The value of the community string to be used in the SNMP
TRAP PDU when a trap is generated.
Parsed from file dlm-mib.mib.txt
Company: None
Module: DLM-MIB
The value of the community string to be used in the SNMP
TRAP PDU when a trap is generated.
Parsed from file DLM-MIB.mib
Module: DLM-MIB
snmpPollTrapCommunity OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The value of the community string to be used in the SNMP TRAP PDU when a trap is generated." DEFVAL { "public" } ::= { snmpPollEntry 14 }
Vendor: Enterasys Networks Inc.
Module: DLM-MIB
[Automatically extracted from oidview.com]
snmpPollTrapCommunity OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The value of the community string to be used in the SNMP TRAP PDU when a trap is generated." DEFVAL { "public" } ::= { snmpPollEntry 14 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.1.1.1.1 | snmpPollDestination | 0 | 0 | The IP address of the host/device to be polled. |
| 1.3.6.1.4.1.52.4.2.1.1.1.2 | snmpPollOwner | 0 | 0 | The IP address of the client which created this poll request entry. |
| 1.3.6.1.4.1.52.4.2.1.1.1.3 | snmpPollCommunity | 0 | 0 | The value of the community string to be used in the SNMP REQUEST PDU when actively polling. Note that this community name string… |
| 1.3.6.1.4.1.52.4.2.1.1.1.4 | snmpPollInterval | 0 | 0 | The value of the interval (in seconds) on which to poll the destination address with the OIDs defined in the OID table assigned t… |
| 1.3.6.1.4.1.52.4.2.1.1.1.5 | snmpPollRetry | 0 | 0 | The value of the number of times to retry a failed poll request prior to considering it a failure. |
| 1.3.6.1.4.1.52.4.2.1.1.1.6 | snmpPollAction | 0 | 0 | The indication of the action to take when a poll request is considered to have failed. A value of 'no-action' will allow the pol… |
| 1.3.6.1.4.1.52.4.2.1.1.1.7 | snmpPollTrapAddress | 0 | 0 | The IP address to which to send the SNMP TRAP if the poll is considered a failure and the action is defined as send-trap. The def… |
| 1.3.6.1.4.1.52.4.2.1.1.1.8 | snmpPollType | 0 | 0 | The administrative control of this poll request entry. This leaf is used to trigure an active request (begin polling), suspend p… |
| 1.3.6.1.4.1.52.4.2.1.1.1.9 | snmpPollStatus | 0 | 0 | The operational status of this poll request entry. This leaf is used to indicate the state of the last valid poll request. |
| 1.3.6.1.4.1.52.4.2.1.1.1.10 | snmpPollRequests | 0 | 0 | Indicates the number of poll requests (SNMP GET REQUEST PDUs) have been issued for this poll entry. |
| 1.3.6.1.4.1.52.4.2.1.1.1.11 | snmpPollLastContact | 0 | 0 | Indicates the value of the sysUpTime when the last poll response was received from the polled host/device for which this poll ent… |
| 1.3.6.1.4.1.52.4.2.1.1.1.12 | snmpPollLastAlarm | 0 | 0 | Indicates the value of the sysUpTime when the last alarm was generated for this poll request entry. |
| 1.3.6.1.4.1.52.4.2.1.1.1.13 | snmpPollAlarmWait | 0 | 0 | Indicates the number of seconds to wait prior to sending another alarm. This is to ensure that alarms do not flood out upon devi… |
| 1.3.6.1.4.1.52.4.2.1.1.1.15 | snmpPollProtocol | 0 | 0 | Indicates the protocol to use to poll the host/device. If snmp is chosen, there must be at least one corresponding OID Table Ent… |