X25 parameters of a specific port.
Parsed from file accX25.my.txt
Company: None
Module: ACC-X25
X25 parameters of a specific port.
Parsed from file ACC-X25.mib
Module: ACC-X25
Vendor: ACC
Module: ACC-X25
[Automatically extracted from oidview.com]
accX25PortParmEntry OBJECT-TYPE SYNTAX AccX25PortParmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " X25 parameters of a specific port." INDEX { accX25PortParmIndex } ::= { accX25PortParmTable 1 }
accX25PortParmEntry OBJECT-TYPE SYNTAX AccX25PortParmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION " X25 parameters of a specific port." INDEX { accX25PortParmIndex } ::= { accX25PortParmTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.17.3.1.1 | accX25PortParmIndex, sbeX25PortParmIndex | 0 | 0 | Port number |
1.3.6.1.4.1.5.1.1.17.3.1.2 | accX25AddrMode, sbeX25AddrMode | 0 | 0 | specifies address translation technique. |
1.3.6.1.4.1.5.1.1.17.3.1.3 | accX25PktSize, sbeX25PktSize | 0 | 0 | specifies default data packet size for this port. |
1.3.6.1.4.1.5.1.1.17.3.1.4 | accX25PktWind, sbeX25PktWind | 0 | 0 | specifies default packet window size for this port. |
1.3.6.1.4.1.5.1.1.17.3.1.5 | accX25SvcNumber, sbeX25SvcNumber | 0 | 0 | specifies maximum number of switched virtual circuits to be used on this port. |
1.3.6.1.4.1.5.1.1.17.3.1.6 | accX25SvcBase, sbeX25SvcBase | 0 | 0 | specifies lowest Logical Channel Identifier to be used for switched virtual circuits. |
1.3.6.1.4.1.5.1.1.17.3.1.7 | accX25ExtendClr, sbeX25ExtendClr | 0 | 0 | specifies whether extended format for call clearing packets (as defined by X.25-1984) is permitted |
1.3.6.1.4.1.5.1.1.17.3.1.8 | accX25ExtendSeq, sbeX25ExtendSeq | 0 | 0 | Use of extended sequence numbers |
1.3.6.1.4.1.5.1.1.17.3.1.9 | accX25IdleMin, sbeX25IdleMin | 0 | 0 | minimum idle time for closing circuits; a circuit will not be cleared until it has been idle (no data has been sent or received) … |
1.3.6.1.4.1.5.1.1.17.3.1.10 | accX25IdleMax, sbeX25IdleMax | 0 | 0 | maximum idle time for closing circuits; a circuit will be cleared when its idle time exceeds this value. |
1.3.6.1.4.1.5.1.1.17.3.1.11 | accX25IdleScale, sbeX25IdleScale | 0 | 0 | scale factor for idle timeout: a circuit will be cleared when it has been idle for accX25IdleMin plus accX25IdleScale times the n… |
1.3.6.1.4.1.5.1.1.17.3.1.12 | accX25SvcMax | 0 | 0 | Maximum number of virtual circuits which can be opened to a single destination. |
1.3.6.1.4.1.5.1.1.17.3.1.13 | accX25SvcLimit | 0 | 0 | Maximum number of switched virtual circuits that IP can use. The value must not exceed the total number of logical channels avai… |
1.3.6.1.4.1.5.1.1.17.3.1.14 | accX25OpenThresh | 0 | 0 | Threshold (number of IP datagrams queued per circuit) at which an additional virtual circuit will be opened. |
1.3.6.1.4.1.5.1.1.17.3.1.15 | accX25SvcMin | 0 | 0 | The minimum number of virtual circuits which IP will leave available for first circuits to other destinations |
1.3.6.1.4.1.5.1.1.17.3.1.16 | accX25SvcDelay | 0 | 0 | Delay (seconds) between opening of successive virtual circuits to same destination. |
1.3.6.1.4.1.5.1.1.17.3.1.17 | accX25InitBackoff | 0 | 0 | Initial backoff time (seconds) to delay before next attempt to open an additional virtual circuit to the same destination when an… |
1.3.6.1.4.1.5.1.1.17.3.1.18 | accX25MaxBackoff | 0 | 0 | Maximum backoff time (seconds) to delay between subsequent attempts to open additional virtual circuits to the same destination. … |
1.3.6.1.4.1.5.1.1.17.3.1.19 | accX25OurAddress | 0 | 0 | Our X25 address (put in outbound packets) |
1.3.6.1.4.1.5.1.1.17.3.1.20 | accX25PvcBase | 0 | 0 | Lowest LCID to be used for PVCs. |
1.3.6.1.4.1.5.1.1.17.3.1.21 | accX25PvcNumber | 0 | 0 | Maximum number of PVCs. |
1.3.6.1.4.1.5.1.1.17.3.1.22 | accX25Tx0Timer | 0 | 0 | Value for T10 (DCE) or T20 (DTE) timer. |
1.3.6.1.4.1.5.1.1.17.3.1.23 | accX25Tx1Timer | 0 | 0 | Value for T11 (DCE) or T21 (DTE) timer. |
1.3.6.1.4.1.5.1.1.17.3.1.24 | accX25Tx2Timer | 0 | 0 | Value for T12 (DCE) or T22 (DTE) timer. |
1.3.6.1.4.1.5.1.1.17.3.1.25 | accX25Tx3Timer | 0 | 0 | Value for T13 (DCE) or T23 (DTE) timer. |
1.3.6.1.4.1.5.1.1.17.3.1.26 | accX25PortEventSeverityLevel | 0 | 0 | The base severity level which events are recorded. |