snmp540LineStats OBJECT IDENTIFIER ::= { snmp540 6 }
Vendor: General DataComm, Inc.
Module: SNMP540-MGMT-MIB
[Automatically extracted from oidview.com]
snmp540LineStats OBJECT IDENTIFIER ::= { snmp540 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.8.4.6.1 | snmp540LineStatsInterval | 1 | 1 | The DDS Line Statistics Interval specifies the amount of LineStats data to be reported. Measurements are stored every minute and a… |
| 1.3.6.1.4.1.498.8.4.6.2 | snmp540LineStatsTxLevel | 1 | 1 | Transmit level being generated into the private line circuit. This value is typically 6db. |
| 1.3.6.1.4.1.498.8.4.6.3 | snmp540LineStatsRxInterpretation | 1 | 1 | This object the characterizes LineStats readings. Interpretation code Meaning ..................... ..........................… |
| 1.3.6.1.4.1.498.8.4.6.4 | snmp540LineStatsRxLevel | 1 | 1 | This object reports the receive level measurement for the selected interval. The range reported is from -50dB to +6dB. |
| 1.3.6.1.4.1.498.8.4.6.5 | snmp540LineStatsSignalToNoiseRatio | 1 | 1 | This object will the report the signal to noise ratio ranging from 0db to 50db for the selected interval. The value is absolute. I… |
| 1.3.6.1.4.1.498.8.4.6.6 | snmp540LineStatsSignalQuality | 1 | 1 | This object reports the signal quality of the line, for the selected interval. |
| 1.3.6.1.4.1.498.8.4.6.7 | snmp540LineStatsJitter | 1 | 1 | This object will the report the percent jitter of the line, for the selected interval. |
| 1.3.6.1.4.1.498.8.4.6.8 | snmp540LineStatsBpvCount | 1 | 1 | This object will the report the number of bipolar violation codes received during for the selected LineStatsInterval. |
| 1.3.6.1.4.1.498.8.4.6.9 | snmp540LineStatsFrameLossCount | 1 | 1 | This object will the report the number frame losses received for the selected LineStatsInterval. |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.8.4.1 | snmp540AlarmTrap, snmp540MIBversion | 1 | 1 | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y'identif… |
| 1.3.6.1.4.1.498.8.4.2 | snmp540Config | 3 | 13 | None |
| 1.3.6.1.4.1.498.8.4.3 | snmp540Control | 1 | 2 | None |
| 1.3.6.1.4.1.498.8.4.4 | snmp540AlarmData | 18 | 18 | None |
| 1.3.6.1.4.1.498.8.4.5 | snmp540AlarmCfgThr | 2 | 6 | None |
| 1.3.6.1.4.1.498.8.4.7 | snmp540DiagTest | 7 | 14 | None |
| 1.3.6.1.4.1.498.8.4.8 | snmp540Led | 1 | 2 | None |
| 1.3.6.1.4.1.498.8.4.9 | snmp540DeviceSerialNumber | 1 | 1 | Display's the unique serial number of this device. The octet string starts with the two byte product code (0540) followed by a re… |
| 1.3.6.1.4.1.498.8.4.10 | snmp540Alarm | 5 | 17 | None |