Indicates if the units configured for primary or secondary
system clock are actually supplying clock and if it is the
8hkz, 4mhz, or both.
Valid [i]nterface = 1-2
Parsed from file gdc7022.mib.txt
Company: None
Module: GDCUAS7022-MIB
Indicates if the units configured for primary or secondary
system clock are actually supplying clock and if it is the
8hkz, 4mhz, or both.
Valid [i]nterface = 1-2
Parsed from file GDCUAS7022-MIB.mib
Module: GDCUAS7022-MIB
uas7022SystemTimingGenStatus OBJECT-TYPE SYNTAX INTEGER { none(1), clk8khz(2), clk4mhz(3), clk8khzand4mhz(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if the units configured for primary or secondary system clock are actually supplying clock and if it is the 8hkz, 4mhz, or both. Valid [i]nterface = 1-2" ::= { uas7022MaintenanceEntry 14 }
Vendor: General DataComm, Inc.
Module: GDCUAS7022-MIB
[Automatically extracted from oidview.com]
uas7022SystemTimingGenStatus OBJECT-TYPE SYNTAX INTEGER { none(1), clk8khz(2), clk4mhz(3), clk8khzand4mhz(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates if the units configured for primary or secondary system clock are actually supplying clock and if it is the 8hkz, 4mhz, or both. Valid [i]nterface = 1-2" ::= { uas7022MaintenanceEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.13.2.1.1.1 | uas7022MaintenanceLineIndex | 0 | 0 | Integer value which uniquely identifies the UAS7022 to which this entry is applicable. SCinstance is defined to be SLDi where: S … |
| 1.3.6.1.4.1.498.6.13.2.1.1.2 | uas7022SoftReset | 0 | 0 | Supports the action of soft resetting the unit. When this object is set to reset(2), then the unit performs a soft reset, whose … |
| 1.3.6.1.4.1.498.6.13.2.1.1.3 | uas7022SysUpTime | 0 | 0 | This variable is used to report the elapsed system tick time for conversion to real time at the controller and is not related to … |
| 1.3.6.1.4.1.498.6.13.2.1.1.4 | uas7022DefaultInit | 0 | 0 | This is used to allow the NonVolatile Configuration to be set to a factory default state. When this value is set to factoryDefau… |
| 1.3.6.1.4.1.498.6.13.2.1.1.5 | uas7022LedStatus | 0 | 0 | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - future use bit 5 - INSV bit 4 - RSP bit 3 … |
| 1.3.6.1.4.1.498.6.13.2.1.1.6 | uas7022AlarmStatus | 0 | 0 | Returns a bit-wise Status of alarms Octet 1 bit 7 - not used bit 6 - NIUA_LOS bit 5 - NIUA_LOF bit 4 - NIUA_AIS bit 3 - NIUA_LCV bit … |
| 1.3.6.1.4.1.498.6.13.2.1.1.7 | uas7022NearEndResetStats | 0 | 0 | Supports the action of soft resetting the uas7022NearEndValidIntervals object. When this object is set to reset(2), then the un… |
| 1.3.6.1.4.1.498.6.13.2.1.1.8 | uas7022FarEndResetStats | 0 | 0 | Supports the action of soft resetting the uas7022FarEndValidIntervals object. When this object is set to reset(2), then the uni… |
| 1.3.6.1.4.1.498.6.13.2.1.1.9 | uas7022NearEndStatLastInit | 0 | 0 | Number of seconds from midnight Dec 31, 1969 up until uas7022NearEndValidIntervals was last initialized to zero Valid [i]nterface… |
| 1.3.6.1.4.1.498.6.13.2.1.1.10 | uas7022FarEndStatLastInit | 0 | 0 | Number of seconds from midnight Dec 31, 1969 up until uas7022FarEndValidIntervals was last initialized to zero Valid [i]nterface … |
| 1.3.6.1.4.1.498.6.13.2.1.1.11 | uas7022NearEndValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought o… |
| 1.3.6.1.4.1.498.6.13.2.1.1.12 | uas7022FarEndValidIntervals | 0 | 0 | The number of previous intervals for which valid data was collected. The value will be 16 unless the interface was brought o… |
| 1.3.6.1.4.1.498.6.13.2.1.1.13 | uas7022NIUaCircuitID | 0 | 0 | This variable is used for general purpose storage. Valid [i]nterface = 1 |
| 1.3.6.1.4.1.498.6.13.2.1.1.15 | uas7022NIUbCircuitID | 0 | 0 | This variable is used for general purpose storage. Valid [i]nterface = 2 |