Indicates the current operating condition of the SAP protocol on the
router port for which the entry exists. The value of
nwIpxSapIfOperStatus indicates any problem with your SAP configuration
on the router port. A value of 6 indicates that regardless of the
value of nwIpxSapIfAdminStatus. SAP is not operating because of an
invalid configuration.
Parsed from file ctipx-mib.mib.txt
Company: None
Module: CTRON-IPX-ROUTER-MIB
Indicates the current operating condition of the SAP protocol on the
router port for which the entry exists. The value of
nwIpxSapIfOperStatus indicates any problem with your SAP configuration
on the router port. A value of 6 indicates that regardless of the
value of nwIpxSapIfAdminStatus. SAP is not operating because of an
invalid configuration.
Parsed from file CTRON-IPX-ROUTER-MIB.mib
Module: CTRON-IPX-ROUTER-MIB
nwIpxSapIfOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current operating condition of the SAP protocol on the router port for which the entry exists. The value of nwIpxSapIfOperStatus indicates any problem with your SAP configuration on the router port. A value of 6 indicates that regardless of the value of nwIpxSapIfAdminStatus. SAP is not operating because of an invalid configuration." ::= { nwIpxSapIfEntry 3 }
Vendor: Enterasys Networks Inc.
Module: CTRON-IPX-ROUTER-MIB
[Automatically extracted from oidview.com]
nwIpxSapIfOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), pending-disable(4), pending-enable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current operating condition of the SAP protocol on the router port for which the entry exists. The value of nwIpxSapIfOperStatus indicates any problem with your SAP configuration on the router port. A value of 6 indicates that regardless of the value of nwIpxSapIfAdminStatus. SAP is not operating because of an invalid configuration." ::= { nwIpxSapIfEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.1 | nwIpxSapIfIndex | 0 | 0 | Indicates the value of MIB 2 ifindex, which identifies the router port for which the entry exists. |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.2 | nwIpxSapIfAdminStatus | 0 | 0 | Sets the administrative state of the SAP protocol on the router port for which the entry exists. Enabled (3) causes SAP to becom… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.4 | nwIpxSapIfOperationalTime | 0 | 0 | Indicates the elapsed time, in hundredths of a second, that nwIpxSapIfOperStatus has been in its current state. |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.5 | nwIpxSapIfVersion | 0 | 0 | Indicates the revision level of the SAP protocol in textual format. |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.6 | nwIpxSapIfAdvertisement | 0 | 0 | Sets the interval, in seconds, at which SAP advertises its server table on the router port for which the entry exists. Change th… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.7 | nwIpxSapIfFloodDelay | 0 | 0 | Specifies the length of time, in seconds, that the SAP protocol will wait after discovering that a directly connected route has … |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.8 | nwIpxSapIfRequestDelay | 0 | 0 | Specifies the length of time, in seconds, that the SAP protocol will wait after receiving a server request packet, before sendin… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.9 | nwIpxSapIfPriority | 0 | 0 | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a managemen… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.10 | nwIpxSapIfHelloTimer | 0 | 0 | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a managemen… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.11 | nwIpxSapIfSplitHorizon | 0 | 0 | Controls the operation of Split Horizon on the router port for which the entry exists. When Split Horizon is enabled, SAP keeps … |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.12 | nwIpxSapIfPoisonReverse | 0 | 0 | Controls the operation of Poison Reverse on the router port for which the entry exists. When Poison Reverse is enabled, SAP adver… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.13 | nwIpxSapIfSnooping | 0 | 0 | Controls the operation of SAP Snooping on the router port. When SAP Snooping is enabled SAP operates in passive mode, so it rece… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.14 | nwIpxSapIfType | 0 | 0 | nwIpxSapIftype |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.15 | nwIpxSapIfXmitCost | 0 | 0 | This object does not apply to this protocol. It is a common object, inherited from the MIB framework used to provide a common ma… |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.16 | nwIpxSapIfAclIdentifier | 0 | 0 | Specifies the Access Control List ID of the access control list in effect for SAP protocol packets on the router port for which … |
| 1.3.6.1.4.1.52.4.2.2.2.3.2.2.4.1.2.2.1.1.1.17 | nwIpxSapIfAclStatus | 0 | 0 | Controls the operation of the access control list identified by nwIpxSapIfAclIdentifier. Enabled (3) causes the access control l… |