MSP Mode : WAIT means that MSP requires its neighbors to
respond only if they want the call. ACKNOWLEDGE causes all
the MSP neighbors to respond to every request
Parsed from file accMsp.my.txt
Company: None
Module: ACC-MSP
MSP Mode : WAIT means that MSP requires its neighbors to
respond only if they want the call. ACKNOWLEDGE causes all
the MSP neighbors to respond to every request
Parsed from file ACC-MSP.mib
Module: ACC-MSP
Vendor: ACC
Module: ACC-MSP
[Automatically extracted from oidview.com]
accMspMode OBJECT-TYPE SYNTAX INTEGER { wait(1), acknowledge(2) } ACCESS read-write STATUS mandatory DESCRIPTION "MSP Mode : WAIT means that MSP requires its neighbors to respond only if they want the call. ACKNOWLEDGE causes all the MSP neighbors to respond to every request" DEFVAL { wait } ::= { accMspGeneralScalars 2 }
accMspMode OBJECT-TYPE SYNTAX INTEGER { wait(1), acknowledge(2) } ACCESS read-write STATUS mandatory DESCRIPTION "MSP Mode : WAIT means that MSP requires its neighbors to respond only if they want the call. ACKNOWLEDGE causes all the MSP neighbors to respond to every request" DEFVAL { wait } ::= { accMspGeneralScalars 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.76.1.2.0 | accMspMode | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.5.1.1.76.1.1 | accMspAdminState | 1 | 1 | MSP Adminstrative state. |
1.3.6.1.4.1.5.1.1.76.1.3 | accMspDelivery | 1 | 1 | Sets the delivery mechanism for MSP packets. |
1.3.6.1.4.1.5.1.1.76.1.4 | accMspGroupId | 1 | 1 | MSP Group Identifier, should be the same value on all MSP NASs. |
1.3.6.1.4.1.5.1.1.76.1.5 | accMspInterfaceAddress | 1 | 1 | The interface address in which the MSP protocol is to operate over |
1.3.6.1.4.1.5.1.1.76.1.6 | accMspUdpPort | 1 | 1 | Changes the default UDP port number that MSP uses when sending and listening for MSP packets. |
1.3.6.1.4.1.5.1.1.76.1.7 | accMspMaximumTimeout | 1 | 1 | Maximum amount of time MSP will wait for an MSP neighbor to respond to a request. |
1.3.6.1.4.1.5.1.1.76.1.8 | accMspMaximumRetransmissions | 1 | 1 | Used to configure the maximum number of retransmissions that MSP will send to an MSP neighbor before designating the neighbors as… |
1.3.6.1.4.1.5.1.1.76.1.9 | accMspMaximumHistorySize | 1 | 1 | Used to configure the maximum history buffer size. Must be in powers of 2. |
1.3.6.1.4.1.5.1.1.76.1.10 | accMspMessageLevel | 1 | 1 | Used to set the message level for MSP. 7 being most robust. |
1.3.6.1.4.1.5.1.1.76.1.11 | accMspDebugMask | 1 | 1 | Used to selectively enable and disable MSP trap messages used for debugging. The debug messages are different from regular traps. |
1.3.6.1.4.1.5.1.1.76.1.12 | accMspStatInPackets | 1 | 1 | Indicates the total number of MSP packets received from all MSP neighbors, both unicast and multicast packets. |
1.3.6.1.4.1.5.1.1.76.1.13 | accMspStatOutPackets | 1 | 1 | Indicates the total number of MSP packets sent, including both unicast and multicast packets. |
1.3.6.1.4.1.5.1.1.76.1.14 | accMspStatInQueries | 1 | 1 | Indicates the number of MSP Query Requests that have been received from MSP neighbors. |
1.3.6.1.4.1.5.1.1.76.1.15 | accMspStatOutQueries | 1 | 1 | Indicates the number of MSP Query requests that have been sent by this RAC. A MSP Query request is sent for each new Multilink c… |
1.3.6.1.4.1.5.1.1.76.1.16 | accMspStatInAcks | 1 | 1 | Indicates the number of MSP acknowledge packets received by this RAC |
1.3.6.1.4.1.5.1.1.76.1.17 | accMspStatOutAcks | 1 | 1 | Indicates the number of MSP acknowledges sent by this RAC. |
1.3.6.1.4.1.5.1.1.76.1.18 | accMspStatInRequests | 1 | 1 | Indicates the number of times a MSP neighbor has requested a remote client session from this RAC. |
1.3.6.1.4.1.5.1.1.76.1.19 | accMspStatOutRequests | 1 | 1 | Indicates the number of times This RAC has requested a remote client session from a MSP neighbor. |
1.3.6.1.4.1.5.1.1.76.1.20 | accMspStatInDiscards | 1 | 1 | Indicates the number of times the local MSP protocol has discarded MSP packets.This counter increases if MSP receives a MSP packe… |
1.3.6.1.4.1.5.1.1.76.1.21 | accMspStatProcessingErrors | 1 | 1 | Indicates the number of times the MSP protocol has failed to process a MSP packet. Failures arise from conditions where the packe… |
1.3.6.1.4.1.5.1.1.76.1.22 | accMspStatNotForMes | 1 | 1 | Indicates number of times an MSP acknowledgment to a query not generated by this RAC has been received by this MSP protocol entit… |
1.3.6.1.4.1.5.1.1.76.1.23 | accMspStatProtocolErrors | 1 | 1 | Indicates the number of times this MSP protocol entity has encountered MSP protocol errors in processing a MSP packet. |
1.3.6.1.4.1.5.1.1.76.1.24 | accMspStatInQueryPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.25 | accMspStatOutQueryPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.26 | accMspStatInAckPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.27 | accMspStatOutAckPiggys | 1 | 1 | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the M… |
1.3.6.1.4.1.5.1.1.76.1.28 | accMspStatQueryTimeouts | 1 | 1 | Indicates the number of times the local MSP protocol entity has timed out while waiting for a query response. This is normal in T… |
1.3.6.1.4.1.5.1.1.76.1.29 | accMspStatMemoryFails | 1 | 1 | Indicates the number of times this MSP protocol entity has failed to acquire memory when performing its protocol operations. |
1.3.6.1.4.1.5.1.1.76.1.30 | accMspStatAverageQueryClosure | 1 | 1 | Indicates the average time to close a MSP Query Request. When in TIMEOUT mode, this value coincides with the configured maximum t… |
1.3.6.1.4.1.5.1.1.76.1.31 | accMspStatCurrentTimeout | 1 | 1 | indicates the current timeout value being used. In TIMEOUT mode, this will always be the maximum timeout value. In ACKNOWLEDGE m… |