The Alarm hysterysis time nms520AlarmHystTime, is used to control the
amount of time a remote must wait between reporting unsolicited alarm
conditions. A remote will send an unsolicited alarm response at the
time of the first alarm. If second alarm occurs the remote will wait
for the time specified by this object before it will send another alarm
response. This time applies for both point to point and multipoint
applications. The range is from 1 second to 127 seconds, with 10
seconds being the default value.
Parsed from file nms520.mib.txt
Company: None
Module: NMS520-MIB
The Alarm hysterysis time nms520AlarmHystTime, is used to control the
amount of time a remote must wait between reporting unsolicited alarm
conditions. A remote will send an unsolicited alarm response at the
time of the first alarm. If second alarm occurs the remote will wait
for the time specified by this object before it will send another alarm
response. This time applies for both point to point and multipoint
applications. The range is from 1 second to 127 seconds, with 10
seconds being the default value.
Parsed from file NMS520-MIB.mib
Module: NMS520-MIB
nms520AlarmHystTime OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The Alarm hysterysis time nms520AlarmHystTime, is used to control the amount of time a remote must wait between reporting unsolicited alarm conditions. A remote will send an unsolicited alarm response at the time of the first alarm. If second alarm occurs the remote will wait for the time specified by this object before it will send another alarm response. This time applies for both point to point and multipoint applications. The range is from 1 second to 127 seconds, with 10 seconds being the default value." ::= { nms520UnitCfgEntry 4 }
Vendor: General DataComm, Inc.
Module: NMS520-MIB
[Automatically extracted from oidview.com]
nms520AlarmHystTime OBJECT-TYPE SYNTAX INTEGER (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "The Alarm hysterysis time nms520AlarmHystTime, is used to control the amount of time a remote must wait between reporting unsolicited alarm conditions. A remote will send an unsolicited alarm response at the time of the first alarm. If second alarm occurs the remote will wait for the time specified by this object before it will send another alarm response. This time applies for both point to point and multipoint applications. The range is from 1 second to 127 seconds, with 10 seconds being the default value." ::= { nms520UnitCfgEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.8.2.2.1.1 | nms520UnitCfgIndex | 0 | 0 | The index value which uniquely identifies the NMS520 to which this entry is applicable. This has the form of a SCinstance which … |
| 1.3.6.1.4.1.498.8.2.2.1.2 | nms520Nms510CompatibilityMode | 0 | 0 | The NMS510 compatibility mode. This mode allows the NMS520 to behave in a manner compatible with that of the NMS510 in a DDSI mul… |
| 1.3.6.1.4.1.498.8.2.2.1.3 | nms520PtToPtSentryTime | 0 | 0 | The Point to point sentry time nms520PtToPtSentryTime, is used to control the amount of time between unsolicited alarm responses… |
| 1.3.6.1.4.1.498.8.2.2.1.5 | nms520MtpointRmRspIntrvl | 0 | 0 | The multipoint remote response interval nms520MtpointRmRspIntrvl, is used to control the amount of time between unsolicited alar… |
| 1.3.6.1.4.1.498.8.2.2.1.6 | nms520DtePortType | 0 | 0 | The value auto(3), indicates that the DTE port is automatically being detected, and set. The rs232(1), will force the DTE port to… |
| 1.3.6.1.4.1.498.8.2.2.1.7 | nms520DteCtsDelay | 0 | 0 | RTS/CTS Delay options ctsOn(1) Forces both RTS and CTS On regardless of the state of the attached business equipment (the transmi… |
| 1.3.6.1.4.1.498.8.2.2.1.8 | nms520DteCtsDelayExt | 0 | 0 | RTS/CTS Delay options extension ext0mSec(1) Used to enable options cts0mSec(2) or ctsFix3Char(3) from MIB object nms520DteCtsDelay… |
| 1.3.6.1.4.1.498.8.2.2.1.9 | nms520FirmwareLevel | 0 | 0 | None |
| 1.3.6.1.4.1.498.8.2.2.1.10 | nms520DaisyChainBps | 0 | 0 | Indicates the data rate at which the management data is sent/received when the gdcNmsManagementSource is daisyChain(4). |
| 1.3.6.1.4.1.498.8.2.2.1.11 | nms520AlarmCfgCountWindow | 0 | 0 | The DDS Alarm Threshold Alarm Interval. It specifies the amount of time in minutes, 1 to 15 minutes, in which the threshold sett… |
| 1.3.6.1.4.1.498.8.2.2.1.12 | nms520SoftReset | 0 | 0 | This object will cause software reset in dataset. |
| 1.3.6.1.4.1.498.8.2.2.1.13 | nms520FrontPanelInhibit | 0 | 0 | Inhibits all front panel test switches. If a test switch is activated while inhibited it will simply be ignored. If enabled via … |
| 1.3.6.1.4.1.498.8.2.2.1.14 | nms520FrontPanelEnable | 0 | 0 | Enables all front panel test switches. If a test switch is activated while inhibited, via the nms520FrontPanelInhibit object, it… |
| 1.3.6.1.4.1.498.8.2.2.1.15 | nms520HdlcInvert | 0 | 0 | Primary data invert option. Will enhance the quality of data when network does not provide B8Z5. Primarily used with DDS II 56k |
| 1.3.6.1.4.1.498.8.2.2.1.16 | nms520PiggyBackDetect | 0 | 0 | If set to 2 then either a Data Rate Adadaptor or 530 card is installed. |
| 1.3.6.1.4.1.498.8.2.2.1.17 | nms520UnitType | 0 | 0 | with IFP(2) means that the unit has a LCD configurable display. single-height(1) means that the unit does NOT have a LCD configur… |
| 1.3.6.1.4.1.498.8.2.2.1.18 | nms520ExtPortCtrlOut1 | 0 | 0 | This option sets the external output state (on/off) of the current network element and displays the external output. |
| 1.3.6.1.4.1.498.8.2.2.1.19 | nms520ExtPortCtrlOut2 | 0 | 0 | This option sets the external output state (on/off) of the current network element and displays the external output. |