Used to set the message level for MSP. 7 being most
robust.
Parsed from file accMsp.my.txt
Company: None
Module: ACC-MSP
Used to set the message level for MSP. 7 being most
robust.
Parsed from file ACC-MSP.mib
Module: ACC-MSP
Vendor: ACC
Module: ACC-MSP
[Automatically extracted from oidview.com]
accMspMessageLevel OBJECT-TYPE SYNTAX INTEGER (1..7) ACCESS read-write STATUS mandatory DESCRIPTION "Used to set the message level for MSP. 7 being most robust." DEFVAL { 1 } ::= { accMspGeneralScalars 10 }
accMspMessageLevel OBJECT-TYPE SYNTAX INTEGER (1..7) ACCESS read-write STATUS mandatory DESCRIPTION "Used to set the message level for MSP. 7 being most robust." DEFVAL { 1 } ::= { accMspGeneralScalars 10 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.76.1.10.0 | accMspMessageLevel | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.76.1.1 | accMspAdminState | 1 | 1 | MSP Adminstrative state. |
1.3.6.1.4.1.5.1.1.76.1.2 | accMspMode | 1 | 1 | MSP Mode : WAIT means that MSP requires its neighbors to respond only if they want the call. ACKNOWLEDGE causes all the MSP neigh… |
1.3.6.1.4.1.5.1.1.76.1.3 | accMspDelivery | 1 | 1 | Sets the delivery mechanism for MSP packets. |
1.3.6.1.4.1.5.1.1.76.1.4 | accMspGroupId | 1 | 1 | MSP Group Identifier, should be the same value on all MSP NASs. |
1.3.6.1.4.1.5.1.1.76.1.5 | accMspInterfaceAddress | 1 | 1 | The interface address in which the MSP protocol is to operate over |
1.3.6.1.4.1.5.1.1.76.1.6 | accMspUdpPort | 1 | 1 | Changes the default UDP port number that MSP uses when sending and listening for MSP packets. |
1.3.6.1.4.1.5.1.1.76.1.7 | accMspMaximumTimeout | 1 | 1 | Maximum amount of time MSP will wait for an MSP neighbor to respond to a request. |
1.3.6.1.4.1.5.1.1.76.1.8 | accMspMaximumRetransmissions | 1 | 1 | Used to configure the maximum number of retransmissions that MSP will send to an MSP neighbor before designating the neighbors as… |
1.3.6.1.4.1.5.1.1.76.1.9 | accMspMaximumHistorySize | 1 | 1 | Used to configure the maximum history buffer size. Must be in powers of 2. |
1.3.6.1.4.1.5.1.1.76.1.11 | accMspDebugMask | 1 | 1 | Used to selectively enable and disable MSP trap messages used for debugging. The debug messages are different from regular traps. |
1.3.6.1.4.1.5.1.1.76.1.12 | accMspStatInPackets | 1 | 1 | Indicates the total number of MSP packets received from all MSP neighbors, both unicast and multicast packets. |
1.3.6.1.4.1.5.1.1.76.1.13 | accMspStatOutPackets | 1 | 1 | Indicates the total number of MSP packets sent, including both unicast and multicast packets. |
1.3.6.1.4.1.5.1.1.76.1.14 | accMspStatInQueries | 1 | 1 | Indicates the number of MSP Query Requests that have been received from MSP neighbors. |
1.3.6.1.4.1.5.1.1.76.1.15 | accMspStatOutQueries | 1 | 1 | Indicates the number of MSP Query requests that have been sent by this RAC. A MSP Query request is sent for each new Multilink c… |
1.3.6.1.4.1.5.1.1.76.1.16 | accMspStatInAcks | 1 | 1 | Indicates the number of MSP acknowledge packets received by this RAC |
1.3.6.1.4.1.5.1.1.76.1.17 | accMspStatOutAcks | 1 | 1 | Indicates the number of MSP acknowledges sent by this RAC. |
1.3.6.1.4.1.5.1.1.76.1.18 | accMspStatInRequests | 1 | 1 | Indicates the number of times a MSP neighbor has requested a remote client session from this RAC. |
1.3.6.1.4.1.5.1.1.76.1.19 | accMspStatOutRequests | 1 | 1 | Indicates the number of times This RAC has requested a remote client session from a MSP neighbor. |
1.3.6.1.4.1.5.1.1.76.1.20 | accMspStatInDiscards | 1 | 1 | Indicates the number of times the local MSP protocol has discarded MSP packets.This counter increases if MSP receives a MSP packe… |
1.3.6.1.4.1.5.1.1.76.1.21 | accMspStatProcessingErrors | 1 | 1 | Indicates the number of times the MSP protocol has failed to process a MSP packet. Failures arise from conditions where the packe… |
1.3.6.1.4.1.5.1.1.76.1.22 | accMspStatNotForMes | 1 | 1 | Indicates number of times an MSP acknowledgment to a query not generated by this RAC has been received by this MSP protocol entit… |
1.3.6.1.4.1.5.1.1.76.1.23 | accMspStatProtocolErrors | 1 | 1 | Indicates the number of times this MSP protocol entity has encountered MSP protocol errors in processing a MSP packet. |
1.3.6.1.4.1.5.1.1.76.1.24 | accMspStatInQueryPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.25 | accMspStatOutQueryPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.26 | accMspStatInAckPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.27 | accMspStatOutAckPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.28 | accMspStatQueryTimeouts | 1 | 1 | Indicates the number of times the local MSP protocol entity has timed out while waiting for a query response. This is normal in T… |
1.3.6.1.4.1.5.1.1.76.1.29 | accMspStatMemoryFails | 1 | 1 | Indicates the number of times this MSP protocol entity has failed to acquire memory when performing its protocol operations. |
1.3.6.1.4.1.5.1.1.76.1.30 | accMspStatAverageQueryClosure | 1 | 1 | Indicates the average time to close a MSP Query Request. When in TIMEOUT mode, this value coincides with the configured maximum t… |
1.3.6.1.4.1.5.1.1.76.1.31 | accMspStatCurrentTimeout | 1 | 1 | indicates the current timeout value being used. In TIMEOUT mode, this will always be the maximum timeout value. In ACKNOWLEDGE m… |