This command controls how the data is handled
when running a protocol.
noBuffer This option discards all data coming in from
the modem until the receiver modem sends a
PROTOCOL: NONE message to the DTE at which
time data will be passed through.
bufferRxData This option will buffer received data
(up to 200 characters) until the
PROTOCOL: NONE message is sent. The buffered
data will be passed through to the DTE.
The modem will fall back to wire mode
if more than 200 characters have been
received prior to establishing an error
correction link.
fallbackWithFallbackChar This command discards all
incoming data until two consecutive fallback
characters are detected at which point the
receiver modem falls back to wire mode.
One fallback character is passed through to
its DTE as data.
fallbackV14Buffer This option acts the same as bufferRxData
except with no link it falls back to V.14
(direct)mode.
fallbackV14WithFallbackChar This option acts as
fallbackWithFallbackChar except it also
falls back to V.14 (direct) mode.
Parsed from file vfast.mib.txt
Company: None
Module: GDCMDM-MIB
This command controls how the data is handled
when running a protocol.
noBuffer This option discards all data coming in from
the modem until the receiver modem sends a
PROTOCOL: NONE message to the DTE at which
time data will be passed through.
bufferRxData This option will buffer received data
(up to 200 characters) until the
PROTOCOL: NONE message is sent. The buffered
data will be passed through to the DTE.
The modem will fall back to wire mode
if more than 200 characters have been
received prior to establishing an error
correction link.
fallbackWithFallbackChar This command discards all
incoming data until two consecutive fallback
characters are detected at which point the
receiver modem falls back to wire mode.
One fallback character is passed through to
its DTE as data.
fallbackV14Buffer This option acts the same as bufferRxData
except with no link it falls back to V.14
(direct)mode.
fallbackV14WithFallbackChar This option acts as
fallbackWithFallbackChar except it also
falls back to V.14 (direct) mode.
Parsed from file GDCMDM-MIB.mib
Module: GDCMDM-MIB
mdmErrorCorrection OBJECT-TYPE SYNTAX INTEGER { noBuffer(1), bufferRxData(2), fallbackWithFallbackChar(3), fallbackV14Buffer(4), fallbackV14WithFallbackChar(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This command controls how the data is handled when running a protocol. noBuffer This option discards all data coming in from the modem until the receiver modem sends a PROTOCOL: NONE message to the DTE at which time data will be passed through. bufferRxData This option will buffer received data (up to 200 characters) until the PROTOCOL: NONE message is sent. The buffered data will be passed through to the DTE. The modem will fall back to wire mode if more than 200 characters have been received prior to establishing an error correction link. fallbackWithFallbackChar This command discards all incoming data until two consecutive fallback characters are detected at which point the receiver modem falls back to wire mode. One fallback character is passed through to its DTE as data. fallbackV14Buffer This option acts the same as bufferRxData except with no link it falls back to V.14 (direct)mode. fallbackV14WithFallbackChar This option acts as fallbackWithFallbackChar except it also falls back to V.14 (direct) mode." ::= { mdmProtocolEntry 7 }
Vendor: General DataComm, Inc.
Module: GDCMDM-MIB
[Automatically extracted from oidview.com]
mdmErrorCorrection OBJECT-TYPE SYNTAX INTEGER { noBuffer(1), bufferRxData(2), fallbackWithFallbackChar(3), fallbackV14Buffer(4), fallbackV14WithFallbackChar(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This command controls how the data is handled when running a protocol. noBuffer This option discards all data coming in from the modem until the receiver modem sends a PROTOCOL: NONE message to the DTE at which time data will be passed through. bufferRxData This option will buffer received data (up to 200 characters) until the PROTOCOL: NONE message is sent. The buffered data will be passed through to the DTE. The modem will fall back to wire mode if more than 200 characters have been received prior to establishing an error correction link. fallbackWithFallbackChar This command discards all incoming data until two consecutive fallback characters are detected at which point the receiver modem falls back to wire mode. One fallback character is passed through to its DTE as data. fallbackV14Buffer This option acts the same as bufferRxData except with no link it falls back to V.14 (direct)mode. fallbackV14WithFallbackChar This option acts as fallbackWithFallbackChar except it also falls back to V.14 (direct) mode." ::= { mdmProtocolEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.4.5.1.1 | mdmProtocolIndex | 0 | 0 | A unique index for the DTE Table. |
| 1.3.6.1.4.1.498.4.5.1.2 | mdmCompression | 0 | 0 | This command controls the Compression operation when operating in asynchronous mode. disabled No compression available. ena… |
| 1.3.6.1.4.1.498.4.5.1.3 | mdmAsyncProtocol | 0 | 0 | This command controls the Protocols available at the handshake. wire Options the modem to run in wire mode; copying cha… |
| 1.3.6.1.4.1.498.4.5.1.4 | mdmFlowControl | 0 | 0 | This command controls the flow control type between the modem and the DTE available at the handshake. disabled Disables mo… |
| 1.3.6.1.4.1.498.4.5.1.5 | mdmBreakHandling | 0 | 0 | This command controls the operation of breaks. expediteDest This option will immediately transmit a break character for a fix … |
| 1.3.6.1.4.1.498.4.5.1.6 | mdmConnAndLinkMessages | 0 | 0 | This command controls when to send the protocol messages. separateMessages This options the modem to send the standard GDC… |
| 1.3.6.1.4.1.498.4.5.1.8 | mdmV13Mode | 0 | 0 | This command controls the V13 function. bidirectional Selects bidirectional V.13 simulated controlled carrier. txEnable S… |
| 1.3.6.1.4.1.498.4.5.1.9 | mdmSyncProtocol | 0 | 0 | This command controls the type of sync protocol. normalsync Selects normal synchronous mode. v13sync Selects synchro… |
| 1.3.6.1.4.1.498.4.5.1.10 | mdmFrameRetransLimit | 0 | 0 | This command limits the number of times the modem will retransmit a frame while in an error correction connection. |
| 1.3.6.1.4.1.498.4.5.1.11 | mdmCellularPwrLvlAdjust | 0 | 0 | This command Enables or Disables the automatic adjustment of transmit power level to accommodate the signaling requirements of ce… |
| 1.3.6.1.4.1.498.4.5.1.12 | mdmMNPLinkNegoSpeed | 0 | 0 | This command Controls the connection speed for Link negotiations before upshift occurs between two MNP10 modems. negoAtHighestSpee… |
| 1.3.6.1.4.1.498.4.5.1.13 | mdmMNP10Mode | 0 | 0 | This command Enables or Disables MNP10 mode disabled Disable MNP10 mode enabledInAnswerMode Enable MNP10 i… |
| 1.3.6.1.4.1.498.4.5.1.14 | mdmCellularPwrLevel | 0 | 0 | This command sets the initial transmit power level for upshift at connect until line conditions can be determined. Level can be se… |