This object is also referred to as RDL Auto Timeout.
When enabled (tenMinutes), the loopback will be automatically terminated
by the unit after ten minutes. When disabled, the loopback must be
terminated by an in-band loopdown code.
Parsed from file gdc5553.mib.txt
Company: None
Module: GDC-5553-MIB
This object is also referred to as RDL Auto Timeout.
When enabled (tenMinutes), the loopback will be automatically terminated
by the unit after ten minutes. When disabled, the loopback must be
terminated by an in-band loopdown code.
Parsed from file GDC-5553-MIB.mib
Module: GDC-5553-MIB
sc5553InbandLoopdown OBJECT-TYPE SYNTAX INTEGER { disable(1), tenMinutes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is also referred to as RDL Auto Timeout. When enabled (tenMinutes), the loopback will be automatically terminated by the unit after ten minutes. When disabled, the loopback must be terminated by an in-band loopdown code." ::= { sc5553ConfigEntry 13}
Vendor: General DataComm, Inc.
Module: GDC-5553-MIB
[Automatically extracted from oidview.com]
sc5553InbandLoopdown OBJECT-TYPE SYNTAX INTEGER { disable(1), tenMinutes(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is also referred to as RDL Auto Timeout. When enabled (tenMinutes), the loopback will be automatically terminated by the unit after ten minutes. When disabled, the loopback must be terminated by an in-band loopdown code." ::= { sc5553ConfigEntry 13}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.5.3.1.1.1 | sc5553ConfigIndex | 0 | 0 | The index value: slot, line, drop, and interface |
| 1.3.6.1.4.1.498.6.5.3.1.1.2 | sc5553ExternalTiming | 0 | 0 | Disabled indicates timing is provided by the 5553. Enabled indicates timing is provided by the customer business equipment |
| 1.3.6.1.4.1.498.6.5.3.1.1.3 | sc5553ChannelType | 0 | 0 | The channel interface type |
| 1.3.6.1.4.1.498.6.5.3.1.1.4 | sc5553ClockInvert | 0 | 0 | Clock invert option |
| 1.3.6.1.4.1.498.6.5.3.1.1.5 | sc5553DataInvert | 0 | 0 | Data invert option |
| 1.3.6.1.4.1.498.6.5.3.1.1.6 | sc5553ConstantDCD | 0 | 0 | Controls the operation of Data Carrier Detect (DCD) signal. |
| 1.3.6.1.4.1.498.6.5.3.1.1.7 | sc5553ConstantDSR | 0 | 0 | Controls the operation of the Data Set Ready (DSR) signal. |
| 1.3.6.1.4.1.498.6.5.3.1.1.8 | sc5553RTSCTScontrol | 0 | 0 | Controls the function of the channel's Request To Send and and Clear To Send signals used for flow control. ctsOn indicates that … |
| 1.3.6.1.4.1.498.6.5.3.1.1.9 | sc5553ExtLLCtrl | 0 | 0 | Enables/disables the ability to initiate a local loop test via the assertion of the EIA LL test lead at the DTE interface. |
| 1.3.6.1.4.1.498.6.5.3.1.1.10 | sc5553ExtRLCtrl | 0 | 0 | Enables/disables the ability to initiate a remote loop test via the assertion of the EIA RL test lead at the DTE interface. |
| 1.3.6.1.4.1.498.6.5.3.1.1.11 | sc5553InbandDccMode | 0 | 0 | The mode of propagation of inband Diagnostics Communication Channel to the dedicated remote NMS553 unit. None specifies no inban… |
| 1.3.6.1.4.1.498.6.5.3.1.1.12 | sc5553InbandLoop | 0 | 0 | This object is also referred to as RDL response. When enabled (pn127), the channel will enter a remote data loopback when an inb… |
| 1.3.6.1.4.1.498.6.5.3.1.1.14 | sc5553WakeUpRemote | 0 | 0 | This object is requested to initiate the add remote process. The serial number of the associated remote is returned. |