-TYPE SYNTAX INTEGER (15..100) ACCESS read-write STATUS mandatory DESCRIPTION "The Management bus timeout defined as the time between the last character being transmitted to the Network Element and the first character being received. This variable is defined in milliSeconds. The default timeout is 50.0 mS." ::= { scmMaster 1 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.3.6.2.1.0 | scmMasterTimeout | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.3.6.2.2 | scmAlarmScan | 1 | 1 | This is used to turn on and off the alarm scan feature to the Network Elements connected off of this SCM. If the alarm scan is tu… |
| 1.3.6.1.4.1.498.3.6.2.3 | scmTime | 1 | 1 | This is used to read or set the time of the real-time clock in the SCM. The format of the time will be hh:mm:ss. Where hh is th… |
| 1.3.6.1.4.1.498.3.6.2.4 | scmDate | 1 | 1 | This is used to read or set the date of the real-time clock in the SCM. The format of the date will be mm-dd-yy. Where mm is mo… |
| 1.3.6.1.4.1.498.3.6.2.5 | scmRedundant | 1 | 1 | This is used to read the current state of a SCM |
| 1.3.6.1.4.1.498.3.6.2.6 | scmShelfNumber | 1 | 1 | This indicates the number of shelves in the system. If it is a one shelf system, then a maximum of 16 Network Elements (includin… |
| 1.3.6.1.4.1.498.3.6.2.7 | scmReset | 1 | 1 | This is used to reset the SCM card in the shelf. The SCM will respond to the command and then perform the reset. During the tim… |
| 1.3.6.1.4.1.498.3.6.2.8 | scmPowerAvail | 1 | 1 | This is used to determine the total amount of power available to the shelves. |
| 1.3.6.1.4.1.498.3.6.2.9 | scmDefaultConfig | 1 | 1 | This is used to allow the NonVolatile Configuration to be set to a factory default state. The SCM will perform a reset to make t… |
| 1.3.6.1.4.1.498.3.6.2.10 | scmPowerConsum | 1 | 1 | This is used to determine the amount of power consumed by all the managed network elements in the shelves managed by this SCM. |
| 1.3.6.1.4.1.498.3.6.2.11 | scmCannedConfig | 1 | 1 | This reads the dip switches and reports the current canned configuration setting. |
| 1.3.6.1.4.1.498.3.6.2.12 | scmSetNetworkElementRealTime | 1 | 1 | Number of seconds from midnight Dec 31, 1969. A set of this object will be broadcasted to every network element in the shelf. A ge… |
| 1.3.6.1.4.1.498.3.6.2.13 | scmDownLoadCode | 1 | 1 | This object determines if TFTP (Trivial File Transfer Protocol) code downloading to the SCM or any NEs is permitted. When managem… |
| 1.3.6.1.4.1.498.3.6.2.14 | scmOperatingMode | 1 | 1 | This object determines the operating mode of an SCM as it pertains to the management buss. Active - indicates the SCM is to posse… |
| 1.3.6.1.4.1.498.3.6.2.15 | scmAliveTrapInterval | 1 | 1 | This object is used to set the time period, represented in minutes, in which the SCM will send an SNMP TRAP to the manager to in… |
| 1.3.6.1.4.1.498.3.6.2.16 | scmRedundantTimeOut | 1 | 1 | This object is used to set the time period, represented in seconds, in which the redundant SCM will wait after not receiving exp… |
| 1.3.6.1.4.1.498.3.6.2.17 | scmTelnet | 1 | 1 | This object determines if telnet to the SCM is permitted. When management sets disable(2) all attempts to telnet to the SCM will … |
| 1.3.6.1.4.1.498.3.6.2.18 | scmTextAlarmTraps | 1 | 1 | This object changes the format of alarm traps from the managed network elements. If this object is set to disable then the SCM s… |