The mode of propagation of inband Diagnostics Communication Channel to
the dedicated remote NMS553 unit. None specifies no inband DCC. Embedded
is an allowed value when the mib object sc5553DS0BaseRate is set to Nx56K,
and specifies that DCC is propagated in the 8th bit of the assigned DS0's.
dccDs0 specifies that a DS0 is used for propagation of DCC, this value
would be selected if the sc5553DS0BaseRate is Nx64k (clear channel) since
all data bits are used for user data, a minimum of two DS0's must be
assigned to this device in this mode, the last ds0 should be set as the
sc5553DccDs0 when using this mode. The DS0 allocation may be read
from the mib object sc5553DS0Allocation.
Parsed from file gdc5553.mib.txt
Company: None
Module: GDC-5553-MIB
The mode of propagation of inband Diagnostics Communication Channel to
the dedicated remote NMS553 unit. None specifies no inband DCC. Embedded
is an allowed value when the mib object sc5553DS0BaseRate is set to Nx56K,
and specifies that DCC is propagated in the 8th bit of the assigned DS0's.
dccDs0 specifies that a DS0 is used for propagation of DCC, this value
would be selected if the sc5553DS0BaseRate is Nx64k (clear channel) since
all data bits are used for user data, a minimum of two DS0's must be
assigned to this device in this mode, the last ds0 should be set as the
sc5553DccDs0 when using this mode. The DS0 allocation may be read
from the mib object sc5553DS0Allocation.
Parsed from file GDC-5553-MIB.mib
Module: GDC-5553-MIB
sc5553InbandDccMode OBJECT-TYPE SYNTAX INTEGER { none(1), embedded(2), dccDs0(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode of propagation of inband Diagnostics Communication Channel to the dedicated remote NMS553 unit. None specifies no inband DCC. Embedded is an allowed value when the mib object sc5553DS0BaseRate is set to Nx56K, and specifies that DCC is propagated in the 8th bit of the assigned DS0's. dccDs0 specifies that a DS0 is used for propagation of DCC, this value would be selected if the sc5553DS0BaseRate is Nx64k (clear channel) since all data bits are used for user data, a minimum of two DS0's must be assigned to this device in this mode, the last ds0 should be set as the sc5553DccDs0 when using this mode. The DS0 allocation may be read from the mib object sc5553DS0Allocation." ::= { sc5553ConfigEntry 11 }
Vendor: General DataComm, Inc.
Module: GDC-5553-MIB
[Automatically extracted from oidview.com]
sc5553InbandDccMode OBJECT-TYPE SYNTAX INTEGER { none(1), embedded(2), dccDs0(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The mode of propagation of inband Diagnostics Communication Channel to the dedicated remote NMS553 unit. None specifies no inband DCC. Embedded is an allowed value when the mib object sc5553DS0BaseRate is set to Nx56K, and specifies that DCC is propagated in the 8th bit of the assigned DS0's. dccDs0 specifies that a DS0 is used for propagation of DCC, this value would be selected if the sc5553DS0BaseRate is Nx64k (clear channel) since all data bits are used for user data, a minimum of two DS0's must be assigned to this device in this mode, the last ds0 should be set as the sc5553DccDs0 when using this mode. The DS0 allocation may be read from the mib object sc5553DS0Allocation." ::= { sc5553ConfigEntry 11 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.5.3.1.1.1 | sc5553ConfigIndex | 0 | 0 | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.5.3.1.1.2 | sc5553ExternalTiming | 0 | 0 | Disabled indicates timing is provided by the 5553. Enabled indicates timing is provided by the customer business equipment |
| 1.3.6.1.4.1.498.6.5.3.1.1.3 | sc5553ChannelType | 0 | 0 | The channel interface type |
| 1.3.6.1.4.1.498.6.5.3.1.1.4 | sc5553ClockInvert | 0 | 0 | Clock invert option |
| 1.3.6.1.4.1.498.6.5.3.1.1.5 | sc5553DataInvert | 0 | 0 | Data invert option |
| 1.3.6.1.4.1.498.6.5.3.1.1.6 | sc5553ConstantDCD | 0 | 0 | Controls the operation of Data Carrier Detect (DCD) signal. |
| 1.3.6.1.4.1.498.6.5.3.1.1.7 | sc5553ConstantDSR | 0 | 0 | Controls the operation of the Data Set Ready (DSR) signal. |
| 1.3.6.1.4.1.498.6.5.3.1.1.8 | sc5553RTSCTScontrol | 0 | 0 | Controls the function of the channel's Request To Send and and Clear To Send signals used for flow control. ctsOn indicates that … |
| 1.3.6.1.4.1.498.6.5.3.1.1.9 | sc5553ExtLLCtrl | 0 | 0 | Enables/disables the ability to initiate a local loop test via the assertion of the EIA LL test lead at the DTE interface. |
| 1.3.6.1.4.1.498.6.5.3.1.1.10 | sc5553ExtRLCtrl | 0 | 0 | Enables/disables the ability to initiate a remote loop test via the assertion of the EIA RL test lead at the DTE interface. |
| 1.3.6.1.4.1.498.6.5.3.1.1.12 | sc5553InbandLoop | 0 | 0 | This object is also referred to as RDL response. When enabled (pn127), the channel will enter a remote data loopback when an inb… |
| 1.3.6.1.4.1.498.6.5.3.1.1.13 | sc5553InbandLoopdown | 0 | 0 | This object is also referred to as RDL Auto Timeout. When enabled (tenMinutes), the loopback will be automatically terminated by … |
| 1.3.6.1.4.1.498.6.5.3.1.1.14 | sc5553WakeUpRemote | 0 | 0 | This object is requested to initiate the add remote process. The serial number of the associated remote is returned. |