This command Controls the connection speed for Link
negotiations before upshift occurs between two MNP10
modems.
negoAtHighestSpeed Link negotiation occurs at Highest
supported speed
negoAt1200bps Link negotiation occurs at 1200bps,
used primarily for cellular links
negoAt4800bps Link negotiation occurs at 4800bps,
used primarily on average quality
Parsed from file vfast.mib.txt
Company: gdc
Module: GDCMDM-MIB
mdmMNPLinkNegoSpeed OBJECT-TYPE SYNTAX INTEGER { negoAtHighestSpeed (1), negoAt1200bps (2), negoAt4800bps (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This command Controls the connection speed for Link negotiations before upshift occurs between two MNP10 modems. negoAtHighestSpeed Link negotiation occurs at Highest supported speed negoAt1200bps Link negotiation occurs at 1200bps, used primarily for cellular links negoAt4800bps Link negotiation occurs at 4800bps, used primarily on average quality" ::= { mdmProtocolEntry 12 }
Vendor: GDC
Module: GDCMDM-MIB (gdcvfast.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.498.4.5.1.1 | mdmProtocolIndex | 0 | 0 | A unique index for the DTE Table. |
1.3.6.1.4.1.498.4.5.1.2 | mdmCompression | 0 | 0 | This command controls the Compression operation when operating in asynchronous mode. disabled No compression available. ena… |
1.3.6.1.4.1.498.4.5.1.3 | mdmAsyncProtocol | 0 | 0 | This command controls the Protocols available at the handshake. wire Options the modem to run in wire mode; copying cha… |
1.3.6.1.4.1.498.4.5.1.4 | mdmFlowControl | 0 | 0 | This command controls the flow control type between the modem and the DTE available at the handshake. disabled Disables mo… |
1.3.6.1.4.1.498.4.5.1.5 | mdmBreakHandling | 0 | 0 | This command controls the operation of breaks. expediteDest This option will immediately transmit a break character for a fix … |
1.3.6.1.4.1.498.4.5.1.6 | mdmConnAndLinkMessages | 0 | 0 | This command controls when to send the protocol messages. separateMessages This options the modem to send the standard GDC… |
1.3.6.1.4.1.498.4.5.1.7 | mdmErrorCorrection | 0 | 0 | This command controls how the data is handled when running a protocol. noBuffer This option discards all data coming in fr… |
1.3.6.1.4.1.498.4.5.1.8 | mdmV13Mode | 0 | 0 | This command controls the V13 function. bidirectional Selects bidirectional V.13 simulated controlled carrier. txEnable S… |
1.3.6.1.4.1.498.4.5.1.9 | mdmSyncProtocol | 0 | 0 | This command controls the type of sync protocol. normalsync Selects normal synchronous mode. v13sync Selects synchro… |
1.3.6.1.4.1.498.4.5.1.10 | mdmFrameRetransLimit | 0 | 0 | This command limits the number of times the modem will retransmit a frame while in an error correction connection. |
1.3.6.1.4.1.498.4.5.1.11 | mdmCellularPwrLvlAdjust | 0 | 0 | This command Enables or Disables the automatic adjustment of transmit power level to accommodate the signaling requirements of ce… |
1.3.6.1.4.1.498.4.5.1.13 | mdmMNP10Mode | 0 | 0 | This command Enables or Disables MNP10 mode disabled Disable MNP10 mode enabledInAnswerMode Enable MNP10 i… |
1.3.6.1.4.1.498.4.5.1.14 | mdmCellularPwrLevel | 0 | 0 | This command sets the initial transmit power level for upshift at connect until line conditions can be determined. Level can be se… |