Controls the operation of Poison Reverse on the router port for
which the entry exists. When Poison Reverse is enabled, SAP
advertises any downed server as unreachable during the period of time
that it must wait (nwIpxSapIfHoldDown) before removing the server
from the server table.
Parsed from file ctipx-mib.mib.txt
Company: None
Module: CTRON-IPX-ROUTER-MIB
Controls the operation of Poison Reverse on the router port for
which the entry exists. When Poison Reverse is enabled, SAP
advertises any downed server as unreachable during the period of time
that it must wait (nwIpxSapIfHoldDown) before removing the server
from the server table.
Parsed from file CTRON-IPX-ROUTER-MIB.mib
Module: CTRON-IPX-ROUTER-MIB
nwIpxSapIfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls the operation of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, SAP advertises any downed server as unreachable during the period of time that it must wait (nwIpxSapIfHoldDown) before removing the server from the server table." DEFVAL { disabled } ::= { nwIpxSapIfEntry 12 }
Vendor: Enterasys Networks Inc.
Module: CTRON-IPX-ROUTER-MIB
[Automatically extracted from oidview.com]
nwIpxSapIfPoisonReverse OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Controls the operation of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, SAP advertises any downed server as unreachable during the period of time that it must wait (nwIpxSapIfHoldDown) before removing the server from the server table." DEFVAL { disabled } ::= { nwIpxSapIfEntry 12 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.1 | nwIpxSapIfIndex | 0 | 0 | Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.2 | nwIpxSapIfAdminStatus | 0 | 0 | Sets the administrative state of the SAP protocol on the router port for which the entry exists. Enabled (3) causes SAP to becom… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.3 | nwIpxSapIfOperStatus | 0 | 0 | Indicates the current operating condition of the SAP protocol on the router port for which the entry exists. The value of nwIpxSa… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.4 | nwIpxSapIfOperationalTime | 0 | 0 | Indicates the elapsed time, in hundredths of a second, that nwIpxSapIfOperStatus has been in its current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.5 | nwIpxSapIfVersion | 0 | 0 | Indicates the revision level of the SAP protocol in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.6 | nwIpxSapIfAdvertisement | 0 | 0 | Sets the interval, in seconds, at which SAP advertises its server table on the router port for which the entry exists. Change th… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.7 | nwIpxSapIfFloodDelay | 0 | 0 | Specifies the length of time, in seconds, that the SAP protocol will wait after discovering that a directly connected route has … |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.8 | nwIpxSapIfRequestDelay | 0 | 0 | Specifies the length of time, in seconds, that the SAP protocol will wait after receiving a server request packet, before sendin… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.9 | nwIpxSapIfPriority | 0 | 0 | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a managemen… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.10 | nwIpxSapIfHelloTimer | 0 | 0 | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a managemen… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.11 | nwIpxSapIfSplitHorizon | 0 | 0 | Controls the operation of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, SAP keeps … |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.13 | nwIpxSapIfSnooping | 0 | 0 | Controls the operation of SAP Snooping on the router port. When SAP Snooping is enabled SAP operates in passive mode, so it rece… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.14 | nwIpxSapIfType | 0 | 0 | nwIpxSapIftype |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.15 | nwIpxSapIfXmitCost | 0 | 0 | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common ma… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.16 | nwIpxSapIfAclIdentifier | 0 | 0 | Specifies the Access Control List ID of the access control list in effect for SAP protocol packets on the router port for which … |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.17 | nwIpxSapIfAclStatus | 0 | 0 | Controls the operation of the access control list identified by nwIpxSapIfAclIdentifier. Enabled (3) causes the access control l… |