The value of the interval (in seconds) on which to poll the
destination address with the OIDs defined in the OID table
assigned to this poll entry. This interval defines how often
an SNMP GET REQUEST PDU will be originated from this host
device to the polled address.
Parsed from file dlm-mib.mib.txt
Company: None
Module: DLM-MIB
The value of the interval (in seconds) on which to poll the
destination address with the OIDs defined in the OID table
assigned to this poll entry. This interval defines how often
an SNMP GET REQUEST PDU will be originated from this host
device to the polled address.
Parsed from file DLM-MIB.mib
Module: DLM-MIB
snmpPollInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of the interval (in seconds) on which to poll the destination address with the OIDs defined in the OID table assigned to this poll entry. This interval defines how often an SNMP GET REQUEST PDU will be originated from this host device to the polled address." DEFVAL { 60 } ::= { snmpPollEntry 4 }
Vendor: Enterasys Networks Inc.
Module: DLM-MIB
[Automatically extracted from oidview.com]
snmpPollInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The value of the interval (in seconds) on which to poll the destination address with the OIDs defined in the OID table assigned to this poll entry. This interval defines how often an SNMP GET REQUEST PDU will be originated from this host device to the polled address." DEFVAL { 60 } ::= { snmpPollEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.1.1.1.1 | snmpPollDestination | 0 | 0 | The IP address of the host/device to be polled. |
| 1.3.6.1.4.1.52.4.2.1.1.1.2 | snmpPollOwner | 0 | 0 | The IP address of the client which created this poll request entry. |
| 1.3.6.1.4.1.52.4.2.1.1.1.3 | snmpPollCommunity | 0 | 0 | The value of the community string to be used in the SNMP REQUEST PDU when actively polling. Note that this community name string… |
| 1.3.6.1.4.1.52.4.2.1.1.1.5 | snmpPollRetry | 0 | 0 | The value of the number of times to retry a failed poll request prior to considering it a failure. |
| 1.3.6.1.4.1.52.4.2.1.1.1.6 | snmpPollAction | 0 | 0 | The indication of the action to take when a poll request is considered to have failed. A value of 'no-action' will allow the pol… |
| 1.3.6.1.4.1.52.4.2.1.1.1.7 | snmpPollTrapAddress | 0 | 0 | The IP address to which to send the SNMP TRAP if the poll is considered a failure and the action is defined as send-trap. The def… |
| 1.3.6.1.4.1.52.4.2.1.1.1.8 | snmpPollType | 0 | 0 | The administrative control of this poll request entry. This leaf is used to trigure an active request (begin polling), suspend p… |
| 1.3.6.1.4.1.52.4.2.1.1.1.9 | snmpPollStatus | 0 | 0 | The operational status of this poll request entry. This leaf is used to indicate the state of the last valid poll request. |
| 1.3.6.1.4.1.52.4.2.1.1.1.10 | snmpPollRequests | 0 | 0 | Indicates the number of poll requests (SNMP GET REQUEST PDUs) have been issued for this poll entry. |
| 1.3.6.1.4.1.52.4.2.1.1.1.11 | snmpPollLastContact | 0 | 0 | Indicates the value of the sysUpTime when the last poll response was received from the polled host/device for which this poll ent… |
| 1.3.6.1.4.1.52.4.2.1.1.1.12 | snmpPollLastAlarm | 0 | 0 | Indicates the value of the sysUpTime when the last alarm was generated for this poll request entry. |
| 1.3.6.1.4.1.52.4.2.1.1.1.13 | snmpPollAlarmWait | 0 | 0 | Indicates the number of seconds to wait prior to sending another alarm. This is to ensure that alarms do not flood out upon devi… |
| 1.3.6.1.4.1.52.4.2.1.1.1.14 | snmpPollTrapCommunity | 0 | 0 | The value of the community string to be used in the SNMP TRAP PDU when a trap is generated. |
| 1.3.6.1.4.1.52.4.2.1.1.1.15 | snmpPollProtocol | 0 | 0 | Indicates the protocol to use to poll the host/device. If snmp is chosen, there must be at least one corresponding OID Table Ent… |